Jump to content
SAU Community

Recommended Posts

you mean 250rwkw @ approx 13psi while the turbo is still half asleep, should see at least 300rwkw on 20+psi - I hope..

Great result so far, looking very interesting. My SS1 made 244rwkw on 98 fuel and 279rwkw on Caltex Eflex so everyone can get a rough idea that it would be around 250rwkw on 98 fuel in its current setup. Keen to see what it does with everything sorted!

DVS JEZ how is the ebay manifold holding up? and what turbo is it running?

Im keen to get one of these turbo's but don't want to spend the money on a 6Boost manifold for a budget turbo...

$250 mani +750 turbo + 400 gate + 600 for intake and dump ect = $2K for 300kw, seems awesome to me.

DVS JEZ how is the ebay manifold holding up? and what turbo is it running?

Im keen to get one of these turbo's but don't want to spend the money on a 6Boost manifold for a budget turbo...

$250 mani +750 turbo + 400 gate + 600 for intake and dump ect = $2K for 300kw, seems awesome to me.

+500 for coilpacks

+700 for injectors

+500 for FMIC

+2000 for ecu and tune

+1000 for a clutch

+1000 for micselaneous bitsand pieces and fixing other little problems that may arise..

And lets hope your not paying for any labour...

2k for 300kw...yeah right...lol

are you still having troubles with the turbotech jez as i have one sitting in my shed and im on a bit of a tight budget also. and dont really want to fork out for a ebc if a turbotech is going to do the job

Someone on here made 330-340rwkw with a t67-25g (on 98) im pretty sure. So the td06sl2-20g should crack 300 with enough boost, And with much better response.

Will echo some earlier comments on this thread. I am very keen to see any engine that produces over 300rwkws on PULP98. Be it an SR20, EVO or RB25/26 or RB25/30. I think you will find that they often make 270-280. Occassionally 280-290rwkws....but I have never seen 300rwkws out of one .

So not sure why people say "should" regardign 20G compressors cracking 300.

Anyway, if current discussions pan out than I am going to billet compressor wheel on my 20G. So will be interesting to see if it loses power, makes power, loses response/makes response

Would you also be able to plot the boost curve? I am curious to see the difference between a 20 and 25. Especially since your VCT is off. Just means the extra compression and 500cc is working for you :cheers:

I think I'm expecting more also. There are plenty of results on Evo's to compare outright power against, I dont think outright power changes that much across engine types provided the motor can flow.

+500 for coilpacks

+700 for injectors

+500 for FMIC

+2000 for ecu and tune

+1000 for a clutch

+1000 for micselaneous bitsand pieces and fixing other little problems that may arise..

And lets hope your not paying for any labour...

2k for 300kw...yeah right...lol

Was talking about turbo upgrade and not the other stuff. Hypergear turbo's can get 300kw for $1550 but that's internal gate on standard manifold and you still need to make a intake. GT3076 again is either internal and might not make the power for more money.

Will echo some earlier comments on this thread. I am very keen to see any engine that produces over 300rwkws on PULP98. Be it an SR20, EVO or RB25/26 or RB25/30. I think you will find that they often make 270-280. Occassionally 280-290rwkws....but I have never seen 300rwkws out of one .

my mates GTR made 337kw in rear wheel drive mode on 98.

luv psi the controller should be fine i think its more of a gate issue. i think it made my turbo laggy because i only had the 7 pound spring so the controller was holding back 11 psi its to much. try and get your gate as close as possible to boost pressure then use the controller to fine tune. how did you go with the manifold

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • You're going to miss not worrying about rust in the strut towers like the Skyline shitboxes out there
    • A few little updates that weren't filmed due to not taking long to do or not interesting enough for their own video. My new K&N Air Filter arrived, I went with an RU-4180 which matched the dimensions of the universal cone filter the car originally had.  The battery had gone flat, while that was charging I tidied up the spaghetti wiring at the bulk head and down the sides of the engine Next job was to swap the stereo The Kenwood harness had the female ISO plugs cut off and the male ISO plugs cut off the adaptor loom and joined with bullet connectors. I ordered in a repair loom through work and re-did it all. New Kenwood unit installed (Android Auto, DAB, Bluetooth, Reverse Camera) The bonnet/hood gas struts have been poor since collecting the car. I couldn't find any suitable replacements locally so took a chance on a pair from AliExpress.  The originals don't use a retaining clip to secure the cup onto the ball fixture, would explain why I struggled for 10-15mins trying to pry off the cups. The ball fixtures unscrew using a 12mm spanner, new ones are the same size. Sadly no photo of them fitted, you're not missing much lol The dished Momo steering wheel got replaced with my Momo Tuner, turns out I ordered counter sunk bolts for the horn trim ring (like they normally are for the steering wheel) instead of allen cap (flat seat)  A terrible photo of a Quaife style gear shift knob I've had stashed in my tool box for many years after purchasing the incorrect thread size (I can see a pattern emerging with ordering incorrect parts...) Also threw in a cup holder and a (empty) Boss Coffee can, because why not  
    • GT-R clearly the better choice! The 300 is certainly not insaly fast but has a decent amount of poke. Does a nice little drift around the corners with a decent amount of throttle. It's VERY predictable in a slide too.  Feels so progressive! People probably presume there's a 25 year old driving it based on my behaviour this week! 🤣
    • Yeah Jap import. Fairlady Z then! I'm a bit the same.  They've been on my radar for a fair while but then just impulsively decided to buy one!  Was going to just buy an NA and add turbos to it later but decided to save the f'ing around and just buy the turbo version. 
    • Thanks mate, well done to you too! Yeah not looking forward to doing any major work to it!
×
×
  • Create New...