Jump to content
SAU Community

Recommended Posts

seeme to be no point getting antisurge with these turbos mate..

Mine and Jez... td06 with no antisurge >>..300kws..compressors maxed out

Simons and Battery.. t67 no antisurge >> 350kws ++++

dori changed to antisurge and lost 30kw..

.Moral of the story is ....Dont get antisurge :P

Just gone to buy a T67 10cm and there is none listed :( only the anti surge, which doesn't seem as good! Doh!

You can buy all the pieces separate so you should be able to work something out if you message him (if he replies lol). Also noticed that now the kits come with a braided drain.

seeme to be no point getting antisurge with these turbos mate..

Mine and Jez... td06 with no antisurge >>..300kws..compressors maxed out

Simons and Battery.. t67 no antisurge >> 350kws ++++

dori changed to antisurge and lost 30kw..

.Moral of the story is ....Dont get antisurge :P

Probably shoudl qualify that and say it was on E85 which is cheating.

I am yet to see enough results to think you can get 300rwkws out of a 20g on 98. 280rwkws is about what I think you can get out of a 20G. Can bag an extra 30rwkws with E85.

These days you almost need to talk about fuel before the boost level required

I didnt know there were any rules Roy ;)

LOL, of course there are no rules. But since E85 gives a bit of free power, until E85 is as common as 98 vs 95 its probably not a bad idea to just qualify the power results as people reading this will start to get stars in their eyes with regards to power they can make. LOL, sure as sh1t not many people will be able to bag 306rwkws out of a std RB20 running a 20G...difference being no RB20 punters bother running E85

yeah fair point... all 4 cars are running ethanol in some form so its fair to say its fairly common place these days. I will keep it in mind next time though..

But really, what do you care if people get stars in there eyes..I mean its all here to read and learn and we are hardly accountable for them not doing their homework are we??

I have read the 200 hundred pages of this thread alone more than once....not to mention the other 4 million threads I have read here for tips and advice...If some punk wants to walk in and read the last 5 pages of this thread, get stars in his eyes, then ask a few stupid questions and think they can mimic what I,you and others here have built, well I wish them the best of luck...

No doubt...but sometimes people see a number, spend the money and cant match the result and end up disappointed after spending thousands. Maybe I am wrong, but quoting E85 figures without specifying E85 can lead to disappointed people. I know I was disappointed when I couldnt match others results with 6boost manifolds, Plazmaman inlets and to an extent E85 results. I didnt really make any more power with E85 running the same boost pressure. What it did allow is me to run more boost and make more power when 98 stopped making grunt at 19-20psi. But much of that is probably associated with being a 20

So this thread is full of good results, but after years of people confusing 20G with 25Gs, T67s with T66 turbos etc...its good we now have a good database of power the Mistu turbos can make...so helps to keep the occasional qualifications on results ( IMO :) )

yes it is a great database thats also full of me talking alot of vaguely related rubbish :blush:

that reminds me, I didn't get a figure for pulp @ 17.5 psi on mine so I am not actually certain how much a difference E85 has made as my compressor seems maxed out either way.. ..With my previous result of 267 @ 15psi it could be fair to say that 290 @ 17.5psi could of been a possibility, so maybe I haven't really gained alot using E85..I do however believe it to be a better/cooler running, safer, fuel all round.. So any added power is a bonus really and I would happily run it even if it didnt make extra power..

Trent if you're reading and have those pulp figures could you throw em up for us..though I have a feeling we didnt do it.. :unsure:

I know I don't have a kando, but on the topic of E85 advantage above, mine ran 311rwkw on 98 at low boost and on the same boost level it ran 340rwkw on E70 (pump e-flex) :) so it sure helps

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...