Jump to content
SAU Community

Recommended Posts

Hi all,

As some of you may know, my R33 GTR met the unfortunate end at DECA yesterday, I essentially drove into armco...

I'm wiritng this thread to express my thanks to whoever helped me yesterday.

Paul (paulr33), you're bloody legend! He went greater length to look after me and my brother who rode with me when I 'introduce' the R into armco, he kindly went out of his way to cart us to hospital for check up and dropping us home.

Jack of Citywide Towing, many thanks for coming out on Saturday to tow my R from the crash site to my place, top bloke, willing to go out of his way to help us.

Dave and Hamish, thanks for sticking around at hospital along with Paul when Dermott and I were inside being checked on (and sitting around when they're basically talking to each other).

Thanks to Ryan and Bec, for organising tow truck and checking if we're alright (we walked away from the smash, it wasn't pretty but we're not trapped in the wreck which is a good thing).

Also thanks to whoever came to see if we're ok, also sorry to remaining drivers who didn't get to drive on long wang 2nd run (that is when I crashed), I felt gutted when they had to suspend the run (I believe 10 of them didn't get to do 2nd timing run).

Whoever else that may have help or offer their sympathies etc that I forgot (or can't remember) to mention, I say thanks to you all.

Lastly, I'd like to say thanks to my brother, Dermott who came with me today and unfortunately happened to be my passeneger when I 'demonstrate' my driving skills, and being understanding.

Cheers

Grant

Link to comment
https://www.sau.com.au/forums/topic/344956-my-thanks-thread/
Share on other sites

  • Replies 77
  • Created
  • Last Reply

Top Posters In This Topic

Write off for sure but couple of guys reckon it's fixable...

I won't be fixing it, and I've already recieved a deposit for the wreck.

Yeah I think this GTR is a omen.

:ermm::D:D:O:O:O:O

did this happen towards the beginning of long wang?

dude, so sorry to hear :( glad you guys are alright though, that is definitely something to be thankful for after a motorsport 'incident'

yeah, just make sure everything is ok in the next little bit, you can get delayed reactions to these sort of things

jebus grant glad you both are ok

Thanks.

hey no worries and all part of the service

as long as you guys are OK and no pain etc

how are you feeling this morning? any neck pain etc?

damn those airbags do some damage when they go off

Dermott has bit of cramp on his tummy, his eyes are good now. I felt cramp on my calf but I must have over stretching while I was on my nap last nite. No major pains to report.

Thanks again.

We're all so happy to hear you're both alright. We heard the bang from Mini Wang, stood on the top of the hill and knew it wasn't good.

Thanks, I'm also glad we walked away from the wreck considering how bad it was.

:D:D:O:O:O:O:(

did this happen towards the beginning of long wang?

dude, so sorry to hear :( glad you guys are alright though, that is definitely something to be thankful for after a motorsport 'incident'

yeah, just make sure everything is ok in the next little bit, you can get delayed reactions to these sort of things

Yep happened after the beginning of long wang clockwise, rear end somewhow stepped out and played 'have you met the armco' game into me!

Thanks, once again, cars are replaceable and lives aren't, that is important thing.

Oh I thought the rb26 may end up in the 32 sedan :ermm:

Great to hear youre both ok.

Haha, 26 won't be in the sedan, I've just sold the wreck (my fastest sale ever) 20 mins ago.

Thanks, I'm also glad both of us are ok.

Take it easy.

Cheers

Grant

and i was eyeing off that plenum too.... :D

Why do you want the plenum?

And thanks again for driving me to hospital, pity I don't get to feel what 280rwkw feels like, sorry for taking some of your time from skidpan runs.

So the runs were starting next to the basketball court? Or finishing there?

You're not the first person to meet the scenery down there, such a shame the result is never pretty :ermm:

Clockwise - finish next to basketball court.

Yes, it wasn't pretty but we got out with some bruises - which is a good result considering the outcome.

glad everyone is ok.......good old SAU support =)

Yes, SAU is wonderful club to be part in, helped me twice, gotta give something back...

Why do you want the plenum?

And thanks again for driving me to hospital, pity I don't get to feel what 280rwkw feels like, sorry for taking some of your time from skidpan runs.

well it was about the only part of the motor that didn't meet the armco and i have been thinking about chucking one on the 33

sorry to hear/read about that Grant :ermm:

Thanks mate.

So sorry to hear mate :D Glad that you're both doing well after this. I wish you both a speedy recovery.

Thanks and we're recovering well.

well it was about the only part of the motor that didn't meet the armco and i have been thinking about chucking one on the 33

Yeah? And doing ITBs while you're at it?

Glad you are both ok and made it home safely.

Was a shock when I was told ( I was on the skidpan so oblivious to anything out the back)

Thanks Anna.

Sorry to hear about your newly acquire car :D But you guys are ok and that's the most important thing!

Wasn't newly acquired (bought it 12 months ago), yes we're fine which is good thing and my parents who are in UK at the monent, got message saying I'm banned from DECA in future... Parents!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I mean it's a bit late to say "This won't have any tangible effect and it is not worth spending more than about three seconds on it, please just enjoy the car" But I said it anyway. Does the pod actually get any airflow in that position behind a bumper like that?
    • Hey guys - apologies for digging this up. Has this website been shutdown or is the outage temporary?
    • So, went shopping at Just Jap for things that might work for the intake  After some trial fitting there I ended up with a 3" x 45° silicone bend, a 3" x 300mm alloy straight, and a humped joiner, some minor trimming will be required to shorten some of the stuff, but nothing that is beyond my "ham fisted" skills The guy at Just Jap was most helpful as we had all sorts of joiners,  bends and stuff out trial fitting  Laying it out above the stuff in there it seems everything will fit nicely, and looking at it, it is probably the way I should have been looking at doing it from the beginning, probably..... In the end it is a front bar off job anyway to remove the original stuff behind the front bar that is taking up the required realestate needed, so maybe a Thursday or Friday job And because I'm a hopeless consumer, I grabbed some new steel wheel nuts, the current ones are a spline drive type with a "security" socket, that somehow someone keeps misplacing, the new ones are a basic black steel 17mm hex socket In other news: I just did my "final" tax return, I am now officially a old retired veteran pensioner, and I'm milking the system for all it's worth,  life is good
    • I hadn't thought about the variable power steering assist. Presumably, it will always be the same level of assist as you get in an S14. The R32/3/4 are either helliishly heavy (at low speeds) if the solenoid is not powered at all, or hellishly too light (at high speed) if it is powered all the time. I presume that it is PWM controlled on those cars. I hadn't thought about the S cars not having variable assist. ugh. What crappy plebby cars they must be!  
    • Hmm yeah that is a good point. It looks like it'll just bolt in with no real issue besides maybe the bushings being different. My other concern was that 2 pin plug that I assume is used in some way to control the rack solenoid depending on the speed signal from the ecu. The DMAX rack doesn't even have that plug though so, don't think it'll matter. Might just order the rack and see how it goes. Will update this when I figure something out
×
×
  • Create New...