Jump to content
SAU Community

Recommended Posts

I've come up with this after the 2011 supercab thread with teams somehow getting an extra few laps from the car without running out of fuel.

So what have you seen/heard on the grapvine/read etc, and is it good or bad.

Things like the Ferrari F1 4L "fuel cooler"

Nascar teams filling the cage/chassis with wet sand so they meet minimum weight at Scrutineering, then over the course of the race it dries out and falls out the bottom of the car.

Or in Snowy's case, running the R33 gearbox in the 34 at Targa.

I feel that things like filling the car with wet sand is just blatent cheating, but running larger/multiple fuel lines is clever, or running a 5 speed instead of a 6 speed offers no real advantage.

What do you guys think

Link to comment
https://www.sau.com.au/forums/topic/354280-bending-the-rules/
Share on other sites

i love these advances in technology that take a while for other teams to copy. ie:

renaults mass damper in 06

ferraris 'through the nose' hole back 08

ferraris wheel covers and the amazing wheel nuts to allow them

mclarens individual left/right rear brake pedals

mclarens f-duct

also check out smokey yunicks stories here :]

http://www.circletrack.com/ultimateracing/ctrp_0801_smokey_yunick/index.html

I remeber a guy from work who is an F1 nut told me that there was case where a team was found out using a flexible rear wing that had a high angle of attack at low speeds but when it hit higher speeds it flexed down and flattened out to cause less drag.

He also reckons that Micheal Schumacer would never have won so many championships if it wasn't for his team "pushing the envelope" of what was allowed in the rules regarding fuel loading, engine power, traction control etc.

I remember reading about the Gibson motorsport team using a fire extinguisher to cool engine temps as the rules stated you had to carry an onboard extinguisher system.

The rules said nothing about it having to be full at the end of the race.

Another one was Fred Gibson running a larger than standard/homologated intercooler and when the CAMS scrutineer found the item on the race car did not comply, asked him to replace it. As Gibson Motorsport were backed by Nissan then, he had an exact same intercooler (that was still oversize) on stand by wrapped in Nissan packaging. So replaced with this, the scrutineer was satisfied it was a genuine part.

I personally don't agree with "bending" the rules, as there is a fine line between that and cheating. It seems some people try there darndest to justify their cheating by saying it's "bending" the rules and not "breaking" the rules.

I remember reading about the Gibson motorsport team using a fire extinguisher to cool engine temps as the rules stated you had to carry an onboard extinguisher system.

The rules said nothing about it having to be full at the end of the race.

Another one was Fred Gibson running a larger than standard/homologated intercooler and when the CAMS scrutineer found the item on the race car did not comply, asked him to replace it. As Gibson Motorsport were backed by Nissan then, he had an exact same intercooler (that was still oversize) on stand by wrapped in Nissan packaging. So replaced with this, the scrutineer was satisfied it was a genuine part.

I personally don't agree with "bending" the rules, as there is a fine line between that and cheating. It seems some people try there darndest to justify their cheating by saying it's "bending" the rules and not "breaking" the rules.

That reminds me, the 05 Mobil Sierra of Peter Brock was said to have had an extinguisher nozzle pointing at the turbo, was allegedly found by one of DJRs crew chiefs, but by the time the tech inspectors arrived the 05 car was behind a locked garage.

I have no issue with bending of the rules; if you're team is more dedicated to finding loopholes and clever enough to execute it then more power to you!

Porsche were kings of this in the 60's, 70's and 80's.

Breaking the rules (such as the sand trick) is a different story.

That reminds me, the 05 Mobil Sierra of Peter Brock was said to have had an extinguisher nozzle pointing at the turbo, was allegedly found by one of DJRs crew chiefs, but by the time the tech inspectors arrived the 05 car was behind a locked garage.

I can also confirm that a lot of the group A Sierras ran turbos that weren't exactly rule abiding inside....and thats from the guy who worked on them :)

Lets face it, winning motorsport is all about building a car that meets the rules but is magically quicker than everyone elses - if there is no bending the rules, or another way to put it "interpretation of the rules" then most of the team engineers would be out of a job!

Subaru ran a class in the ARC a few years back for 2.5 RS Imprezas, which I was lucky enough to compete in, but as 1 make series which was primarily being run by their marketing dept it was unreal the cheating that was going on! Spec C shells, Cars that were allowed nothing more than a control exhaust blowing flames, and making 100awkw, when ours made 80 at the hubs... (with an illegal STI fuel pump) Cars with 3 open diffs, that would spin the inside rear driving around a car park... Funny thing is that as one of the people who was not doing that and was left looking slow because of it, my frustration was with the Scruitineers etc for not finding it, the guys doing it, well good on them for being that creative.

