Jump to content
SAU Community

Recommended Posts

Been running it on united 100 since i've been back, its the same price in Qld as 91 octane is in Tas haha

It's been pulling to the left since i nudged a kerb pretty hard even after a wheel alignment or two

and has a rattle over uneven road that i swore was sway bar links but its still there even (but quieter now) after the new whiteline links

so i took it into Pedders today for a $14 check

rack bushes and caster bushes are soft apparently and thats it

so will go for some adjustable caster bushes and nolathane rack bushes

other than that, the front sway bar is going pretty well, rear bar may be on order soon

found a seller in the us who can do it for around $220 delivered: http://www.ebay.com.au/itm/370691983118?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1438.l2649#ht_6027wt_1055

took the stagea out yesterday damn have i missed driving it, going to retune it to put it on bp ultimate though

Moving from E85 to BP Ultimate - why?

Lots.

Needs more info.

I fixed my coolant leak, and refitted the strut brace. Car is f**king awesome.

Dropped past Autobarn to pick up the rest of what I needed for the radiator install - coolant, distilled water, a drip tray, fan controller, adaptor for the BSP fitting, and a couple of hose clamps.

Headed home and started to fit the fan controller before I realised it was a POS. Cables are retardedly short, and the BSP temp sensor fell apart. Returning tomorrow.

Also pulled the front bar off, and the lights out to fit the LED parkers I've had lying around for ages. Found it was easier to spend 2 minutes pulling the bar off to replace the parkers than spend 20 minutes trying to dick around in the front wheel well. Looks pretty awesome.

where i live there is no e85 its totally outa my way considering we use the car everyday

Good reason, but begs the question why you set it up on E85 in the first place...? I bet you spent too much time talking to Scotty, lol.

where i live there is no e85 its totally outa my way considering we use the car everyday

There is a United on Princess just near your place apparently, otherwise it's just down the road in Springvale, or Blackburn road... Sounds like excuses to me. lol.

Threw a new pair of rear tyres on mine today; the new turbo definitely sorts out treadwear...

I know your fastidious, but if you haven't had a good alignment lately, might be worth checking one out.

I had a shed load of rear toe in, and it has worn my rears quite significantly compared to the fronts. Swapped them to the fronts to try and get some more milage post alignment.

I know your fastidious, but if you haven't had a good alignment lately, might be worth checking one out.

I had a shed load of rear toe in, and it has worn my rears quite significantly compared to the fronts. Swapped them to the fronts to try and get some more milage post alignment.

Lol, by the time I saw how much wear there was on the rears, it wasn't worth rotating them.

I've got a set of SPC toe & caster eccentric bolt kits to go in, but haven't had time to fit them...

Might need to book a slot at the Nismo bro Stagea workshop to get up on the hoist with a die grinder.

Once they're in, I can set toe & camber to somewhere slightly more neutral.

I've got a set of SPC toe & caster eccentric bolt kits to go in, but haven't had time to fit them...

Might need to book a slot at the Nismo bro Stagea workshop to get up on the hoist with a die grinder.

I have a set here too but i'm too scared to wreck the subframe. (even though I have a spare here.) Make Craig take pics like the bi*ch he is.

Lol, by the time I saw how much wear there was on the rears, it wasn't worth rotating them.

I've got a set of SPC toe & caster eccentric bolt kits to go in, but haven't had time to fit them...

Might need to book a slot at the Nismo bro Stagea workshop to get up on the hoist with a die grinder.

Once they're in, I can set toe & camber to somewhere slightly more neutral.

I did mine with an Ozito replica dremel lying under the car on the floor of my driveway. :O

A hoist is a great idea, let me tell you.

I have a set here too but i'm too scared to wreck the subframe. (even though I have a spare here.) Make Craig take pics like the bi*ch he is.

What's your worry?

You're only elongating tue slotted holes that already exist. A man of your skills should be able to sort that.

If you don't like them you can always refit the OEM stuff.

Spoolin - ive got a bit of a bone to pick with you over those RSR springs.. they squeek like f**k and make noises daily and you charged me more for these crappy second hand springs than they even were new from import monster with shipping...

again.. watch out for dodgy f**ks on here.. selling you shit thats simply not worth it.

Did you wrap the top and bottoms with coil tape? This is to stop squeaking springs you know...

Did you wrap the top and bottoms with coil tape? This is to stop squeaking springs you know...

great bump mate - it was only nearly 2 years ago.

dude had a financial meltdown and disappeared after selling up agggggeeeeeesssss ago.

great bump mate - it was only nearly 2 years ago.

dude had a financial meltdown and disappeared after selling up agggggeeeeeesssss ago.

LOL WOW, clicked on the link from my content, must've taken me to about page 1 :O

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...