Jump to content
SAU Community

Recommended Posts

I've come up with this after the 2011 supercab thread with teams somehow getting an extra few laps from the car without running out of fuel.

So what have you seen/heard on the grapvine/read etc, and is it good or bad.

Things like the Ferrari F1 4L "fuel cooler"

Nascar teams filling the cage/chassis with wet sand so they meet minimum weight at Scrutineering, then over the course of the race it dries out and falls out the bottom of the car.

Or in Snowy's case, running the R33 gearbox in the 34 at Targa.

I feel that things like filling the car with wet sand is just blatent cheating, but running larger/multiple fuel lines is clever, or running a 5 speed instead of a 6 speed offers no real advantage.

What do you guys think

Link to comment
https://www.sau.com.au/forums/topic/354280-bending-the-rules/
Share on other sites

i love these advances in technology that take a while for other teams to copy. ie:

renaults mass damper in 06

ferraris 'through the nose' hole back 08

ferraris wheel covers and the amazing wheel nuts to allow them

mclarens individual left/right rear brake pedals

mclarens f-duct

also check out smokey yunicks stories here :]

http://www.circletrack.com/ultimateracing/ctrp_0801_smokey_yunick/index.html

I remeber a guy from work who is an F1 nut told me that there was case where a team was found out using a flexible rear wing that had a high angle of attack at low speeds but when it hit higher speeds it flexed down and flattened out to cause less drag.

He also reckons that Micheal Schumacer would never have won so many championships if it wasn't for his team "pushing the envelope" of what was allowed in the rules regarding fuel loading, engine power, traction control etc.

I remember reading about the Gibson motorsport team using a fire extinguisher to cool engine temps as the rules stated you had to carry an onboard extinguisher system.

The rules said nothing about it having to be full at the end of the race.

Another one was Fred Gibson running a larger than standard/homologated intercooler and when the CAMS scrutineer found the item on the race car did not comply, asked him to replace it. As Gibson Motorsport were backed by Nissan then, he had an exact same intercooler (that was still oversize) on stand by wrapped in Nissan packaging. So replaced with this, the scrutineer was satisfied it was a genuine part.

I personally don't agree with "bending" the rules, as there is a fine line between that and cheating. It seems some people try there darndest to justify their cheating by saying it's "bending" the rules and not "breaking" the rules.

I remember reading about the Gibson motorsport team using a fire extinguisher to cool engine temps as the rules stated you had to carry an onboard extinguisher system.

The rules said nothing about it having to be full at the end of the race.

Another one was Fred Gibson running a larger than standard/homologated intercooler and when the CAMS scrutineer found the item on the race car did not comply, asked him to replace it. As Gibson Motorsport were backed by Nissan then, he had an exact same intercooler (that was still oversize) on stand by wrapped in Nissan packaging. So replaced with this, the scrutineer was satisfied it was a genuine part.

I personally don't agree with "bending" the rules, as there is a fine line between that and cheating. It seems some people try there darndest to justify their cheating by saying it's "bending" the rules and not "breaking" the rules.

That reminds me, the 05 Mobil Sierra of Peter Brock was said to have had an extinguisher nozzle pointing at the turbo, was allegedly found by one of DJRs crew chiefs, but by the time the tech inspectors arrived the 05 car was behind a locked garage.

I have no issue with bending of the rules; if you're team is more dedicated to finding loopholes and clever enough to execute it then more power to you!

Porsche were kings of this in the 60's, 70's and 80's.

Breaking the rules (such as the sand trick) is a different story.

That reminds me, the 05 Mobil Sierra of Peter Brock was said to have had an extinguisher nozzle pointing at the turbo, was allegedly found by one of DJRs crew chiefs, but by the time the tech inspectors arrived the 05 car was behind a locked garage.

I can also confirm that a lot of the group A Sierras ran turbos that weren't exactly rule abiding inside....and thats from the guy who worked on them :)

Lets face it, winning motorsport is all about building a car that meets the rules but is magically quicker than everyone elses - if there is no bending the rules, or another way to put it "interpretation of the rules" then most of the team engineers would be out of a job!

