Jump to content
SAU Community

Recommended Posts

Well thanks for jet r31 getting me off my butt and giving me a hand, I've nearly finished hooking up my water/meth injection, then it's tune time again see what happens :) cheers brother . Also I fitted up my rear brake conversion and front adjustable camber and radius rod arms and chucked in a set of new tie rod ends and a afr gauge to go with the rest of the info in my cockpit

Well thanks for jet r31 getting me off my butt and giving me a hand, I've nearly finished hooking up my water/meth injection, then it's tune time again see what happens :) cheers brother . Also I fitted up my rear brake conversion and front adjustable camber and radius rod arms and chucked in a set of new tie rod ends and a afr gauge to go with the rest of the info in my cockpit

Ready for the cruise? Or you taking the daily?

Had my drivers side front wheel bearing replaced this morning; nice & quiet again.

Not doing it myself was the best $160 I've spent this week.

God I'm lazy. :woot:

Edited by Daleo
  • Like 1

Had my drivers side front wheel bearing replaced this morning; nice & quiet again.

Not doing it myself was the best $160 I've spent this week.

God I'm lazy. :woot:

You are lazy! Easy job is easy!

Just got back from the retune.

Car now runs on the MAP sensor. MUCH MUCH MUCH more responsive, but no more power. Apparently 200kW on a Dyno Dynamics now, but no print out.

The weird thing is it's running Scotty's modded actuator and only running 9psi at the top - so it's 2psi more than last time with the stock actuator.

Got to get this boost sorted, and find out why it seems to be speed limiting still.

Much better package though, and much happier. Just want my farkin boosts!

9psi? it sounds like you have a leak in the vac line, or yours is the only turbo not holding boost.

Did your turbo have a larger wastegate puck or something?

Perhaps the actuator doesn't have enough preload?

9psi? it sounds like you have a leak in the vac line, or yours is the only turbo not holding boost.

Did your turbo have a larger wastegate puck or something?

Perhaps the actuator doesn't have enough preload?

Check this. You need about 3mm of the width of the hole on the actuator for preload imo.

Perhaps the actuator doesn't have enough preload?

Bigkev ,no print out I would be asking "demanding a print out " it's an important reference to your car it's no good having all the bells and whistles and not having a guide to what it's doing and be a grumpy man if I was you

^ This. Just what the hell are they doing Ryan? You'd think for a shop with such a reputable name, they'd be a bit more helpful... or is it because you don't have an R35?

I think he's had someone else look at it..? or run it elsewhere. Dunno who has an AWD Dyno Dynamics unit off the top of my head!

Apparently 200kW on a Dyno Dynamics now, but no print out.

Ryan, check out Theo's boost drop. He's stock turbo too, I suspect it's all about running out of compressor flow.

http://www.skylinesaustralia.com/forums/topic/357886-lambchop-with-a-renault-axis-here/?p=6493662

Ryan, check out Theo's boost drop. He's stock turbo too, I suspect it's all about running out of compressor flow.

http://www.skylinesaustralia.com/forums/topic/357886-lambchop-with-a-renault-axis-here/?p=6493662

When I had my stock turbo it would hold at least 13psi to redline. No doubt it does run out of flow, but 9psi sounds too low.

How is boost control being done Ryan?

Thanks guys. I'll try and tick everything off...

9psi? it sounds like you have a leak in the vac line, or yours is the only turbo not holding boost.

Did your turbo have a larger wastegate puck or something?

Perhaps the actuator doesn't have enough preload?

I've replaced every vac line now I think. I can't see how that would be it.

Stock turbo, stock wastegate puck. Andrew at AM wants to bore out the wastegate 1mm but nothing has been done yet.

Actuator is your modified one, exactly how you sent it to me. If it needs more preload do I just put a stronger spring on?

Check this. You need about 3mm of the width of the hole on the actuator for preload imo.

Perhaps the actuator doesn't have enough preload?

Which hole Craig?

Bigkev ,no print out I would be asking "demanding a print out " it's an important reference to your car it's no good having all the bells and whistles and not having a guide to what it's doing and be a grumpy man if I was you

^ This. Just what the hell are they doing Ryan? You'd think for a shop with such a reputable name, they'd be a bit more helpful... or is it because you don't have an R35?

Thanks guys. No printout, it was supposed to just be a fix session and the map ended up being redone. I could have asked for the printout. I didn't. I'd just sat in the passenger seat and seen the whole thing so didn't think to ask.

Ryan, check out Theo's boost drop. He's stock turbo too, I suspect it's all about running out of compressor flow.

http://www.skylinesaustralia.com/forums/topic/357886-lambchop-with-a-renault-axis-here/?p=6493662

Mine was similar to that (although wtf is that at the end of the drop off?!). I wouldn't have thought it was running out of compressor flow that early? I thought others had more success on the stock turbo. Funny that Theo and I have both changed the vac hoses, and both get similar graphs.

When I had my stock turbo it would hold at least 13psi to redline. No doubt it does run out of flow, but 9psi sounds too low.

How is boost control being done Ryan?

Scotty's modded actuator with the HKS EVC.

9psi is the boost I used to get when my boost solenoid would stick open. Sounds like the wastgate is fully opening.

Weird thing is, it was 7psi without the modded actuator, 9psi with.

I want to see if I can find the boost problem, fix it, then take it to somewhere else to get the EVC setup properly and the tune checked.

For the record, the original tuner (who I won't name on here but some people know) once I explained all the issues offered to fix it, ended up retuning on MAP instead of AFM at my request, and spent near enough to two hours with me explaining things and talking about it. So far it seems like they have fixed it and improved it no end, but at the request of a few people I'll get it checked out just for peace of mind.

My actuator has almost 5mm of preload, the stroke of the thing is huge.

The hole Craig is talking about is the hole in the Wastegate arm, that the pivot pin goes through.

Boring out the Wastegate isn't going to make it hold boost better, if anything; it will allow you to bleed boost pressure more easily.

It would be worth doing if you were building boost pressure uncontrollably, but you have the exact opposite issue.

My actuator has almost 5mm of preload, the stroke of the thing is huge.

The hole Craig is talking about is the hole in the Wastegate arm, that the pivot pin goes through.

Boring out the Wastegate isn't going to make it hold boost better, if anything; it will allow you to bleed boost pressure more easily.

It would be worth doing if you were building boost pressure uncontrollably, but you have the exact opposite issue.

What's stock? From memory 3mm isn't it? And I didn't think Scotty modified that hole. Should I drill it out to 5mm?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
    • BTW I measured the jack I have, it is 70mm at the saddle but you only have about 700 until it returns to 150mm high at the cylinder so it is good but no magic bullet.
    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
    • I was able to get some underside photos while the car was on the ramp The suspension is all Altezza/IS200/IS300 so getting part's will hopefully be less of a headache
    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
×
×
  • Create New...