Jump to content
SAU Community

Recommended Posts

Was reading the other day in a Mercedes benz Van advertising magazine,

their is this guy in South Aus I think from memory who drives 700km's a day and has done over 1,000,000 km's in it. still going strong.

Couldn't believe it... Courier worker. crazy. discuss

I know taxi's do a shitload but lets leave those suckers out I reckon... trucks would do a fckload too

Edited by macdog
Link to comment
https://www.sau.com.au/forums/topic/346559-most-kms-a-car-has-travelled/
Share on other sites

I have a friend with a shorty GQ patrol - TD42 diesel, had ran the clock over, and was onto 10,000kms again.

i.e. 1,010,000 kms :thanks:

Not original engine, the first one died, but the new engine that's been there for 10+ years, did all those kms.

  • Like 1

I have a friend with a shorty GQ patrol - TD42 diesel, had ran the clock over, and was onto 10,000kms again.

i.e. 1,010,000 kms :thanks:

Not original engine, the first one died, but the new engine that's been there for 10+ years, did all those kms.

How do they drive the cars?

Do they trash them or are they ok? It's amazing what some cars can put up with.

Our builder has got an old Toyota Hilux, has had it for 10 years and hasn't changed the oil once!!!

Have an XF Falcon that I got from my brother. AFAIK, it's still original engine, has a bit over 447k on it. Probably lasted this long because my brother lived in quite remote places, but worked in Sydney (Qantas international pilot, so only drives to work once a week! every couple of weeks - 400k up the Hume).

Tow truck at work has 980,000km+ on it now, still drives well but has had a fortune spent on it over the years. Also seen a >TR MAGNA< ohmy.gif that comes into work for it's servicing/repairs etc with 600,000+ km on it now, old guy (70's) owns it and anything it needs, it gets. See quite a few falcondores in the 300-400k km bracket....

i know of a few people who have had cars with the clock on their second time around the clock.

i had a commodore that was an ex company car. was 12 months old (almost to the day) when i got it and had 80,000kms on it. my sister in law used to drive from gympie to noosa and back everyday for work (about a 130km round trip). she used to have a liberty but as the kms started racking up she started having problems with it so got a vx commodore. it has been pretty much hassle free other than a problem with the fuel pump.

if i had to choose between an import with 400,000kms on it or a commodore/falcon with the same, i'd probably take the aussie car.

my mazda had 470, on it, still going fine but was getting tired so i traded it before it died, few days later i get a letter from the EPA saying it was witnessed blowing smoke, good timing ey, could of fixed it with a new set of slugs,but the suspension was rooted and it didnt really feel very safe anymore...

theres a bunch of guys at my work up in the 6-700s and ive seen more than a few taxis over 800...but the one that took the cake for me was this bloke i was talking to oneday had an 80s model mack truck.

he had lost count of how many times its been around the clock, reckons it was at least 4 or 5..original engine..amazing..

i know of a few people who have had cars with the clock on their second time around the clock.

i had a commodore that was an ex company car. was 12 months old (almost to the day) when i got it and had 80,000kms on it. my sister in law used to drive from gympie to noosa and back everyday for work (about a 130km round trip). she used to have a liberty but as the kms started racking up she started having problems with it so got a vx commodore. it has been pretty much hassle free other than a problem with the fuel pump.

if i had to choose between an import with 400,000kms on it or a commodore/falcon with the same, i'd probably take the aussie car.

My first car i owned was a 2000 Model Subaru liberty RX 2.5, had 250,000 km's went like a dream... only thing i had to change was the brakes and that was it.

Great car, car had done mainly country KM's, maybe that had something to do with it.

2 patrols I had come to mind. one was the rb 30 powered carburetor variant. It did 400,000 kay in my posession and was still running around town some 5 years later being driven by a family of coconuts.

The other was the 2.8 litre turbo diesel variant that every body claimed was a pos. I traded it at 740,000 kays of hard abuse. That thing took everything I could throw at it and then some.

sum total of maintainence other than regular servicing was a clutch and worn brake pads.

i know this is not km's but we have straddles at work (big cranes on stilts ) that have done over 400,000 hours on the origonal merc diesl motor !

come on man, start a crane thread? hahahaha.. thats a fair few hours though

My first car i owned was a 2000 Model Subaru liberty RX 2.5, had 250,000 km's went like a dream... only thing i had to change was the brakes and that was it.

Great car, car had done mainly country KM's, maybe that had something to do with it.

i think most of the problems she was having with it was with the centre diff. apparently a lot of highway driving causes the diff to have issues. and at the price they are to replace, the mechanics were telling her to get rid of the car rather than fix it.

i think most of the problems she was having with it was with the centre diff. apparently a lot of highway driving causes the diff to have issues. and at the price they are to replace, the mechanics were telling her to get rid of the car rather than fix it.

maybe mine was different, i know the engine mounts were on there way out though... dealer bought it off me for a ridiculously low price..

My old R31 Silo had almost 400K on it when i sold it. That thing had a very hard life. I looked after it with oil andfilter changes every 5000kms, but it got an absolute flogging.

The weird thing is the old RB30 just seemed to get stronger and stronger.

Those things are scary bullet proof with regular oil changes etc.

My last Datto (180b) was on it's 5th trip around the odo, so in the high 400's.

