Jump to content
SAU Community

Recommended Posts

Yeah it doesnt look like its on. The curve is what id expect from WG pressure alone, which shows it is a really epic result :D

Sucks you have to do it twice but hey.. Im onto my 3rd attempt lol

You need to love cars to really hate them :yes:

very good results on only 15psi ARTZ sorry to hear about your clutch.

beats my poor results lol

and leave the screamer, stop being a girl :nyaanyaa:

Well the internal gate 20g sucked balls last night. Well it did perform well except it was running 21psi minimum. This on 98 octane, We got it up to around 280kw.

We tried everything to back the boost down, even had the wastegate flap off and was lazy onto boost but then ran 21psi after 5000.

Ill post sheet up later

not bad, my mate is going to run one on his SR.

was this a 8 or 10cm ?

lol dori was stuck on a bar because of control issues, its been sorted now and were waiting to see the final results.

your stuck on a bar coz your clutch.... was like a bar of soap!

happy trolololo !

its going in today,

results soon.

hopefully my clutch holds up too!

its being tuned with gate plumped up,

then BSA is gonna put a removable flange so i run it atmo.

then put it back on the dyno to see the power differences.

You will make 289rwkw peak power on 22psi/ 98 fuel. Prediction. And awesome bottom and mid range..:rolleyes: Hurry up with the tune already.

^ thats awesome mate thanks for sharing, helps me decide if i want one on my SR :)

Can you divulge the specs of that motor? Is it heavily moded or internally stock etc? headwork and cams? Thanks,

Also great to hear your getting back on the dyno today dori! cant wait

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Just wanted to pop in an update on my setup. The CD swap has been great, I love the mazworks housing for the overall simplicity. I ended up sealing my trans tunnel with a thin sheet of aluminum reused some of the holes on the trans tunnel, and laid some window sealing EPS foam around the edges. Works great, really quieted things down and sealed up the car.  As for the power comment. Right now I am also running about 650whp. with the way the bell housing is attached to the face of the transmission I have zero doubts it would be fine, mainly because the input shaft and main shaft bearings are seated into the bell housing adapter. This means the load is NOT on the bolts to maintain the power, rather into he casing of the bell housing; Yes the bolts are doing some work there, but with both shafts locked in zero worries.  End of the day, the Mazworks solution is the easiest and safest. no need to take your trans to a shop to get milled perfectly, it fits with minimal clearancing, and you can use all your existing clutch and flywheel.  Driving wise the CD has been great compared to the big box, I'll probably swap my final drive at some point. The serial 9 shifter is gooooood, my only qualm is how tight it is, it takes a fair bit to get use to, 5th and 6th are a bit eh/hard to find at times, but maybe I need re-adjusting, and I think my clutch master is very tired and needs a rebuild. 
    • If you are keen, have a look at my build thread. Car is for sale for the right money or straight swap for a F80 M3 LCI.
    • Welcome mate.  No point in over thinking it, buying any one of those cars you mentioned is not a smart or logical choice with the availability of many "better" (re price to performance) cars available to you.  The heart wants what the heart wants, buy whatever it leads you too.
    • Hey everyone! Im so grateful to be apart of this community and ill do my best to be apart of this. Firstly, i'm not disclosing my real name due to in real life circumstances surrounding my privacy and public image (sorry lol) Secondly, The only thing personal I am willing to share is that I'm from Sydney and a descendant of one of Sydneys largest mortgage firms. I got gifted my first ever car, a 2022 Porsche Cayenne and I love it to death. Ive been driving it for about 5 or 6 months now and honestly Im so grateful for my parents for gifting me this vehicle. However recently I've been working my ass off to afford my second car (which I need help deciding soooooo community help me out please?). Once decided, im planning to try modify it myself. Recent I've been thinking about getting a Skyline, particularly a 25GT or GT-V, yes I know overrated as hell, but I'm also considering a Chaser which I recently came to love. However my dream is to one day own a 180SX (So hard to find clean versions and im not really into importing).  Lastly before I send this off, I want to apologize if I sound tacky or pretentious. I try not to and want to genuinely learn from everyone and anyone. (Im no expert in this area) Thanks for reading!
    • I've got three stashed away but it's starting to get silly with the prices 
×
×
  • Create New...