Jump to content
SAU Community

Recommended Posts

What's stock? From memory 3mm isn't it? And I didn't think Scotty modified that hole. Should I drill it out to 5mm?

Lol, no mate; don't drill the hole out.

Preload basically means that the arm will be too short to reach the pivot pin on the Wastegate arm. You'll need to pull against the actuator spring and stretch it into position. That extra stretch is preload.

Lol, no mate; don't drill the hole out.

Preload basically means that the arm will be too short to reach the pivot pin on the Wastegate arm. You'll need to pull against the actuator spring and stretch it into position. That extra stretch is preload.

Lol ok. Not sure how much preload I have, but it sounds like a stronger spring will give more preload?

I think sometimes when I weld the spring mounts on the actuator it may grow in length slightly, (don't get too excited Craig, dirty mind.) This can be counteracted by simply sliding a washer or two under each of the mounting points on the front housing. There should be 3-5mm of preload which means you should have to slide the shaft out of the actuator 5mm before it will clip on to the wastegate arm, it will take a bit of force as the springs are so strong. It sounds like yours needs more preload in any case Ryan.

I've replaced every vac line now I think. I can't see how that would be it.

There is a restrictor of some sort in one of those hoses (going to the wastegate?). Did you leave that in or remove it?

I think sometimes when I weld the spring mounts on the actuator it may grow in length slightly, (don't get too excited Craig, dirty mind.) This can be counteracted by simply sliding a washer or two under each of the mounting points on the front housing. There should be 3-5mm of preload which means you should have to slide the shaft out of the actuator 5mm before it will clip on to the wastegate arm, it will take a bit of force as the springs are so strong. It sounds like yours needs more preload in any case Ryan.

Wait... So you want my shaft to grow in length? :P

Cool, well washers sound like an easy solution. I'll give that a crack and see how I go. 1-2 washers should give me an extra 2-3mm preload.

There is a restrictor of some sort in one of those hoses (going to the wastegate?). Did you leave that in or remove it?

I was gonna suggest the same thing

Yeah there is a restrictor, but when I replaced the hoses I knew this was there and was cutting all the hoses apart to find them. Maybe I missed one, because I didn't find one.

If its in the hose from the boost solenoid to the wastegate, is it something I can go and get from Repco/Autobarn/SuperCheap and just replace?

The restrictor is in the stock bleed solenoid lines which I assume were removed to install the boost controller, either way the restrictor is only there to bleed the correct amount of boost off, if you remove it you will run almost unlimited boost, not have boost drop.

i dont this to mine yesterday. i steam blasted the top cover cause of the temp switch and other crap on it i didnt want to drop it in the tank over night. but the bottom cover got a tanking and ended up like this after the carbon build up.

Top cover
SA501699_zpscf12718e.jpg
Bottom
SA501700_zps44e14716.jpg

^^^ VQ25/30DD?

I washed mine today as I'm heading to the SAU NSW tech night tonight. I just love the way it looks after a wash, specifically standing back and looking at this, so I thought I'd share!

8677538210_96fcbd5eb9_c.jpg

^^^ VQ25/30DD?

I washed mine today as I'm heading to the SAU NSW tech night tonight. I just love the way it looks after a wash, specifically standing back and looking at this, so I thought I'd share!

8677538210_96fcbd5eb9_c.jpg

You have big snails in your front yard!!! WTF is with that??

finally ive been waiting to post this. :yes:

cars tuned, very happy with the results its been a long time( almost 3 months) with issue and constantly annoying the guys on here.. but first in WA :)

it is road tuned so no dyno results as yet guys but its a big improvement and im sitting at 19.5psi :)

id really like to thank Scotty, Craig, Ryan and of course all the others for imput for helping me through the tuning/ mehanical issues ive had. :cheers::cheers::cheers:

i will get dyno run for all you doubters eventually lol

  • Like 1

Had noble intentions today of fitting up the LSD rear end & the Scotty dump, front pipe & new Blitz Nür catback I got the other day...

Diff went in fine, but I was foiled utterly by the stock dump pipe... :(

I even called Scott to walk me through it, but couldn't for the life of me remove the O2 sensor with the tools I had - and as a result I couldn't get to the top centre nut to the dump pipe flange.

Fitted up the rest of the exhaust to the stock dump (will be forced to ask Craig to do it for me while I hang my head in shame) and I'm glad to report that its SUPER quiet. At idle, it's not much louder than the standard exhaust & probably just as loud as the induction roar on WOT.

Will be interesting to see if there's any change in noise levels once the factory dump/cat is swapped for the good one...

Edited by Mr 20Valve

Haha, its a ripper that bolt, and why I offset the o2 bung on my dump pipes. It will go together and come out again much easier once Craig fits it.

The dump makes the difference as it is the main exhaust restriction.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...