But better than that, my mum had an '88 Pintara station wagon which had over 700,000ks on it when it got traded and all it had replaced in that time was the diff. The engine and box were still fine and that despite my best attempts to kill it. I learned to drive in that car and used to drive it when I was on my Ps. So it didn't have the easiest life.

My last Datto (180b) was on it's 5th trip around the odo, so in the high 400's.

But better than that, my mum had an '88 Pintara station wagon which had over 700,000ks on it when it got traded and all it had replaced in that time was the diff. The engine and box were still fine and that despite my best attempts to kill it. I learned to drive in that car and used to drive it when I was on my Ps. So it didn't have the easiest life.

its funny how long cars last, you get some good ones and some bad ones i guess.

I haven't had cars that have done way-out figures like the ones above...

but I must admit that I've been so concerned about several cars getting close to 200,000km, so I'd sell them.

That mentality I guess, is a carry-over from my parents saying pearls of wisdom like...

"There comes a time when repairs can cost more than maintenance" (with me thinking of buying their own Fiat 2300)

"Don't buy other people's problems" (whilst looking at a Monaro)

"If you can afford to run it, you can afford to buy it" (when I considered a Jag XJ-S)

"You'll kill yourself" (when I had my heart set on a used MG-B as my first car > got a new Datto 1600 instead)

:thanks: Mum and Dad

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Who did you have do the installation? I actually know someone who is VERY familiar with the AVS gear. The main point of contact though would be your installer.   Where are you based in NZ?
    • Look, realistically, those are some fairly chunky connectors and wires so it is a reasonably fair bet that that loom was involved in the redirection of the fuel pump and/or ECU/ignition power for the immobiliser. It's also fair to be that the new immobiliser is essentially the same thing as the old one, and so it probably needs the same stuff done to make it do what it has to do. Given that you are talking about a car that no-one else here is familiar with (I mean your exact car) and an alarm that I've never heard of before and so probably not many others are familiar with, and that some wire monkey has been messing with it out of our sight, it seems reasonable that the wire monkey should be fixing this.
    • Wheel alignment immediately. Not "when I get around to it". And further to what Duncan said - you cannot just put camber arms on and shorten them. You will introduce bump steer far in excess of what the car had with stock arms. You need adjustable tension arms and they need to be shortened also. The simplest approach is to shorten them the same % as the stock ones. This will not be correct or optimal, but it will be better than any other guess. The correct way to set the lengths of both arms is to use a properly built/set up bump steer gauge and trial and error the adjustments until you hit the camber you need and want and have minimum bump steer in the range of motion that the wheel is expected to travel. And what Duncan said about toe is also very true. And you cannot change the camber arm without also affecting toe. So when you have adjustable arms on the back of a Skyline, the car either needs to go to a talented wheel aligner (not your local tyre shop dropout), or you need to be able to do this stuff yourself at home. Guess which approach I have taken? I have built my own gear for camber, toe and bump steer measurement and I do all this on the flattest bit of concrete I have, with some shims under the tyres on one side to level the car.
    • Thought I would get some advice from others on this situation.    Relevant info: R33 GTS25t Link G4x ECU Walbro 255LPH w/ OEM FP Relay (No relay mod) Scenario: I accidentally messed up my old AVS S5 (rev.1) at the start of the year and the cars been immobilised. Also the siren BBU has completely failed; so I decided to upgrade it.  I got a newer AVS S5 (rev.2?) installed on Friday. The guy removed the old one and its immobilisers. Tried to start it; the car cranks but doesnt start.  The new one was installed and all the alarm functions seem to be working as they should; still wouldn't start Went to bed; got up on Friday morning and decided to have a look into the no start problem. Found the car completely dead.  Charged the battery; plugged it back in and found the brake lights were stuck on.  Unplugging the brake pedal switch the lights turn off. Plug it back in and theyre stuck on again. I tested the switch (continuity test and resistance); all looks good (0-1kohm).  On talking to AVS; found its because of the rubber stopper on the brake pedal; sure enough the middle of it is missing so have ordered a new one. One of those wear items; which was confusing what was going on However when I try unplugging the STOP Light fuses (under the dash and under the hood) the brake light still stays on. Should those fuses not cut the brake light circuit?  I then checked the ECU; FP Speed Error.  Testing the pump again; I can hear the relay clicking every time I switch it to ON. I unplugged the pump and put the multimeter across the plug. No continuity; im seeing 0.6V (ECU signal?) and when it switches the relay I think its like 20mA or 200mA). Not seeing 12.4V / 7-9A. As far as I know; the Fuel Pump was wired through one of the immobiliser relays on the old alarm.  He pulled some thick gauged harness out with the old alarm wiring; which looks to me like it was to bridge connections into the immobilisers? Before it got immobilised it was running just fine.  Im at a loss to why the FP is getting no voltage; I thought maybe the FP was faulty (even though I havent even done 50km on the new pump) but no voltage at the harness plug.  Questions: Could it be he didnt reconnect the fuel pump when testing it after the old alarm removal (before installing the new alarm)?  Is this a case of bridging to the brake lights instead of the fuel pump circuit? It's a bit beyond me as I dont do a lot with electrical; so have tried my best to diagnose what I think seems to make sense.  Seeking advice if theres for sure an issue with the alarm install to get him back here; or if I do infact, need an auto electrician to diagnose it. 
    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
×
×
  • Create New...