What Have You Done To Your Stagea Lately?

[Run-It-Hard]

I've ordered/bought all sorts of shit for my Stagea over the past week (mind you, I've owned it for 8 days).

Just picked up some DRiFT "Blade" seats (GTR replicas) yesterday for $400 a pair, BARGIN!

[darrinspencer]

I've ordered/bought all sorts of shit for my Stagea over the past week (mind you, I've owned it for 8 days).

Just picked up some DRiFT "Blade" seats (GTR replicas) yesterday for $400 a pair, BARGIN!

Not too bad thoses seats for the money. I just sold a brand new pair for $360 about 3 weeks ago.

Do you need a FMIC? I will have brand new ones for R33/r34 C34. tube and fin for $300 full kit in approx 6 weeks.

[ironpaw]

$114. No, I know the one you're talking about, that one was VERY nice, but I would have to paint anyway, so a couple of little marks didn't worry me. I've just got to fit some mesh in the opening.

Ended up using IM, as I spoke to Jesse last week; whilst his commission is less, his container cost was higher, and the end price was noticeably more on an identical part. I would definitely use him on Air Freight though, great to deal with.

Cheers, Dale

Was it the white one that looks twisted in the pics?

[Run-It-Hard]

Not too bad thoses seats for the money. I just sold a brand new pair for $360 about 3 weeks ago.

Do you need a FMIC? I will have brand new ones for R33/r34 C34. tube and fin for $300 full kit in approx 6 weeks.

Yeah they aren't bad at all. Better then Spending 2k on the same seat ... that money can go elsewhere

I do need one, won't be putting one on for a while though I think ... do you have to cut under the battery with your kits? I was going to run the stealth shit that justcrap sell so the engine bay looks factory.

[Daleo]

Was it the white one that looks twisted in the pics?

No, that one's listed for $334. And it's a pile of shit.

It's this one; Pearl white, a few marks, but no big deal.

I'm going to cut out the centre bar anyway and put some expanded mesh in, so there was no point buying a mint one to chop up.

Just got to go to Nissan & get the bad news on the driving light blanking plates...

Edited March 14, 2011 by Daleo

[darrinspencer]

yeah, will have to cut under battery. These are the cross over type, not return type.

Have 10 full sets coming.

Plan to order some return style, when I find a manufacture, May have to send them a sample to copy.

Have some 3 sets of Bride copies coming as well

Might have to "test" a pair in my car

[Run-It-Hard]

Cool cool, well I'm in no rush for power mods yet until the manual is in, which would be sometime later this year.

[Daleo]

yeah, will have to cut under battery. These are the cross over type, not return type.

Have 10 full sets coming.

Plan to order some return style, when I find a manufacture, May have to send them a sample to copy.

Did the M35 version get off the ground Darrin?

[darrinspencer]

Did the M35 version get off the ground Darrin?

Not yet. I was trying to get the manufacture to buy a M35 kit to copy, until they realised what they cost

They want me to send over a sample (pipe only) which would cost me $1000 to do, which depeneding on the number of m35 sales, I would need to recover some of the $1000 outlay. I will probaly still do it, but i will would be min 3-4 months before they would be done.

Edited March 14, 2011 by darrinspencer

[Daleo]

Not yet. I was trying to get the manufacture to buy a M35 kit to copy, until they realised what they cost

They want me to send over a sample (pipe only) which would cost me $1000 to do, which depeneding on the number of m35 sales, I would need to recover some of the $1000 outlay. I will probaly still do it, but i will would be min 3-4 months before they would be done.

No worries, thanks.

[ironpaw]

won a set of 350z Brembos this morning from fleabay. $1k delivered from the UK, front and back calipers only...

after driving around in my newly tuned car I think the factory ones definaetely needs upgrading...

[Big Fella]

I made a stainless set I sold for $250, back to the flange so he could remove and refit for track days etc. They came up great, not my thing (I like stealth) but the look is perfect. 3 inch pipes are the go, you just need to work out the merge.

these are the ones that i wanted to get, but i couldn't justify the cost. they look good tho

am performance blast pipes

[Run-It-Hard]

That isn't a bad price for a set of blast pipes, the set I am looking at would be close to $400 landed from the states!

[Big Fella]

That isn't a bad price for a set of blast pipes, the set I am looking at would be close to $400 landed from the states!

these are locally made, and he can fit them for an extra $150, probably a bit far for ya to come to get an exhaust fitted.

whichever way you go, get them flanged so the can be removed. i still have my big fujitsubo muffler for my car when i do interstate trips.

[Run-It-Hard]

Cool, shame I can't see what they look like, damn work computer!

[Daleo]

nice!

i have the aero rear bar left if you want it mate. dont have the side skirts tho

Iain, PM me with a price if you like.

[Sunkist]

got my kakimoto on today. scott made me up a front pipe.

looks the sex.

Thanks scott!

quieter than before, with straight through 80mm confuses me.

[Commsman]

got my kakimoto on today. scott made me up a front pipe.

looks the sex.

Thanks scott!

quieter than before, with straight through 80mm confuses me.

How can that be Aaron? I've driven one with a Kakimoto & it was loud. What did you have on before? (sorry, it's probably listed 5 pages ago, just don't want to go looking).

[Daleo]

How can that be Aaron? I've driven one with a Kakimoto & it was loud. What did you have on before? (sorry, it's probably listed 5 pages ago, just don't want to go looking).

I'm pretty sure it looked a bit like this... lol?

Sorry Aaron, I saw this the other day, & I was just reminded of it. No hate

Edited March 14, 2011 by Daleo

[scotty nm35]

Not now, the tip was easy to remove.