Subaru ran a class in the ARC a few years back for 2.5 RS Imprezas, which I was lucky enough to compete in, but as 1 make series which was primarily being run by their marketing dept it was unreal the cheating that was going on! Spec C shells, Cars that were allowed nothing more than a control exhaust blowing flames, and making 100awkw, when ours made 80 at the hubs... (with an illegal STI fuel pump) Cars with 3 open diffs, that would spin the inside rear driving around a car park... Funny thing is that as one of the people who was not doing that and was left looking slow because of it, my frustration was with the Scruitineers etc for not finding it, the guys doing it, well good on them for being that creative.

Brocky's Sierra had the extinguisher pointing at the intercooler during qualifying for Bathurst, and was found, and he was pushed down the grid for it.

Edited by iplen

I remeber a guy from work who is an F1 nut told me that there was case where a team was found out using a flexible rear wing that had a high angle of attack at low speeds but when it hit higher speeds it flexed down and flattened out to cause less drag.

He also reckons that Micheal Schumacer would never have won so many championships if it wasn't for his team "pushing the envelope" of what was allowed in the rules regarding fuel loading, engine power, traction control etc.

Ferrari have a history of "bending" the rules or manipulating people to let them break the rules.

whist yes its cheating and cheating is bad. its only cheating if you get court out.

it would be good to know half the stuff thats done that doesnt get picked up on.

somthings are also good engerneering and can help outher people out. if the engerneers didnt have to think outside the box there would never be any new developments.

One of the local rally guys bought a ex factory ARC Subaru and blew a head gasket. He went to Subaru and got a EJ20 gasket and it didn't fit, so he got another one thinking they'd given him the wrong one... then he got a EJ25 one and it fitted. Turns out the factory subies were running EJ25's stapmed as EJ20's.

Best rumour I've heard is that the group b Lancia Delta S4's were hiding nitrous in the roll cage

I understand they got out of the sport (and assume this was purchased around then?) and know where you're coming from, but I still think that a bit of nouse would be used in case they ever wanted to re-join.

I'm not saying it's completely discountable, but even I went to a lot of effort to sneak out the Hemi V8 in the Targa car prior

to the finish scrutineering. And I'm small fry compared to a factory team!

n836354571_2108060_5322-1.jpg

What's the point of having class rules then? May as well just compete in a "no rules" form of racing.

I have a competitive sailing background and we have one design classes where nothing can be changed from the manufacturer. Think Olympic classes with boats such as Laser, 470 and 49er's.

The idea is to give everyone a level playing field. You should be able to hop from one boat (or car) to another in the same class and the only difference is the driver.

Then there are development classes which virtually have no rules except "must be 12 feet long" for example. This way you get to choose what suits you. If you want to be creative and smart, go the development class. If you want fair/level racing go one design class.

To hear about the cheating in the RS Impreza challenge is absolutely woeful. It breaks all the rules and ideas behind a one make series.

It's a moral and ethical issue for me.

Getting away with it cause you didn't get caught doesn't cut it with me.

