Jump to content
SAU Community

Recommended Posts

  • Replies 81
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

  On 23/01/2011 at 12:56 AM, ironpaw said:

Will 18 x 9.5 +30 fit ok?

I know the GTR rims fit fine and they are 9.0 +30....

Dont want to buy rims that dont fit...again!

I would stick to 9 inch +30, mine stuck out a little on the front and were nearly rubbing on the inside but they are 17's.

  On 23/01/2011 at 3:50 AM, ironpaw said:

hmm pardon my ignorance...so the taller the rims the more clearane there is?

Yep, the bracket bends around the tyre, as you will see when you change them over.

I must admit, it makes the car handle the corners well with the 9 inch rims with semi's but the refinement I have now with the 8 inch + 235 road tyres makes up for it. No hint of tramlining or noise, good grip, its only the softer sidewalls causing it to feel a bit squirmy turning a tight radius corner.

Can anyone vouch for the accuracy of this site?

http://www.rimsntires.com/rt_specs.jsp

Apparently if I go 245/45/18 x 9.5 +30 it'll be the same (clearance wise) as my stock 215/55/17 x 7 +45 setup...and it'll stick out 30mm

Edited by ironpaw
  • 2 weeks later...

please clarify

i have been told from numerouse mag wheel dealers that 9.5 on the stagea is to wide and will creat issues

i am looking at dropping my m35 on some BC BR coilovers and running big break kits witch mean ill be running 19 inch mags

so what size width mags can i get with 19s? that i can use on the stagea that wont rub 8.5s or 9s

if i get a spacer does that mean i can go wider ?

with offset does a - or a + offset mean a bigger dish etc

or do u guys recomend 18s for the stagea

  On 07/02/2011 at 2:59 AM, Sidius said:

please clarify

i have been told from numerouse mag wheel dealers that 9.5 on the stagea is to wide and will creat issues

i am looking at dropping my m35 on some BC BR coilovers and running big break kits witch mean ill be running 19 inch mags

so what size width mags can i get with 19s? that i can use on the stagea that wont rub 8.5s or 9s

if i get a spacer does that mean i can go wider ?

with offset does a - or a + offset mean a bigger dish etc

or do u guys recomend 18s for the stagea

Spoolin12 , is running 19x9.5 at what must be around+20 odd now. At +30 his were still under the guards... Just. The tops tuck in more the lower you go.

He'd be the man to talk to, as I think his rims are probably the widest and the most aggressive offsets on here.

+ or - doesn't mean anything with regard to dish; only offset. However, the closer to a -ve offset you go; the better chance of dish.

  On 07/02/2011 at 3:09 AM, Daleo said:

Spoolin12 , is running 19x9.5 at what must be around+20 odd now. At +30 his were still under the guards... Just. The tops tuck in more the lower you go.

He'd be the man to talk to, as I think his rims are probably the widest and the most aggressive offsets on here.

+ or - doesn't mean anything with regard to dish; only offset. However, the closer to a -ve offset you go; the better chance of dish.

He told me he was running +40's? so he must've been running a 10mm spacer...

Guess my 9.5 +12 LE37's ain't gonna fit without guards being rolled!

What brand/model rims did Spoolin run?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Brakes definitely won't make him faster. They only slow you down. 😛
    • cool car to be working on, but I think you need some really old school help on this one
    • Hey, I understand this is a skyline forum but I was hoping someone might be able to help me out here. Got an ‘84 M10 Prairie with an E15S that I’m trying to get running again after replacing a head gasket. I’m having some struggles with vacuum lines after replacing a couple perished ones. They’re all set up like in the diagram I’ve attached. I’ve tried starting the motor and my carb backfires a bit but no luck getting it to run.      Theres a 2nd port on the back of the carb that isn’t mentioned in the diagrams, right next to what I believe would be the idle screw (sorry I’m no good with carbs) - should this be attached to any lines?   any help would be greatly appreciated, I’m sick of pulling my hair out trying to figure this thing out 🤝🏼
    • If the current relationship is between the diff and the speedo, then no, you will not need a speed sensor in that hole in the gearbox. If the car were an R33 GTST, or an R34 GT-T, then it would need a speed sensor in there. Because that's what those cars have/need. If the car were an R32, then it will need a cable drive cobbled together from a Navara speedo drive, because R32s can't handle an electronic speed signal to the speedo.
    • Just to follow up on this.  Will the speedo work with this? Like to have plugged speed sensor on this trans and still using one on diff from N/A (open) diff?
×
×
  • Create New...