Jump to content
SAU Community

Recommended Posts

yeah mate, it was and by a long way, about 1 sec :D I guess the new track is quicker and those tyres are great.

sid....put your bloody name in your profile or I will call you speedwhore for ever!

Almost certainly just a bad batch of fuel, even so I would get yavuz to take a little timing out of the midrange for safety. Octane booster does very little....each bottle is 0.1 of an octane rating, so 1 bottle in a tank of 98 only gives you 98.1.....

But i dont know HOW TO :(.... WILL SOMEONE THINK OF THE CHILDREN!!!!!! :P, Although duncan you love my name you know it, you think im cool loll

SID

Sid dont get too worried about the pfc knock, it doesnt mean the motor is dead at all, get yavuz to have a play with it or come for a drive to the central coast and ill go for a run with you on the freeway and fix it up for you, 5th gear is very high load on the engine thats why it knocks in that gear only, you wouldbe better off tuning it with NO octane booster at all, so run the tank 2 or 3 times with no booster and change the plugs before you get your touch up tune.

a pfc knock of 50 and above is normally close to real knock, but this depends on the condition of the knock sensors.

Buy it, it's always worth it.

IMHO they did not win, apart from the obvious, a rotary was not placed first, and I have no idea about the final official point standing. However during interclub competitions (at the club level, ie SAU or RENEWE only) a scoring method similar to below is often used.

Based on the best times of everybody, last place gets 1 point, 2nd last gets 2 points, 3rd last gets 3 points etc.

RENEW = 390 points

SAUNSW = 645 points

I'm a management accountant, just tell me what you want the numbers to say and I'll make them say it :P

yeah i realise this i was just sh1t stirring the fact there fastest club member was a piston powered car considering its a rotory forum? :nyaanyaa:

1, evo 2, gtr 3, gtr 4, rx7 5, rx7, yeah i'm gonna say the gtrs have it over the rx7s this round.

as for the car classes, i would be interested to see how the classes are set and why my full street R34 GTR is in the same class as duncans race R32 GTR? if F means not involved then someone needs to change my class as i have said right from the start i wanted to put of the comp,

Sid dont get too worried about the pfc knock, it doesnt mean the motor is dead at all, get yavuz to have a play with it or come for a drive to the central coast and ill go for a run with you on the freeway and fix it up for you, 5th gear is very high load on the engine thats why it knocks in that gear only, you wouldbe better off tuning it with NO octane booster at all, so run the tank 2 or 3 times with no booster and change the plugs before you get your touch up tune.

a pfc knock of 50 and above is normally close to real knock, but this depends on the condition of the knock sensors.

Ya ill see how it goes :). Central coast :O loll ill try with yavuz if not then ill give you a PM ehehe a good LONG drive. Thanks bud

Sid

Hi folks. Thanks for respecting Nick's instructions on discussing "THE INCIDENT".

For those that know or don't I've posted my whole story to date in this thread.

I know I've had a lot of people PM'ing me about it so I wanted to make sure I could provide as much of the facts as possible to folks. If you want to discuss it please keep your posts in that other thread and keep it positive folks. Even though I'm still a bit emotional over the event, I know the only way out to NORTH is to stay true, optimistic and open to opportunities.

For those that also wonder 'bout my shoulder - hurt like a mo-f this morn, but has gotten better as the day wore on today.

or maybe hunting the silvia spurred you on ;)

That Silvia was FAST, never seen one that could travel fast in a stright line before. Kudos to the pilot. It must of had some serious mods, handeled very well and pulled on the straights better then my GTR.

yeah i realise this i was just sh1t stirring the fact there fastest club member was a piston powered car considering its a rotory forum? :nyaanyaa:

1, evo 2, gtr 3, gtr 4, rx7 5, rx7, yeah i'm gonna say the gtrs have it over the rx7s this round.

as for the car classes, i would be interested to see how the classes are set and why my full street R34 GTR is in the same class as duncans race R32 GTR? if F means not involved then someone needs to change my class as i have said right from the start i wanted to put of the comp,

Relax dude it'll be sweet. We will manually assign the classes and match them up with round times and announce the points. If I need to I'll contact individual owners to see where exactly their car fits if there is any doubt. I'm not sure what happened with the timing people assigning class but we'll try to get it sorted for next time.

Relax dude it'll be sweet. We will manually assign the classes and match them up with round times and announce the points. If I need to I'll contact individual owners to see where exactly their car fits if there is any doubt. I'm not sure what happened with the timing people assigning class but we'll try to get it sorted for next time.

Having timing at SAU days now is a big bonus, friendly competition with another club, all good.

dnissi is fast as it has Unique Auto Sports stickers, he he. He is a good driver and well set up car.

XKLABA time to get sorted and go faster?

Having timing at SAU days now is a big bonus, friendly competition with another club, all good.

dnissi is fast as it has Unique Auto Sports stickers, he he. He is a good driver and well set up car.

XKLABA time to get sorted and go faster?

Yeah mate a bit of camber and some better boost response and i reckon i could shave about 2 secs off my time, we'll see at the next one

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • My guesstimate, with no real numbers to back it up, is it won't effect it greatly at all.its not a huge change in position, and I can't see the air flow changing from in turbulence that much based on distance, and what's in front of it. Johnny and Brad may have some more numbers to share from experience though.
    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
    • Pull codes via the self-diagnosis procedure. As far as I can tell this is just a sign of transmission issues but not a code unto itself.
×
×
  • Create New...