Edited by nismoman

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • For DBA, check out their guide table here. https://dba.com.au/wp-content/uploads/2023/01/Direct_Replacement-Guide-2021.2.pdf   Additionally they have some other guides and info on how to make sure you choose the right pad.
    • Sorry, just assumed that talk of coloured pads meant EBC red/green/yellow/shit stuff. I don't know the DBA pads, but it's a reasonable bet that they will be OK. DBA make good stuff generally. Those 4000 series rotors I linked to are very good. I may well replace the RDA rotors I have with those when required.
    • The average previous owner for these cars were basically S-chassis owners in the US. Teenagers or teenager-adjacent. I often tell people that neglect is easier to fix than something that was actively "repaired" by previous owners.
    • Update 3: Hi all It's been a while. Quite a lot of things happened in the meantime, among other things the car is (almost) back together and ready to be started again. Things that I fixed or changed: Full turbo removal, fitting back the OEM turbo oil hardlines. Had to do quite a bit of research and parts shopping to get every last piece that I need and make it work with the GT2860 turbos, but it does work and is not hard to do. Proves that the previous owner(s) just did not want to. While I was there I set the preload for the wastegates to 0,9bar to hopefully make it easier for the tuner to hit the 370hp I need for the legal inspections that will follow later on. Boost can always go up if necessary. Fitted a AN10 line from the catch can to the intake hose to make the catchcan and hopefully the cam covers a slight vacuum to have less restrictive oil returns from the head and not have mud build up as harshly in the lines and catch can. Removed the entire front interior just shy of the dashboard itself to clean up some of the absolutely horrendous wiring, (hopefully) fix the bumpy tacho and put in LED bulbs while I was there. Also put in bulbs where there was none before, like the airbag one. I also used that chance to remove the LED rpm gauge on the steering column, which was also wired in absolute horror show fashion. Moved the 4in1 Prosport gauge from sitting in front of the OEM oil pressure gauge to the center console vents, I used a 3D printed vent piece to hold that gauge there. The HKB steering wheel boss was likely on incorrectly as I sometimes noticed the indicator reset being uneven for left vs. right. In the meantime also installed an airbag delete resistor, as one should. Installed Cube Speed premium short shifter. Feels pretty nice, hope it'll work great too when I actually get to drive. Also put on a fancy Dragon Ball shift knob, cause why not. My buddy was kind enough to weld the rust hole in the back, it was basically rusted through in the lowermost corner of the passenger side trunk area where the wheel arch, trunk panel and rear quarter all meet. Obviously there is still a lot of crustiness in various areas but as long as it's not rusted out I'll just treat and isolate the corrosion and pretend it's not there. Also had to put down a new ground wire for the rear subframe as the original one was BARELY there. Probably a bit controversial depending on who you ask about this... but I ended up just covering the crack in the side of the engine block, the one above the oil feed, with JB Weld. I used a generous amount and roughed up the whole area with a Dremel before, so I hope this will hold the coolant where it should be for the foreseeable future. Did a cam cover gasket job as the half moons were a bit leaky, and there too one could see the people who worked on this car before me were absolute tools. The same half moons were probably used like 3 times without even cleaning the old RTV off. Dremeled out the inside of the flange where the turbine housing mates onto the exhaust manifolds so the diameter matches, as the OEM exhaust manifolds are even narrower than the turbine housings as we all know. Even if this doesn't do much, I had them out anyways, so can't harm. Ideally one would port-match both the turbo and the manifold to the gasket size but I really didn't feel up to disassembling the turbine housings. Wrapped turbo outlet dumps in heat wrap band. Will do the frontpipe again as well as now the oil leak which promted me to tear apart half the engine in the first place is hopefully fixed. Fitted an ATI super damper to get rid of the worn old harmonic balancer. Surely one of the easiest and most worth to do mods. But torquing that ARP bolt to spec was a bitch without being able to lock the flywheel. Did some minor adjustments in the ECU tables to change some things I didn't like, like the launch control that was ALWAYS active. Treated rusty spots and surface corrosion on places I could get to and on many spots under the car, not pretty or ideal but good enough for now. Removed the N1 rear spats and the carbon surrounding for the tailpipe to put them back on with new adhesive as the old one was lifting in many spots, not pretty. Took out the passenger rear lamp housing... what do you know. Amateur work screwed me again here as they were glued in hard and removing it took a lot of force, so I broke one of the housing bolts off. And when removing the adhesive from the chassis the paint came right off too. Thankfully all the damaged area won't be visible later, but whoever did the very limited bodywork on this car needs to have their limbs chopped off piece by piece.   Quite a list if I do say so myself, but a lot of time was spent just discovering new shit that is wrong with the car and finding a solution or parts to fix it. My last problem that I now have the headache of dealing with is that the exhaust studs on the turbo outlets are M10x1.25 threaded, but the previous owner already put on regular M10 nuts so the threads are... weird. I only found this out the hard way. So now I will just try if I can in any way fit the front pipe regardless, if not I'll have to redo the studs with the turbos installed. Lesson learned for the future: Redo ALL studs you put your hands on, especially if they are old and the previous owners were inept maniacs. Thanks for reading if you did, will update when the engine runs again. Hope nothing breaks or leaks and I can do a test drive.
×
×
  • Create New...