Jump to content
SAU Community

Recommended Posts

Very very nice result - getting VCT working might actually help with the surge too.

That's what I was thinking..

My understanding of compressor surge is that the turbo is pushing more air than the engine can actually ingest at that point in time..

So getting VCT working, which will increase the engines breathability in the low-mid rpm range may be enough to get rid of the surge.

on the same note opening up the WG pipe might expel extra has yeah..its a 44mm gate isn't it dori

into what size pipe

here's a nice one of the manifold/wastegate pipe glowing

262bgw1.jpg

but i put up proper pics a few pages back, go back & look for it, would've been around Jan-Feb sometime.

ahhh..i see the problem,,somebody left a penis in your engine bay man

I will let u know this week methz. Ill tune my drifter. Only do a run or two on 25psi then back down to 20psi

sounds good mate, be interesting to see the result

Id love to find a turbo that is all in by 4k and revs to 7500 hard

gt3582 is nothing nothing then all in at 5 and im not really into it much anymore.

3rd wheel spin at 120 is fun though haha.

let us know how u go!

on the same note opening up the WG pipe might expel extra has yeah..its a 44mm gate isn't it dori

into what size pipe

ahhh..i see the problem,,somebody left a penis in your engine bay man

:laugh:

I was looking at going the way dori34 has and while the sceptisim I came across scared me away, I'm impressed! What are the thoughts on the limits that sort of setup would have?

dori34, how much clearance have you got to the tower and engine mount?

So. Hopping to have my setup tuned within next 3 weeks

25 neo

Stg 2 tomei pon cams

880 cc Denso on gen Greddy rail

Gen Greddy manifold

Sard fuel reg

Spitfires

Nz hi mount if ever turns up

44mm tial gate

3.5 straight through

Greddy cooler core 90mm cold 2.5" hot

T67 25g 10cm

Will post results ounce tuned

mine only seems to serge if you load it up in too high of a gear for the rpm ( say WOT from 2.5k in 3rd or 4th gear) . It also did it whilst tuning down low as the runs are done in 4th. Never surges on the road boosting through the gears (should say spinning through the gears lol), unless you do it on purpose. So just a touch up tune with vct enabled will probably eliminate the problem. Anti surge sound tough tho. I love this turbo set up, best fun iv had in a car, comes on bloody hard. Very nice results for 98

wtf our bays look almost identical dori, down to the way ive cut the standard heatsheilds, the matt black charge pipe and intake. only exception is for your gate pipe angle and coil pack colour. fwark even my user name is the same as urs.

wtf our bays look almost identical dori, down to the way ive cut the standard heatsheilds, the matt black charge pipe and intake. only exception is for your gate pipe angle and coil pack colour. fwark even my user name is the same as urs.

how many of you lost significant power over 20rwkw by going plumb back like dori34? Anyone else running screamer?

who you baracking for now hypergears going Kando Rondo?..lol

cheers

darren

Actually , I'd like to see a td06 bolted on the hypergear test car , just for a comparo between the two . I'm pretty much subscribed to the two threads in here waiting to see an outcome and weather stao actually can improve the td06 in any way

:laugh:

I was looking at going the way dori34 has and while the sceptisim I came across scared me away, I'm impressed! What are the thoughts on the limits that sort of setup would have?

dori34, how much clearance have you got to the tower and engine mount?

There is heaps of room if your interested send me a pm

how many of you lost significant power over 20rwkw by going plumb back like dori34? Anyone else running screamer?

My latest run, I doubt there is much power lost with my external plumbed back in, the GTX must be well out of puff by now.

It would depend entirely on the exhausts ability flow at the end of the day.

post-63525-0-07946100-1332844283_thumb.jpg

who you baracking for now hypergears going Kando Rondo?..lol

cheers

darren

Kando for me dude, and Scotty, you have such a nice meaty curve on your graph - lots of power - thats the GTX3071 on E85 right?

Kando for me dude, and Scotty, you have such a nice meaty curve on your graph - lots of power - thats the GTX3071 on E85 right?

Yeh mate, just the baby GTX on the stock crossover manifold and Eflex. Not bad for an unopened VQ don't you think? :whistling:

I just wish I had the coin to slot a VQ25det in a light car, rx7 or 1600 perhaps? One day...

Here is the boost graph from above.

post-63525-0-78911000-1332847387_thumb.jpg

200kph was just over 6k I think in 4th gear, 6500 perhaps? Dyno wont go over that speed. Can you work it out from there?

The boost ramps slower now as I re-routed the wastegate hoses, boost was spiking with boost pressure to the top of the gate though. It still makes full boost by around 4k with the 1.06 Tial rear.

I probably should have posted in Micks GTX3071 thread but I was answering the wastegate plumb back question.

Maybe the Chinese will now introduce a Kando copy - 'Can-do Turbos'. Made in China and me can do!

He's importing parts out of Taiwan then assemble and balance them here of some sort. now with billet wheel and probably ceramic roller bearing soon. lol. be pretty keen to see what he can do in modifing them into a stockie bolton.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yeah, but the country is turning to a bit of shite at the moment... (Majority of work is NZ'ers, and we have an office in NZ I deal with daily...)
    • If it came off a Skyline you could easily have sold it for $500 to someone wanting OEM parts to return their car to stock. Not sure if that market is in the Stageas or not.
    • It sounds "expensive" when compared to a mass produced tow bar that gets imported from China, but if that's all custom fabrication, then I think where you've ended up, it's a pretty good price! Considering some people will pay thousands of dollars for a few intercooler pipes to be welded up!
    • I think modifying any car, has to be because you like it, OR, you have an end goal to do XYZ. EG, build the fastest VW Golf in the country etc. So, if you're not setting out to do crazy things like break a specific record, or replicate some certain car, then as mentioned above, find the car that you really like, and modify it. Why? Well, modifying any car isn't a sound logical thing to do it. You do it for the fun of it. And if you want it to be fun, you need to start with something you really like. For some, that would be something like an R34 because they saw one in The Fast and The Furious franchise, for others it'll be something entirely different for some other reason. For me personally, why am I here, nearly 20 years later? I loved cars, all cars, and I wanted a car that drove a certain way, I was about to drop the coin on modifying a VR Commodore (Because I grew up in a family that taught me Commodores were the only cars worth owning). And just before I did that, a friend handed me the keys to an R33 GTST he'd just bought that was pretty much bone stock, it drove EXACTLY how I wanted a car to. Nice handling, the right amount of straight line zoom zooms, and hell, I loved the way it looked. I looked at the R32, it wasn't for me, I looked at the R34, it wasn't quite for me either, mainly because they were too expensive  Price is also why I never bought a GTR back in the day. But I loved the curves of the R33 GTST, interior suited me over the R32, and wambam, thank you ma'am! I bought one. And in the essence of "return on investment" and "Sound financial planning", I've been making the dumbest mistakes ever since. Also, I know of a specific mortgage broker on these forums who has a very well modified R33 GTST making great power for the street and track... Then you could modify it with adding a Samsonas gearbox, Bosch motorsport ABS system, and go have some sick fun! Oh, and then you'll be able to help him get me my next mortgage, because that, like modifying a car, is probably a stupid financial decision for me at this moment the property I want...
    • It cost me $2900 all up for a local trailer / towbar place to supply and install. I did think it was a bit steep initially but after all the work involved and seeing the final result I think its well justified.  Hardest part was finding someone willing to customize and fit it up with trial and error basically. Whereabouts are you located? - I had my work done locally in Wangara.
×
×
  • Create New...