Jump to content
SAU Community

Recommended Posts

Wow Kory those Photos look great.

Just a reminder folks, you can still buy the club DVD. The photographers take photos of all the cars so you'll still get pics of your car! PM me if you want in.

Just stick the radical out with Ben in the Nascup and my R100 Sports Sedan. Brother was also considering bringing the PRB down. We can have the track to our self's and get a clear run. Only cars under 800kg can apply LOL

i have a mate who is considering bringing his PBR Clubman (1.9ltr 20v) to the next one two, so the way its going we'll have a group full of them, bring on the radical, i've being waiting to see i of this going.

had a ball all day and can't wait for the next one

F stands for f**ked if I know. I was in that one. I can see Street, Club and Open in the rules: http://www.island.ne...nal%20draft.doc

Congrats on your time today, you were damn quick and I wish I could catch you lol

I'll have to chase up what the go with the F is. It looks like putting the points together is going to be a manual process and I believe we have a spreadsheet with each of the entrants and what class they were in. I'll try to get that sorted out in the next few days.

Maybe someone can help me. I had my car tuned by yavuz, Now on the way to wakie we had a few problems.

1: Car knocked 61 in 5th gear going from 100-120...

2: Car knocked 91 with air con on, going from 100-120 in 5th.

My cars running 10 PSI with standard turbo with a walbro fuel pump stock injectors normal AFM, and the supporting mods.

So i went to the BP filled up 98 like i always do and this time i put a bottle of nulon booster. After this no problems what so ever at wakie i was redlining it and no issues. Any ideas guys? Its got me a little worried it seems when the booster runs out of the system it starts to nock up to 25 sometimes in 2nd 3rd and 4rth should i take it to yavuz again?

Sid :D

I dunno man i dont fill anything other then BP or if i have to always a big name like shell or caltex or mobile, and always 98 never touched 95 :S. Its wierd it did it before yavuz tuned it so its not his tune i know that for sure but still i dont want to have to keep filling bottles or booster every time its out of the system :S.

Sid

So you could take it for a long drive, get the fuel as low as you dare, take it really easy though dont get the rpm high and dont use too much throttle. Best place to do this is to get on the highway and just cruise at 100kmh or so. Go until the light comes on to refill, refill with straight 98 no booster, then see if it does it again.

Try and do it so that you turn around and head home halfway through the tank so you're not ages away from home by the time its done. Not sure if that makes sense how i worded it

Maybe someone can help me. I had my car tuned by yavuz, Now on the way to wakie we had a few problems.

1: Car knocked 61 in 5th gear going from 100-120...

2: Car knocked 91 with air con on, going from 100-120 in 5th.

My cars running 10 PSI with standard turbo with a walbro fuel pump stock injectors normal AFM, and the supporting mods.

So i went to the BP filled up 98 like i always do and this time i put a bottle of nulon booster. After this no problems what so ever at wakie i was redlining it and no issues. Any ideas guys? Its got me a little worried it seems when the booster runs out of the system it starts to nock up to 25 sometimes in 2nd 3rd and 4rth should i take it to yavuz again?

Sid :D

my vote goes to bad batch of fuel, im guessing your using a PFC?

hense the reason you no the knock number. You should have told Jez his car was parked next to ya in the pits, he had all his tuning gear with him, could have jumped in on of the passenger laps with you and takin some timing out of the knocky spots.

Deano : D

DAM!! i didnt know that LOL... the problem is when the Octaine Booster is inside its perfect. When it isnt god it hates me it will stay pretty low most of the time 25 or so but once your in 5th gear itll hate you lol. Ive been reading some disturbing stuff about knock being signs of dead engines? :S:S... Yavuz said its a clean good engine so thats the only thing keeping me sane atm..

Sid

Here's a few photos from the day that i got. If you bought the DVD i'm sure you'll be happy!

1

5502413072_859afbc78d_b.jpg

5

5501821739_8fd55a9ee0_b.jpg

6

5501821481_2da56de5b8_b.jpg

7

5501820813_67f8348192_b.jpg

love your work Kory, the action shots are awsome, i might have to actually buy the dvd

its to bad that renew had to use a piston engine to take the win :whistling:

i might have to actually buy the dvd

its to bad that renew had to use a piston engine to take the win :whistling:

Buy it, it's always worth it.

IMHO they did not win, apart from the obvious, a rotary was not placed first, and I have no idea about the final official point standing. However during interclub competitions (at the club level, ie SAU or RENEWE only) a scoring method similar to below is often used.

