Jump to content
SAU Community

Recommended Posts

Gives more accurate toe adjustment rather than slotting the subframe.

G35 toe.jpg

Thought this was pretty cool if you want to keep the separate spring and shock.

G35 control arm.jpg

Yup that one works out much better. Maintaining the oem points but allowing adjustability.

To compare which works better (coil over vs oem) the next is to find what the oem spring sits below.. chassis support rail etc

Just filled upon pump 98! Petrol is cheap today! But still thought e85 would be cheaper!? &&0){for(var>

hell id go e85 thats cheaper than 98 here still $1.38 :( ..... but i dont know how a product that only has 15% actual fuel how much is ethanol per barrel

Edited by stripey

Exhaust done and dusted.

Amazing job. Really happy with how it turned out. Sits much more snug against the car which was what i was really hoping for :)

Sounds great. Not loud or droney and not much cabin noise (we did do a good job with insulation when i swapped the centre console when the manual was added).

On too the next job!!! :)

post-104324-0-69992400-1454660348_thumb.jpg

post-104324-0-81386000-1454660350_thumb.jpg

post-104324-0-07422400-1454660352_thumb.jpg

post-104324-0-71199900-1454660353_thumb.jpg

post-104324-0-18187600-1454660355_thumb.jpg

post-104324-0-37412400-1454660356_thumb.jpg

post-104324-0-64844100-1454660357_thumb.jpg

post-104324-0-32969900-1454660359_thumb.jpg

post-104324-0-07216200-1454660361_thumb.jpg

Edited by Beregron
  • Like 5

Exhaust done and dusted.

Amazing job. Really happy with how it turned out. Sits much more snug against the car which was what i was really hoping for :)

Sounds great. Not loud or droney and not much cabin noise (we did do a good job with insulation when i swapped the centre console when the manual was added).

On too the next job!!! :)

This is nice man!

Do you have a build thread?

Put my m35 on a dyno today.

165awkw with a dump pipe back 3"exhaust.

Pretty happy with those numbers i think!

Going to go back after getting Scotty's dump pipe and see what kind of difference it actually makes. Everyone say's it makes a big difference, so we'll find out!

^Nice job! Looks awesome! Was it an exhaust shop or the same place that did your manual conversion?

Its the bloke who owns the shed next to the place that did my manual conversion. He does custom fabrication.

oh FFS, i'd finally settled on an MCA suspension because I couldn't replicate stock height with the BC's and then you all go and confuse the issue with your 'opinions' and stuff. WTF is this, a forum?

So in summary, going stock and replacing my shocks with OEM shocks will cost like 1200 (front and back) so they're out, BC's are out because they're too low at the back, MCA's are out because they're potentially unsafe and I need to have the car registered in VIC so it's going through the pits.

there's gotta be an easier way...

oh FFS, i'd finally settled on an MCA suspension because I couldn't replicate stock height with the BC's and then you all go and confuse the issue with your 'opinions' and stuff. WTF is this, a forum?

So in summary, going stock and replacing my shocks with OEM shocks will cost like 1200 (front and back) so they're out, BC's are out because they're too low at the back, MCA's are out because they're potentially unsafe and I need to have the car registered in VIC so it's going through the pits.

there's gotta be an easier way...

