Jump to content
SAU Community

Recommended Posts

reposting my Stock 17 inch Stagea wheels...

$350.

Tyres are basically brand new generic brand, wheels are also almost prefect aside from one tiny mark.

I can sms pictures to anyone interested.

Pick up only from Seaford area.

Cheers folks.

Edited by Beregron

R33 boot trim Make an offer

R33 straight pipes turbo back mild steel, cannon at the end. $200 Ono

r33 front adjustable strut brace $70

Sr20det manual ecu $90

Genuine type x spoiler 180sx $110 Ono

s13 stock front and dump pipe $50

R33 battery tray with fuse box etc $40

RB crossmember with 33 engine mounts $50

R33 manual tailshaft $80

Set of Vskfs 18x9 +33 & 18x9.5 +39. Had them in the garage for a few years and need the space

drift wheels as theyve got gutter rash and 1 has a minor kink in the inner lip.

Or u could refurbish them.

$600 obo wont go lower than 500

Willing to swap for parts, ie. EBC, JZX100 parts (coilovers). I'll try get pics uploaded tomorrow.

post-16827-0-49841200-1374109457_thumb.j

The wheel with the inner kink, I dunno how the previous owner did it but I bought these wheels like it from Japan and was misinformed on the actual condition of the wheels:

post-16827-0-75746200-1374109644_thumb.j

Work Euroline DH -pretty good, some minor rash on 2 rims, does NOT come with tyres.

5x114.3

18x8 +7

18x9 +7

Suit Toyota, Nissan and Ford

-$1000ono

post-16827-0-88872300-1374110119_thumb.j

S13/180sx Front reo bar UNCUT

-$60

post-16827-0-27517300-1374197982_thumb.j

very keen on vskfs pms sent

  • Like 1

For sale - Logitech G27 Steering Wheel / Racing Wheel in perfect condition. Includes wheel, pedals and shifter. $400 neg.
Located Adelaide (southern). Pick up only, local delivery can be negotiated.

Mounted on a home engineered stand. Pedals are adjustable for position on base.
Wheel angle, wheel height and shifter are adjustable to suit your seating position.

This stand has specifically been built to suit a lounge/couch seated position. Can be adjusted to suit any seating style.

Wheel/stand folds down flat for ease of storage, trolley wheels to assist in moving it around. The base is quite thick/heavy to ensure the set up wont move around with intense racing/force feedback from the G27. Rubber feet also ensure it grips a tile/slate floor surface.

Perfect for you PS3 or PC, works amazingly with GT5 and LFS.

dsc9542.jpg

dsc9524.jpg

dsc9521.jpg

dsc9523i.jpg

not loud enough still bud?

Haha, I didn't even try putting it on, changed my mind again so the current one will be staying on there for now. :P My ocd kicked in. :( Is my old exhaust quiet enough for ya? :laugh:

attachicon.gifimages.jpg

Brother MFC 9210 printer for sale $100

It would make a good small office printer. In excellent condition. Pick up only Nth Suburbs

Brad 0427999093

Bump $50

Pair of Britax LED beacons for sale

(as most would have seen on either my Patrol or on my Ranger)

These are 2 spare units that i have that are now taking up space. If you're needing a yellow flashing light for your vehicle for going onto a construction site, these are a good bang for buck unit

Specs:

Clear Polycarbonate Lens with Twelve LEDs
12 Auxiliary LEDs in the Top of the Beacon Provide 360° Vertical and Horizontal Coverage
Waterproof, Shock Resistant, Potted Circuit Board
Permanent Mount configuration (if you want to mount them on a standard roof bar mounting plate, the holes are standard pattern the same as any Narva or Hella flashing light unit)
Black Powder Coated Die-Cast Base
Thirty Built-in Flash Patterns, Including Four Simulated Rotating Patterns
Alternate or Simultaneous Flash Patterns with up to Eight Connected LED Beacons

12/24V applications

Come with instruction book, laser cut brackets, and pre-wired with Narva waterproof plugs

$200 for the pair

Contact me via PM

2drvz8h.jpg

R33 3" Catback to AMPerformance 4" Twin Tips.

Asking $400.

attachicon.gif20130703_172158.jpg attachicon.gif20130703_172221.jpg

Bump, $350!

its perfect bud missus just wants to change the big ass tip haha

Haha awesome! Nothing wrong with the tip! :P It even has the 'Momocorse' logo on it! :laugh:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Nah that is not actually a lot. Just painting my GTR frontend and the little bits to make sideskirts/nismo flare pieces work correctly/fit on the sedan/mount up correctly came to about $7000. Is it a lot? Sure. None of this is economical. Economy would be shelling the car and buying a 2010 Corolla to commute in. The perspective of all of this is different.
    • I have the 2025 build re003s’ on my 06 XT Forester Turbo and I quite rate them for street wet and dry
    • I don't see any issues here. I've been saying all along this is a big job, the price reflects that.  When the car comes back perfect I'm sure it will feel like money well spent. 
    • Remember, take original quote. Double it. Then add a bit more. It's how any project goes.
    • So, I started this repair and got as far as "fixing" the holes with some fibreglass. God all those years working on boats came back quickly. I decided I'd reach out to some rust guys just to see what they would say about it. I came across a guy about 40 mins away and went to see him. He said the windscreen needs to come out, that there might be some more bits around the windscreen and he'd quote them at the time. But his quote was $300 to remove and replace windscreen and $3k for the damage he can see. He said he could respray the roof for $1200 and the bonnet for another $800 (somebody has previously rattle canned it, its horrendous). This is $5300 + any small additional bits. It's a lot, I get that and the name of one of my fave youtube channels 'Not Economically Viable' comes to mind.  I'm not being financially rational, but I've taken him up on the quote. He's opening a new shop in November with more room, so we're waiting for that. I'll leave the currently missing headliner out until then. I'm looking forward to it being fixed and having the paint looking nice again (lots of clear coat issues on the roof too). / flame suit on.
×
×
  • Create New...