Brocky's Sierra had the extinguisher pointing at the intercooler during qualifying for Bathurst, and was found, and he was pushed down the grid for it.

Edited by iplen

I remeber a guy from work who is an F1 nut told me that there was case where a team was found out using a flexible rear wing that had a high angle of attack at low speeds but when it hit higher speeds it flexed down and flattened out to cause less drag.

He also reckons that Micheal Schumacer would never have won so many championships if it wasn't for his team "pushing the envelope" of what was allowed in the rules regarding fuel loading, engine power, traction control etc.

Ferrari have a history of "bending" the rules or manipulating people to let them break the rules.

whist yes its cheating and cheating is bad. its only cheating if you get court out.

it would be good to know half the stuff thats done that doesnt get picked up on.

somthings are also good engerneering and can help outher people out. if the engerneers didnt have to think outside the box there would never be any new developments.

One of the local rally guys bought a ex factory ARC Subaru and blew a head gasket. He went to Subaru and got a EJ20 gasket and it didn't fit, so he got another one thinking they'd given him the wrong one... then he got a EJ25 one and it fitted. Turns out the factory subies were running EJ25's stapmed as EJ20's.

Best rumour I've heard is that the group b Lancia Delta S4's were hiding nitrous in the roll cage

I understand they got out of the sport (and assume this was purchased around then?) and know where you're coming from, but I still think that a bit of nouse would be used in case they ever wanted to re-join.

I'm not saying it's completely discountable, but even I went to a lot of effort to sneak out the Hemi V8 in the Targa car prior

to the finish scrutineering. And I'm small fry compared to a factory team!

n836354571_2108060_5322-1.jpg

What's the point of having class rules then? May as well just compete in a "no rules" form of racing.

I have a competitive sailing background and we have one design classes where nothing can be changed from the manufacturer. Think Olympic classes with boats such as Laser, 470 and 49er's.

The idea is to give everyone a level playing field. You should be able to hop from one boat (or car) to another in the same class and the only difference is the driver.

Then there are development classes which virtually have no rules except "must be 12 feet long" for example. This way you get to choose what suits you. If you want to be creative and smart, go the development class. If you want fair/level racing go one design class.

To hear about the cheating in the RS Impreza challenge is absolutely woeful. It breaks all the rules and ideas behind a one make series.

It's a moral and ethical issue for me.

Getting away with it cause you didn't get caught doesn't cut it with me.

Edited by nismoman

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Johnny is sad now... Because you didn't get Bosch Motorsport ABS.  
    • Hey keep the ideas coming, I'm always keen on projects! But, problem fixed!  I got a cheapie ozito scope from Bunnings and had a good look in and around the bearing and sensor hole. I couldn't see a smoking gun but the bearing looked a bit strange, especially when comparing with a new one. I thought the cover had come off the bearing magnets.  Sorry for pics of a screen, I didn't have an SD card.     Good thing I had the old one to inspect. So, given I'm like a pit crew with wheel bearings and luckily I had a spare bearing because I f**ked up my parts order, I decided to just smash it out. Got the old one out in about an hour. So much easier when the parts haven't had a chance to rust together yet. 😂 And, well, found the problem.    In the second pic at about the 8 o'clock position, you'll see what I think is the tip of the old sensor.  The new sensor has definitely been rubbing but it's all intact, just a little shiny so I'm hoping it's fine.  The car brakes perfectly now and no errors.  I think the job took about 2.5h in the end. 👍🏻 I really appreciate the help in here as usual. Thanks guys.
    • I was only looking because I saw some drops on the ground but it wasn't alot. Recently had it serviced will ask the mech to confirm. Find it strange that it looks standard though, can see in another photo of a random box 
    • So...not sure if you know if that has always been there or why you went looking. It could be old damage from a clutch explosion, or even just the gearbox got dropped somewhere along the line. Basically, you should seal it up to stop oil and dust getting into the bellhousing, but it doesn't matter too much and is not structural. I'd suggest something like a glob of JB Weld. BTW what gearbox oil are you running, I would guess the breather has been spewing it everywhere.
    • Hey Duncan thanks for your reply. Sorry mate I know the photos are shit.  Took another photo for reference. Seems the casing does have a hole in it looking on the net, fluid seeping out. Added a photo   
×
×
  • Create New...