Jump to content
SAU Community

Recommended Posts

Bought a set of Speedbleeders; https://www.speedbleeder.com/

SB 1010 x 4 to go in with my new calipers. Also got a set for my GSXR 1000. 7 Bleeders + postage: $56. Had these on my old CBR 929 RR, makes bleeding a breeze

ALL_BLEEDERS.jpg

Edited by Daleo

They are an awsome idea how do you figure out which one suits your calipers?

i ordered the nissan ones, the are like 10mm and 1mm pitch i think

i just hoped that they would fit and they did

SB 1010 is right i think

They are an awsome idea how do you figure out which one suits your calipers?

i ordered the nissan ones, the are like 10mm and 1mm pitch i think

i just hoped that they would fit and they did

SB 1010 is right i think

Bingo :thumbsup: There are also short & long versions. And Stainless (twice the price tho').

Fitted my Group Buy Swaybarsbanana.gif

Best Mod Ever.

My son of rajab, it's fun to drive now!

Fellas, you WILL NOT be disappointed. Bars are perfect, one clamp was a little tight, but a tap with a hammer sorted it out.

All up, less than an hours work, what a difference.

is that a good thing? sometimes the core isnt supposed to be pressurised with oil, hence the restrictor and large oil drain

yeh it isnt meant to be, but the restrictor i 1mm thick, and even the bb highflow didnt sound like it was getting enough..n eeing as im converting to bush core, it needs more, we only opened it up a ml

ahh ok cool! just making sure oil starvation/too much oil wasnt the problem of the other turbo.

dale, swaybars are awesome hey :)

combined with the BCs they are great on the road

Replaced some worn/stripped/broken wheel studs on the Stagea today ... along with getting some new wheel nuts too. Pretty easy job really.

Also pulled some bits off under the bonnet. Getting some small issues resovled and bling for the engine bay. :P But the guy hasn't finished the parts yet, so the Stag is still in pieces. :(

While its out of action, removed the HKS 2530 turbo to replace some gaskets ... and found a leak in the dump pipe :( Need to get it welded back up before fitting.

post-48775-0-10728400-1296278082_thumb.jpg

Thinking while the turbo is out, that I'll just sell it and upgrade.

post-48775-0-47638500-1296278183_thumb.jpg post-48775-0-63555700-1296278233_thumb.jpg post-48775-0-55117100-1296278272_thumb.jpg

tried to go to wet and wild today

went to take off and if i accelerated too much the whole car died instantly

drive soft and it was fine, too much throttle at low revs and it died (ecu powered off, ecutalk display shut off)

key off and back on and it was fine again

so i pulled out the fuel pump to look for a clogged filter but it wasn't too bad

put it back together and it was better, 3rd gear full throttle was fine but 2nd shat itself once on my test drive but was fine apart from that one incident

at idle the fuel pump was getting ~7.7V (is this low?)

i'm thinking that the fuel pump is on its way out, or the voltage dropping system

thoughts?

(afm voltage was normal, ~1.2v @ idle)

check the ground wire for the fuel pump. might need cleaning

im not sure if they use a dual speed pump, if not then anything under 12v is probably not good mate

we still have dual speed i think

will do, i took the whole thing out and it had a funky setup (float on one thing and fuel pump inside a box of the floor of the tank, fuel return ran back inside the box)

will check the ground tho, thanks for the idea

dale, swaybars are awesome hey :)

combined with the BCs they are great on the road

Hell yeah! I'm just on the middle setting of both bars and the difference is incredible! The back feels spot on, I might go to the hardest setting on the front and see what that's like.:banana: I think I'm also going to soften my dampers a little to accomodate the extra roll stiffness.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
×
×
  • Create New...