Jump to content
SAU Community

Recommended Posts

It's never a big deal when paying an hourly rate, lol.

$$$$$

True. There's a bit of quid pro quo going on here, so I know it'll work out.

Plus he'll be all set for the next person!

Plus he'll be all set for the next person!

Yeah, if he makes the outlet (turbo inlet) the same size as the metal gasket opening, that won't cause a restriction for anyone running std turbo up to most (all?) high flows (std housing). He'll have covered 99% of M35s with that. If he's successful with a template & does a reasonable job for a reasonable price, then I think he'd sell a few if they truly are bolt on.

However, Scotty's doubts (clearance/clocking variations etc) are totally valid & I tend to share them. It remains to be seen if a viable product will come out of it. Either way you'll be right because yours will be done :thumbsup:

Drove my car for the first time in a month or more & it was breaking down / running rough. Sounds very much like it was missing a cylinder.

Denso Iridiums IKH22's still the preferred plug?

I've not changed my plugs since I've had the car so may even be the originals, but anyone want to suggest anything else worth looking at?

Drove my car for the first time in a month or more & it was breaking down / running rough. Sounds very much like it was missing a cylinder.

Denso Iridiums IKH22's still the preferred plug?

I've not changed my plugs since I've had the car so may even be the originals, but anyone want to suggest anything else worth looking at?

Throw some metho in the fuel tank for starters (groups any water together and will it burn in the engine) and maybe replace fuel filter.

I fitted a HDI EBC-R yesterday and a silicone intake pipe. Love the HDI. Excellent quality, very simple and works well. Brings boost on fast, doesn't overshoot and holds it in the top end.

post-58831-0-09065800-1350207131_thumb.jpg

post-58831-0-11299300-1350207139_thumb.jpg

Looks like HKS OB LINK and wired into the standard screen via a tablet PC maybe?

http://www.hks-power.co.jp/en/products/electronics/monitor/ob-link/index.html

Edited by impul535w

Looks like HKS OB LINK and wired into the standard screen via a tablet PC maybe?

http://www.hks-power...link/index.html

Yep - OB Link and an android tablet - looks like the tablet wedged into the OEM pop up screen? LOL I can't tell

Unless its via mini HDMI > RCA video in into the headunit from a Android phone.

Tempting to try this with my 7" tab but I'm not ready to wreck my OEM display yet...

Edited by ironpaw

Ok now spill the beans!

Ok,

Duncbro is on the money. It's an OB-Link bluetoothed to an Android tablet which happens to be sitting in place of the factory screen.

The original plan was to remove the old screen & mount a 7" tablet in there that I could hook up to the OB-Link via BT.

Then I took the dash apart, measured up the innards of the screen cradle once the factory screen was removed & found i had 160mm to play with lengthwise & 95mm heightwise.

So I did a bit of searching around & there's no 7" tablet that would fit without interfering with the slider tracks that enable the cradle to retract back into the dash.

After a lot of research i found a 6" phablet (phone/tablet :woot: ) that would fit perfectly inside the cradle & still allow the home/menu/back buttons to be visible & able to be pressed.

I'll post some pics below of the innards of the cradle (I had the intention of taking heaps more pics, but as always, I got sidetracked & only took a small handful...sorry)

IMG_2111.jpg

IMG_2110.jpg

Old screen in its cradle

IMG_2112.jpg

Rear section of cradle with factory screen removed & release button mechanism visible

IMG_2113.jpg

Front half of cradle which the tablet will sit inside

IMG_2114.jpg

Tablet sitting in place inside the front half of the cradle

Now, I went for a pretty permanent solution here & glued the tablet to the inside of the cradle with polyeurethane - i could have made up some kind of elaborate bracket system inside there (the tablet is very thin compared to the factor screen) but i'd had about 5 beers by that stage, so glue seemed like a good option at the time.

The fit lengthwise was perfect. with the tablet sitting neatly in between the inside of the two slider channels, so snug in fact, it has no side to side movement whatsoever. Win.

