Jump to content
SAU Community

Recommended Posts

BIIIIIIIG circle on next year's calendar. This will be truly massive :D

We need a wasteland whore stand for the show n shine...and maybe some t-shirts reflecting our status as such...

This just in, it will be hilarious meeting people like boz and acting super nice/polite etc.

That is the point right there, SAU Vic as a majority have missed out on 3 very good national events of the same vein now. (that are only gettin better).

The motervation that SAU puts behind these sort of events could have made things bigger and better.

It just seems silly to my for another almost identical event, but ran by different people.

I'm pretty sure SAU:SA had a blast a couple of months ago in SA.

Don't get me wrong I will more than likely attend this event. There is probably no need to point this out, the event will almost certinly bring out different groups within the skyline universe, it just seems a waste that he SAU community could have gotten on board something of the exact same flavor 6 years ago.

SAU SA made the last nationals the fantastic event it was. They were amazing. Thats what happens when clubs work together. Never could understnad why SAU Vic never got behind the last three events, when they had the opportunity to be as involved in the event as the organising clubs. (NDSOC for the first one and CSA for the other two). It's disappointing for me, as a club president, to see the level of reply to this event, when the lst three have been highly publicised in here, and have been huge without the attendance of many SAU VIC members. If the Committee of SAU Vic had of got behind the other nationals events like they have with this one, it would have been even better and bigger.

CSA Would love to support SAU with this one too, and if there is anything we can do to help, just yell. Please also feel free to advertise it on the CSA Forum, and if you email [email protected] with info you would like on our website, we would be happy to put it in there as well.

OH I hope i am still here for this one. i missed the SA one, due to living here :( so i may have to stop studying for a while (currently at Cerberus lol) so that i aint on a boat for this one.

am definitaley keen to make this my last event for a while

Cheers Bengi

BIIIIIIIG circle on next year's calendar. This will be truly massive :D

We need a wasteland whore stand for the show n shine...and maybe some t-shirts reflecting our status as such...

This just in, it will be hilarious meeting people like boz and acting super nice/polite etc.

i lol'd

BIIIIIIIG circle on next year's calendar. This will be truly massive :D

We need a wasteland whore stand for the show n shine...and maybe some t-shirts reflecting our status as such...

This just in, it will be hilarious meeting people like boz and acting super nice/polite etc.

i'd go incognito and send my bbw off with a mate for teh lulz

BIIIIIIIG circle on next year's calendar. This will be truly massive :D

We need a wasteland whore stand for the show n shine...and maybe some t-shirts reflecting our status as such...

This just in, it will be hilarious meeting people like boz and acting super nice/polite etc.

lol when i first met kris. first thing i said was "hey ya kunt" haha

lets hope boz wont bring his bitches :P

Any idea's as to what month next year this will be held in next year? If its after March I may be able to take 2 weeks off work and drive or transport my car down. It would give a good reason to get CRD or Racepace to tune my car too.

Edited by GTRNUR
Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • I'm looking for some real world experiences/feed back from anyone who has personally ran a EFR7670 with a 1.05 exhaust housing or a .83 I'm leaning towards the .83 because its a street car used mostly for spirited driving in the canyons roads. I"m not looking for big numbers on paper. I want a responsive powerband that will be very linear to 8000 rpm. I dont mind if power remains somewhat flat but dont want power to drop off on top. The turbo I've purchased is a 1.05, although the mounting flange T3 vs T4 and internal vs external waste gates are different on both housings, I not concern about swapping parts or making fabrication mods to get what I want. Based on some of the research I've done with chat gpt, the 1.05 housing seems to be the way to go with slightly more lag and future proofing for more mods but recommends .83 for best response/street car setup. AI doesn't have the same emotions as real people driving a GTR so I think you guys will be able to give me better feed back 😀   
    • Surely somebody has one in VIC. Have you asked at any shops?  Is this the yearly inspection or did you get a canary?
    • This is where I share pain with you, @Duncan. The move to change so many cooling system pieces to plastic is a killer! Plastic end tanks and a few plastic hose flanges on my car's fail after so little time.  Curious about the need for a bigger rad, is that just for long sessions in the summer or because the car generally needs more cooling?
    • So, that is it! It is a pretty expensive process with the ATF costing 50-100 per 5 litres, and a mechanic will probably charge plenty because they don't want to do it. Still, considering how dirty my fluid was at 120,000klm I think it would be worth doing more like every 80,000 to keep the trans happy, they are very expensive to replace. The job is not that hard if you have the specialist tools so you can save a bit of money and do it yourself!
    • OK, onto filling. So I don't really have any pics, but will describe the process as best I can. The USDM workshop manual also covers it from TM-285 onwards. First, make sure the drain plug (17mm) is snug. Not too tight yet because it is coming off again. Note it does have a copper washer that you could replace or anneal (heat up with a blow torch) to seal nicely. Remove the fill plug, which has an inhex (I think it was 6mm but didn't check). Then, screw in the fill fitting, making sure it has a suitable o-ring (mine came without but I think it is meant to be supplied). It is important that you only screw it in hand tight. I didn't get a good pic of it, but the fill plug leads to a tube about 70mm long inside the transmission. This sets the factory level for fluid in the trans (above the join line for the pan!) and will take about 3l to fill. You then need to connect your fluid pump to the fitting via a hose, and pump in whatever amount of fluid you removed (maybe 3 litres, in my case 7 litres). If you put in more than 3l, it will spill out when you remove the fitting, so do quickly and with a drain pan underneath. Once you have pumped in the required amount of clean ATF, you start the engine and run it for 3 minutes to let the fluid circulate. Don't run it longer and if possible check the fluid temp is under 40oC (Ecutek shows Auto Trans Fluid temp now, or you could use an infrared temp gun on the bottom of the pan). The manual stresses the bit about fluid temperature because it expands when hot an might result in an underfil. So from here, the factory manual says to do the "spill and fill" again, and I did. That is, put an oil pan under the drain plug and undo it with a 17mm spanner, then watch your expensive fluid fall back out again, you should get about 3 litres.  Then, put the drain plug back in, pump 3 litres back in through the fill plug with the fitting and pump, disconnect the fill fitting and replace the fill plug, start the car and run for another 3 minutes (making sure the temp is still under 40oC). The manual then asks for a 3rd "spill and fill" just like above. I also did that and so had put 13l in by now.  This time they want you to keep the engine running and run the transmission through R and D (I hope the wheels are still off the ground!) for a while, and allow the trans temp to get to 40oC, then engine off. Finally, back under the car and undo the fill plug to let the overfill drain out; it will stop running when fluid is at the top of the levelling tube. According to the factory, that is job done! Post that, I reconnected the fill fitting and pumped in an extra 0.5l. AMS says 1.5l overfill is safe, but I started with less to see how it goes, I will add another 1.0 litres later if I'm still not happy with the hot shifts.
×
×
  • Create New...