Get a set of nismos

<script pagespeed_no_defer="">(function(){var g=this,h=function(b,d){var a=b.split("."),c=g;a[0]in c||!c.execScript||c.execScript("var "+a[0]);for(var e;a.length&&(e=a.shift());)a.length||void 0===d?c[e]?c=c[e]:c=c[e]={}:c[e]=d};var l=function(b){var d=b.length;if(0=d.offsetWidth&&0>=d.offsetHeight)a=!1;else{c=d.getBoundingClientRect();var f=document.body;a=c.top+("pageYOffset"in window?window.pageYOffset:(document.documentElement||f.parentNode||f).scrollTop);c=c.left+("pageXOffset"in window?window.pageXOffset:(document.documentElement||f.parentNode||f).scrollLeft);f=a.toString()+","+c;b.b.hasOwnProperty(f)?a=!1:(b.b[f]=!0,a=a<=b.e.height&&c<=b.e.width)}a&&(b.a.push(e),b.d[e]=!0)};p.prototype.checkImageForCriticality=function(b){b.getBoundingClientRect&&q(this,b)};h("pagespeed.CriticalImages.checkImageForCriticality",function(b){n.checkImageForCriticality(b)});h("pagespeed.CriticalImages.checkCriticalImages",function(){r(n)});var r=function(b){b.b={};for(var d=["IMG","INPUT"],a=[],c=0;c=a.length+e.length&&(a+=e)}b.g&&(e="&rd="+encodeURIComponent(JSON.stringify(s())),131072>=a.length+e.length&&(a+=e),d=!0);t=a;if(d){c=b.f;b=b.h;var f;if(window.XMLHttpRequest)f=new XMLHttpRequest;else if(window.ActiveXObject)try{f=new ActiveXObject("Msxml2.XMLHTTP")}catch(k){try{f=new ActiveXObject("Microsoft.XMLHTTP")}catch(u){}}f&&(f.open("POST",c+(-1==c.indexOf("?")?"?":"&")+"url="+encodeURIComponent(b)),f.setRequestHeader("Content-Type","application/x-www-form-urlencoded"),f.send(a))}}},s=function(){var b={},d=document.getElementsByTagName("IMG");if(0==d.length)return{};var a=d[0];if(!("naturalWidth"in a&&"naturalHeight"in a))return{};for(var c=0;a=d[c];++c){var e=a.getAttribute("pagespeed_url_hash");e&&(!(e in b)&&0=b[e].k&&a.height>=b[e].j)&&(b[e]={rw:a.width,rh:a.height,ow:a.naturalWidth,oh:a.naturalHeight})}return b},t="";h("pagespeed.CriticalImages.getBeaconData",function(){return t});h("pagespeed.CriticalImages.Run",function(b,d,a,c,e,f){var k=new p(b,d,a,e,f);n=k;c&&m(function(){window.setTimeout(function(){r(k)},0)})});})();pagespeed.CriticalImages.Run('/ngx_pagespeed_beacon','http://www.sau.com.au/forums/index.php?s=d9d7d5f9aae700dcf581ad86f47d27a0&app=forums&module=ajax§ion=topics&do=quote&t=348629&p=7679168&md5check=7effc82b1ab70c8da717535c12f6830d&isRte=1,6YgIICLrb3,true,false,1FH37t1LSRI');</script>

Turned out alright.&&0){for(var>

That's a familiar looking colour.... :thumbsup:

  • Like 1

oh FFS, i'd finally settled on an MCA suspension because I couldn't replicate stock height with the BC's and then you all go and confuse the issue with your 'opinions' and stuff. WTF is this, a forum?

So in summary, going stock and replacing my shocks with OEM shocks will cost like 1200 (front and back) so they're out, BC's are out because they're too low at the back, MCA's are out because they're potentially unsafe and I need to have the car registered in VIC so it's going through the pits.

there's gotta be an easier way...

Are all the shocks dodgy? If not then just replace the unroadworthy ones with "good" second hand ones and then put the MCAs on after you get roadworthy.

oh FFS, i'd finally settled on an MCA suspension because I couldn't replicate stock height with the BC's and then you all go and confuse the issue with your 'opinions' and stuff. WTF is this, a forum?

So in summary, going stock and replacing my shocks with OEM shocks will cost like 1200 (front and back) so they're out, BC's are out because they're too low at the back, MCA's are out because they're potentially unsafe and I need to have the car registered in VIC so it's going through the pits.

there's gotta be an easier way...

They sell spring platforms or spacers to raise the springs for bCs don't they?

I think it's just having everyone's best interests at heart. Can always resell..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...