There is a small gap on the top & bottom of the tablet however, but if it's centred up properly, it's not very noticable - unlike in my case, because i got impatient & wanted to put the car back together, i mounted it all up before the polyeurethane had set propertly & the tablet slid down a few mil, leaving a slightly bigger gap at the top than at the bottom.... my defence is that I'd had about 9 beers by that stage & it semed like a good idea at the time.

The only issues with mounting it all back in place were the location of the micro-USB port on the tablet - it sits dead centre in the middle of one of the slider channels, so I had to drill a hole in the channel & the tablet not gets its input externally through this hole when the cradle is in its raised position only - the cable has to be removed for it to slide back into the dash.

I also had to remove a spring-loaded locating peg which helps the cradle re-alighn itself if you try pushing it back down while it's tilted forward/back.... no big deal, it just means I have to be more careful to centre the cradle before I push it back in.

Pic below of the micro-USB to USB cable plugged into a cigarette lighter USB adapter for charging.

IMG_2125.jpg

The 2nd issue was the on/off button for the tablet - it's located on top, to the left of the cradle release button, which meant I had to drill a hole through the top of the cradle to access it & turn the unit on & off. I'll fix up a more permanent solution in the coming weeks in terms of a button that sits in the hole & actuates the power button on the tablet, but for now, I'm using a miniature screwdriver to poke into the hole & trun the power on/off when i need to. You can see the small hole in the cradle in the pic:

IMG_2121.jpg

Edited by Mr 20Valve

In case you're wondering, this is the tablet:

http://www.ebay.com.au/itm/Dapeng-i9800-6-Capacitive-Screen-Android-4-0-Dual-Sim-MTK6575-GPS-3G-Smartphone-/180947037207?pt=UK_AudioTVElectronics_PDAsAccessories_PDAs_JN&hash=item2a2148ac17

I got it for around $200 landed. It takes dual sim cards & a micro SD card - i've fitted a 32Gb micro-SD, but no sim cards... i've already got a smartphone & the sole purpose of this setup was to run the gauge cluster from the OB-Link, nothing more.

I must say, it does the job very well.

It probably does other things too, but I dont really give a shit. I've got a double din screen in the place of the factory headunit which has satnav, BT etc, so i dont really need the tablet for any of that.

And if you're wondering where I put my triple gauges from the dash, I put them here:

IMG_1647.jpg

and they were joined by a pair of 45mm gauges showing oil temp & oil pressure

IMG_2115.jpg

It's a pretty nice fit from those pics, be nice to be able to get rid of the buttons now though, can't have everything I guess.