Based on the best times of everybody, last place gets 1 point, 2nd last gets 2 points, 3rd last gets 3 points etc.

RENEW = 390 points

SAUNSW = 645 points

I'm a management accountant, just tell me what you want the numbers to say and I'll make them say it :P

Duncan - where you in HGE GTR?

thats a PB yeah!?

yeah mate, it was and by a long way, about 1 sec :D I guess the new track is quicker and those tyres are great.

DAM!! i didnt know that LOL... the problem is when the Octaine Booster is inside its perfect. When it isnt god it hates me it will stay pretty low most of the time 25 or so but once your in 5th gear itll hate you lol. Ive been reading some disturbing stuff about knock being signs of dead engines? :S:S... Yavuz said its a clean good engine so thats the only thing keeping me sane atm..

Sid

sid....put your bloody name in your profile or I will call you speedwhore for ever!

Almost certainly just a bad batch of fuel, even so I would get yavuz to take a little timing out of the midrange for safety. Octane booster does very little....each bottle is 0.1 of an octane rating, so 1 bottle in a tank of 98 only gives you 98.1.....

Buy it, it's always worth it.

IMHO they did not win, apart from the obvious, a rotary was not placed first, and I have no idea about the final official point standing. However during interclub competitions (at the club level, ie SAU or RENEWE only) a scoring method similar to below is often used.

Based on the best times of everybody, last place gets 1 point, 2nd last gets 2 points, 3rd last gets 3 points etc.

RENEW = 390 points

SAUNSW = 645 points

I'm a management accountant, just tell me what you want the numbers to say and I'll make them say it :P

The numbers arent quite like that but I'm sure SAU took club bragging rights for the day. The turnout of skylines was stronger than the rotor turn out and we gave a few extra spots to SAU. I think next time will have a better balance though.

edit: when i get the figures i'll try to put together and overall point score for each club and one with just skylines and rotors just for interests sake.

Edited by gregor

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • (it is a brand new ported mellings pump) I suspect the lack of pressure is due to the leak. It was *not* that low in other logs of oil pressure in the past. It wasn't that hot either, but not far off.
    • Would a Mellings oil pump be a viable option  From my time with a LS, and talking to tuners and LS specialists, the "weak" OEM oil pump is one of the first things they recommend to swap out if I was going to give the engine any high RPM I opted for a Mellings high volume, with the high pressure springs and I never had a issue with it Cost wise they are not expensive in the scheme of things 
    • Just bought a 2002 Stagea 250tRS VR-X Four AERO VQ25DET and spent the last two weekends cleaning and detailing it.. still have to do the wheels and the engine bay but the rest of it came up nice. Imported 2011 to S.A. and I'm the third owner since it was imported. I met the guy who brought it over, he went to Japan and picked out the car, bought it and ordered the wheels. He also gave me a list of stuff he did to the car with receipts. Coil overs (I have the original springs), 3" exhaust from the dump pipe back no cat, Custom dump pipe,(I have the original exhaust), Plenum spacer, 18" custom Work XSA wheels (need restoring, I've made a start..), Shift kit put through the 5 speed tiptronic auto, TV and menus/screens changed to english, Australian DTV tuner installed in rear. I've just had four new discs and new pads as well as all the fluids including the brake fluid replaced. I have all the receipts for the last 15 years and the import papers in a nice folder. Car looks great, goes like hell but fuel economy is not a thing lol.. pics next..
    • I ended up in this rut again lol, and used a shit ton of filler. One thing I can't understand is, even after using a big long block and going in long X pattern strokes, I always end up at bare metal again with no filler, and my repair started at one end of the door and now I've chased my tail to almost the other end of the door. I was thinking of hitting the panel with a hammer where it might be a high spot and making everything low then filling it, I did this on a small section on my other door by mistake and I think I fixed it lol. Is this a bad idea? The other thing is with guidecoat, whether it's the powder or spray, after I sand all the guide coat off, it doesn't reveal anything for me in terms of high spots and low spots and makes it especially hard when it's bare metal (at least in powdered form), am I doing something wrong here, or likely a high spot I keep going over and creating valleys? Lastly, stupid question but, is it possible that after sanding if I only sand over the filler area where I know to be a dent that it's impossible for me to dig into that dent? Unless there are other problems which I missed.  
×
×
  • Create New...