Jump to content
SAU Community

Recommended Posts

Got the new 3.538 diffs in.....got some good umph now!!!!

My fears of the speedo being out are cured.....speedo and gps are exactly the same differences as they were before.

Care to explain how a change in diff ratio makes no diff (oh look, a pun) to the speedo reading? Am I missing something obvious?

Installed my new ECU this weekend.. NISMO Sportstune :banana:

Very first drive it is obvious the difference with the car being a lot more toey of the line. Best part to be experienced is in the mid range now coming on much stronger and faster.

Next step to put it on the Dyno and see what the AFR's are like and what the actual power out put is.

Is this enough power.. :whistling:

because (as i mentioned ages ago) the speed is taken from the ABS sensors on the OUTPUT of the rear diff. therefore no matter what ratio the diff is, assuming you dont change your rolling diameter, the speed will always be correct as the speed is measured after all the gearing.

where'd ya get that ratio, 34 gtr? I was thinking the same thing today.....

btw hills have a 4wd dyno. what computer?

Ratios are from then nm35 vq25dd or the pnm35....

....Hmmmm waiting for mark to give me a buzz back on the dyno.....to much longer and I'll be going to Victoria for a touch up!

Edited by Jetwreck

Installed my new ECU this weekend.. NISMO Sportstune :banana:

Very first drive it is obvious the difference with the car being a lot more toey of the line. Best part to be experienced is in the mid range now coming on much stronger and faster.

Next step to put it on the Dyno and see what the AFR's are like and what the actual power out put is.

Is this enough power.. :whistling:

The Nismo ECU's.. how do they go with economy? Better/worse?

Emanage is a piggy back...so it needs an existing ECU to control.

The nismo ECU has certain "awesomeness" in it that makes the car a bit better to drive....and speed cut too I think

Craig's car has the Nismo + emange combo...

The Nismo ECU's.. how do they go with economy? Better/worse?

better.......you have an economy setting, it uses the snow button!

Worse......the drive is a lot more inviting so you tend to get up it a little more.

I think the main thing is no speed cut and no throttle restriction isn't it?

Has anyone with the Nismo snipped the brake wire?

Don't need to worry about that now though... :whistling:

I think he means with the fcon, the stock ecu still controls the throttle though. There are 4 wires extra in the loom plug I can't account for which may make some changes, not sure.

I think he means with the fcon, the stock ecu still controls the throttle though. There are 4 wires extra in the loom plug I can't account for which may make some changes, not sure.

Doesn't explain how the throttle changed on my car.

Both much more responsive and also more soggy depending on map selected...

Doesn't explain how the throttle changed on my car.

Both much more responsive and also more soggy depending on map selected...

Without the infometer you are only guessing though. It could easily be tune related.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Ok thanks..that was my second question if i can somehow bypass this even with Nistune(that is all i have right now...aparat from stock ECU. So with some aftemarket it can by "bypassed" or make it work?  I know there is Link or Haltech (mainly used). We have ECUmaster here so i will gather some info about it.
    • Yes. You will need to get the original boost sensor and wire it in. That is.... if you plan to use a stock ECU - even a Nistuned ECU. The Nissan ECU will not operate correctly without it connected. And yes, it will do annoying stuff like you are experiencing. You will almost certainly be better off with some aftermarket ECU, than trying to hunt down rare sensors.
    • Ok so ABS/TCS is "not" the problem. Yeah i know now about the ABS with Nistune(i told that to the Nistune guy) but iam not 100% why or why i dont have ABS. ABS cube is in the engine (always has been) but i had braked couple of times rly hard and brakes just locked and scream. Does all Skylines have ABS cube? That boost sensor https://www.sau.com.au/forums/topic/367633-wtb-r34-gtt-turbo-pressure-sensor-pics-inside/ Is this it? I need to ask but i have a picture of engine bay and i do not see that (100% is not in that place) If i do not have this the car can do what mine is?(cutting around 4000 rpm) Here is the pic of my engine bay(only one i have) BUT i think i dont have that cuz loom was used from my RB20DE NEO and i know (obviously) that it does not have boost control or any wire to that...) so maybe that is the problem? (i dont know for 100% if that car where the engine is from had that)...but i dont have the loom from that
    • I'm with you here. It's either loom has an issue, OR, injectors are not functioning properly. It could even be they're just constantly dribbling, hence the wet, but not firing.
    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
×
×
  • Create New...