i'm considering making a mould of the buttons below the screen & blanking it off, with the possibility of integrating a boost controller like an EVC6 or SBC i-Colour :ninja:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Well, I can recommend the partial AV system translation CD I ordered from Car Audio Workshop in NZ. Whilst it didn't address the date issue, it has conveniently translated on-screen menu items into English, and now allows the GPS-received time to be offset in hours rather than minutes, so I can display Eastern Australian time accurately ( and bump it by another hour when daylight savings starts ).
    • Yuh, if it's 45°C outside, my car is driving in it.
    • I'd be curious to hear more. Otherwise, have you driven a modern x-trail? I wonder how it compares. Here in Australia they are/were popular for rentals and fleet vehicles. I have been in some and my impression was they are bad. But, this may have been very different in the 2000s at a good trim level. Twenty years is plenty of time to make the model worse. I do very much agree with the 2 silver cars in the garage approach. But, not driving because it's too hot would not leave a lot of time in the year for many Australians. I don't think you need to worry too much unless the car has actual issues with overheating. 
    • Back again. I returned to Japan in Jul/Aug to spend time with the car on my birthday and remind myself what all the sacrifice and compromise is for. It happened to line up with the monthly morning meet in Okutama, which I have been wanting to go to for a long time. It's a unique event at a unique spot with really rare, interesting, and quirky cars. It's where all the oldheads and OGs gather. The nighttime scene at DKF certainly has its place and should be experienced if you're into cars, but there's too much bad attention and negativity around it now. IMO the better time is Sunday morning at DKF or Okutama; it's more chill and relaxed. I'm glad I was finally able to go, but not sure it's worth the drive from all the way from Nagoya immediately the day before, unless I was already staying in Tokyo for the days right before the meet, because you have to wake up quite early to make it in time. Funnily enough though I didn't drive the car all that much this trip because it was just too damn hot. While there were zero issues and running temps were nominal and the A/C was strong, RBs already run crazy hot as it is. Sure, it took it all like a champ but something about driving these cars in the ridiculous heat/humidity bothers me and makes me feel like I'm asking too much of it. I'm just me being weird and treating the car like a living thing with feelings; I'm mechanically sympathetic to a fault. Instead I was mainly driving something else around - a KX4(silver) 2001 X-Trail GT, that I acquired in May. There's a few different flavors to choose from with Xs, but visually it's the Nissan version of the Honda CR-V. Mechanically it's a whole different story as this, being the top-trim GT, has an SR20VET mated to a four-speed auto and full-time AWD! It was a very affordable buy in exceptional condition inside and out, with very low mileage...only 48k kms. Most likely it was owned by an older person who kept it garaged and well-maintained, so I'm really happy with how it all worked out. It literally needs zero attention at the moment, albeit except for some minor visual touch-ups. I wanted something quirky, interesting, and practical and for sure it handily delivers on all three of those aspects. I was immediately able to utilize the cargo and passenger capacity to its full extent. It's a lot of fun to drive and is quite punchy through 1st and 2nd. It's very unassuming -in the twisty bits it's a lot more composed than one would think at a glance- and it'll be even better once I get better tires on it(yes, it's an SUV but still a little boat-y for my liking). So...now I have two golden-era Nissans in silver. One sports car and one that does everything else; the perfect two-car solution I think👍 The rest of the trip...I was able to turn my stressed brain off and enjoy it, although I didn't quite get to do as much as I thought. I did some interesting things, met some interesting people, and happened into some interesting situations however, that's all for another post though only if people really want to know. Project-wise, I went back to Mine's again to discuss more plans and am hoping to wrap that up real soon; keep watching this space if that interests you. Additionally, while working in the tormenting sweatbox that is the warehouse, I was able to organize most of the myriad of parts that my friend is storing for me along with the cars, and the 34 has a nice little spot carved out for it: And since it can get so stupid hot in there, that made it all the more easy -after I was standing there looking at the car and said 'f**k it'- to finally remove all the damn gauges that have mostly been an eyesore all this time. Huzzah. The heat basically makes the adhesive backing on the gauge mounts more pliable to work with, so it was far less stressful getting this done. I didn't fully clean it up or chase the wiring though; that will happen once I have the car in closer possession. Another major reason to remove all that stuff is to give people less reasons to get in my car and steal s**t while it's being exported/imported when/if the time comes, which leads us to my next point... ...and that is even though it's time in Japan is technically almost up since it's a November car and the X would be coming in March, I'm still not entirely sure where my life and career is headed; I don't really know what the future looks like and where I'm going to end up. I feel there's a great deal of uncertainty with me and as a result of that, it feels like I'm at a crossroads moreso now than any point in my life thus far and there are some choices I need to make. Yes, I've had some years to consider things and prepare myself, however too much has happened in that time to maintain confidence and everything feels so up in the air; tenuous one might say. Simply put, there's just too much nonsense going on right now from multiple vectors. Admittedly, I'm struggling to stay in the game and keep my eyes on the prize. So much so in fact, that very recently I came the closest I ever have before to calling it quits outright; selling everything and moving on and not looking back. The astute among you will pick up on key subtext within this paragraph. In the meantime I've still managed to slowly acquire some final bits for the car, but it feels nice knowing there's not much left to get and I'm almost across that finish line; I have almost everything I'll ever want for my interpretation and expression on what it is I think an R34 should be. 'til later.
    • Thanks for that, hadn’t used my brain enough to think about that. 
×
×
  • Create New...