Jump to content
SAU Community

Recommended Posts

Hey guys, got a bit of an "oddball" setup going on, am doing a remote mount turbo. Engine is a VG30DE 10.5:1 comp, and am looking at a TD06-20G as the turbo. Will be running Water/methanol with no IC, but will only be running 7psi for the first week or two. Would a TD06-20G be too big? maybe choose a smaller exhaust housing then usual?

gday guys, thought id post my results from using one of these turbos

i have a tdo06 20g sl2 8cm rear on my rb20

turbosmart 40mm wastegate

550cc denso injectors

bosch 040 fuel pump

z32 afm

splitfire coilpacks

ebay spec front mount

3inch exhaust

Nisstune

still needs a little tweeking like a new CAS, decent front mount and cam gears are on there way.

post-80927-0-85810000-1331632426_thumb.jpg

cheers - trent

Hey guys, got a bit of an "oddball" setup going on, am doing a remote mount turbo. Engine is a VG30DE 10.5:1 comp, and am looking at a TD06-20G as the turbo. Will be running Water/methanol with no IC, but will only be running 7psi for the first week or two. Would a TD06-20G be too big? maybe choose a smaller exhaust housing then usual?

Hey mate, I dont think it would be too big. Possibly the smallest id run to be honest.

Yet I dont have any first hand experience with a remote mount, maybe it needs something different.

GL

gday guys, thought id post my results from using one of these turbos

i have a tdo06 20g sl2 8cm rear on my rb20

turbosmart 40mm wastegate

550cc denso injectors

bosch 040 fuel pump

z32 afm

splitfire coilpacks

ebay spec front mount

3inch exhaust

Nisstune

still needs a little tweeking like a new CAS, decent front mount and cam gears are on there way.

post-80927-0-85810000-1331632426_thumb.jpg

cheers - trent

Wow plots so much different to mine, absolutely nothing happens till 4k then bang, it gains 120kw by 5k..must be fun :D

did you find out if that ring was missing in the gate??

yeah she up and boogies after 4k lol

im looking at jumping on the e85 bandwagon ;)

nuh it wasnt missing all good, is your dyno sheet in this thread mate?

edit; found it, very impressive mate :)

Edited by TJR32GTS-T

+1 more specs on the SR above please, and

JEZ: specs on the motor you recently tuned with the 20g internal gate please.

Its a stock rb25 Running stock manifold. Td06 20g 8cm 21psi on 98 octane pretty aggressive tune.

No vtc yet.

Has since made up a 5 bolt rear housing and boost pressure is safe and stable at 14psi. Should help with flow too.

Retune on 18psi once he gets car rego'd

This is a great turbo to stop getting defected coz it looks like a stock RB25DET turbo with all the japanese on it. Im also loving the fact that you can get about 300kw stock using this babe. Thumps up fellas for finding this masterpiece

Hey guys, got a bit of an "oddball" setup going on, am doing a remote mount turbo. Engine is a VG30DE 10.5:1 comp, and am looking at a TD06-20G as the turbo. Will be running Water/methanol with no IC, but will only be running 7psi for the first week or two. Would a TD06-20G be too big? maybe choose a smaller exhaust housing then usual?

8cm will be perfect for you, but if you're only running 7psi, you probably won't get much power and may be laggy.

what is your goal - response or outright power?

Its a stock rb25 Running stock manifold. Td06 20g 8cm 21psi on 98 octane pretty aggressive tune.

No vtc yet.

Has since made up a 5 bolt rear housing and boost pressure is safe and stable at 14psi. Should help with flow too.

Retune on 18psi once he gets car rego'd

nice, i reckon it will be perfect streeter with response and 250-260~ rwkw and can match the similar turbo from hypergear.

i am here. :nyaanyaa:

should be getting the car back tomorrow so fingers crossed for no issues & good results...

8cm will be perfect for you, but if you're only running 7psi, you probably won't get much power and may be laggy.

what is your goal - response or outright power?

nice, i reckon it will be perfect streeter with response and 250-260~ rwkw and can match the similar turbo from hypergear.

i am here. :nyaanyaa:

should be getting the car back tomorrow so fingers crossed for no issues & good results...

Will be pushing it up to 15-17psi and yeah outright power is the goal.

go the 10cm.

the na compression will help spool it up

The below picture isnt a perfect example as the spreadsheet is the combination of my car on two different dynos and two different tuners. The dynos read about the same, if anything the dyno that produced the 8cm result read a little lower then the 10cm dyno. The tuner that did the 10cm tune was not as good a tuner as my current tuner. So that obscures the result.

But even so, I think it paints the correct picture as to what happens when you throw too big an exhaust housing on a car. Unless your car is choking on its exhaust gases, going to a larger A/R housing is a pretty risky way of trying to get more power. Especially with a turo mounted well away from the head. The exhaust gas would not have the same amount of energy after its gone through piping and cat/mufflers etc

TD06_Plot.jpg

If you want more power look to try and get your inlet temps as low as possible, back pressure from exhaust as low as possible, pressure drop in inlet as low as possible etc. Then have a look at your

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...