Jump to content
SAU Community

Lambchop With A Renault Axis Here...


WAGON_BOY
 Share

Recommended Posts

the oil pan cover scrubbed out a few time but :whistling: gotta check the exhaust too hopefully that was safe!

was probably the cross member, it sits lower than most of the car......

Link to comment
Share on other sites

Got the brakes machined today.......... feels so much better!!!

also its first oil and filter change and done the sparkies just for good measure.

only thing im waiting for now is my new rocker cover gasket cos its leaking like a sieve,

otherwise its all good :D

Link to comment
Share on other sites

came across this and was wondering if anyone knew any more info on finding a guage holder that mounts in that exact possition where the TV unit goes...........

was hoping to hold 3X 2" 1/16 guages............

cheers :)

post-83704-0-17997800-1311679880_thumb.jpg

Link to comment
Share on other sites

came across this and was wondering if anyone knew any more info on finding a guage holder that mounts in that exact possition where the TV unit goes...........

was hoping to hold 3X 2" 1/16 guages............

cheers :)

That's got to be custom.

I reckon you could roll a piece of sheet metal to fit there and mould some gauge cups in fairly easily.

Link to comment
Share on other sites

came across this and was wondering if anyone knew any more info on finding a guage holder that mounts in that exact possition where the TV unit goes...........

was hoping to hold 3X 2" 1/16 guages............

cheers :)

start searching around the G35 forums.......are the defi gauges? If so there website my have that mount to suit.

Link to comment
Share on other sites

ok im going to build myself a custom guage holder to fit 3 guages, ive already got boost and am wondering what the other 2 should be......

im thinking oil pressure and .................???..................... (water temp is already on the standard cluster so not sure if i really need that one)

other choices are oil temp, trans temp and air/fuel ratio..................... (have i missed any?)

or if the others arent to important i'll just make a 2 guage holder instead!!!

Link to comment
Share on other sites

ok im going to build myself a custom guage holder to fit 3 guages, ive already got boost and am wondering what the other 2 should be......

im thinking oil pressure and .................???..................... (water temp is already on the standard cluster so not sure if i really need that one)

other choices are oil temp, trans temp and air/fuel ratio..................... (have i missed any?)

or if the others arent to important i'll just make a 2 guage holder instead!!!

EGT and Trans temp would be my choices along with Boost.

Link to comment
Share on other sites

ok im going to build myself a custom guage holder to fit 3 guages, ive already got boost and am wondering what the other 2 should be......

im thinking oil pressure and .................???..................... (water temp is already on the standard cluster so not sure if i really need that one)

other choices are oil temp, trans temp and air/fuel ratio..................... (have i missed any?)

or if the others arent to important i'll just make a 2 guage holder instead!!!

where are you gonna put it. i might be interested in a 2 gauge holder with some$$ wanna make mine abit neater

Link to comment
Share on other sites

EGT and Trans temp would be my choices along with Boost.

yeah oil temp and trans would be alright.

Exhaust Gas Temp................. why do u say that ?

where are you gonna put it. i might be interested in a 2 gauge holder with some$$ wanna make mine abit neater

i've pulled out the box where the tv goes seeing as i dont have one.

will be sorta like this..........

post-83704-0-36807200-1312194280_thumb.jpg

Link to comment
Share on other sites

yeah oil temp and trans would be alright.

Exhaust Gas Temp................. why do u say that ?

EGT is very useful for a number of reasons.

1) In general driving you start to see how the ECU manages fuel and helps understand the whole car. ie, on the open road car leans right out and EGT is up around 600-700 degrees.

2) If you start (I think you already have) moding the car and the various components you can see the direct change you have made and in particular the change it makes to fueling which is very important to avoid leaning the motor.

I am sure there is more than this ... :)

Link to comment
Share on other sites

EGT is very useful for a number of reasons.

1) In general driving you start to see how the ECU manages fuel and helps understand the whole car. ie, on the open road car leans right out and EGT is up around 600-700 degrees.

2) If you start (I think you already have) moding the car and the various components you can see the direct change you have made and in particular the change it makes to fueling which is very important to avoid leaning the motor.

I am sure there is more than this ... :)

How does EGT compare to AFR? reading wise...is one more accurate than the other?

Link to comment
Share on other sites

How does EGT compare to AFR? reading wise...is one more accurate than the other?

I would think the AFR is a lot more accurate and if the device measuring is accurate enough will give you a much better result but I would imagine a very different cost.

Probably better than the EGT is the Wide band O2 sensor. Fester and more accurate and able to use for on road tuning.

Link to comment
Share on other sites

yep make me one.

my TV is out of order as my emanage took over the dvd players spot.

pending price obviously

Myself and a panel beater mate are gonna try and put these into production, i'll make both dual and tripple guage holders............. fingers crossed!!!

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share




  • Similar Content

  • Latest Posts

    • Go to SP mufflers and get the muffler of size you want and make a nice mid muffler. It's about that simple! I have 2x 3.5 Magnaflow straight through Mufflers and while it's pretty loud with the Varex open, it's quiet enough with the Varex closed. You can also buy off the shelf Magnaflow straight through mufflers as well. You also have a turbo to quiet the car down too. Don't overthink it. Buy my extra Magnaflow muffler sitting on a shelf doing nothing (buy it new, ignore this part)
    • Centre-offset muffler under the floor, same as stock. Just....3.5". The change from straight pipe there to centre-offset will mean that you need to remake some of the pipe (add a bend or two).
    • Hey guys. So my R34 GTT has a custom 3.5” exhaust (done by previous owner) with a high flowing cat, and then just a Varex cannon muffler on the back. The car does drone alot and is really loud even on highway driving just cruising, as you can imagine due to the Varex muffler basically being a straight through with the valve open. As much as i love a loud RB, it can be a bit much with no other muffling in line and just driving casually. I wanted to lower the volume output on the exhaust a bit, as well as remove the drone (probably a way to do both at once), and was going to do it all myself as I am a fabricator and have done exhaust work in the past, so the fab work isnt my issue, im just not sure on the right product or type of product to use to get the job done, and i doubt an exhaust shop would be wanting to help me as they wont be making any money from helping me, unless they supplied the product? Anyway any help or guidance in best way to approach this would be awesome   Thanks in advance
    • Meh, whilst the Honda is a "really" good car and has potential if you want to drop coin on, it was uninspiring for me to look at, but, it did serve its purpose and is now in the boys hands, his happy, his girl is happy, as she wasn't to keen on the noisy old Patrol, and most importantly, the Minister for War and Finances is extremely happy that her "little baby boy" (6'2 nugget who is currently training to be a copper, which will make 3 coppers in the immediate "circle of trust") has a well sorted reliable car that doesn't guzzle diesel Me, I'm more than happy with the NC MX5 that I replaced it with, it's a fun little car that I like looking at, like driving, and yes..... I do like the fact that the maintenance and modifications that I have done/will do are plentiful and relatively cheap, well........ while staying naturally aspirated slow that is, and that's all I really need for a fun little daily, I can rev the 5hit out of it rowing through the gears and never really break the speed limit  In saying that wicked word, "modifications", I've already ordered something for some noise and an additional "3 ish" horse powers, or whatever it gives, in the form of a header, and, a new set of "cheapo" BC coilovers that are already sitting in the shed waiting to get put in, I had the same BC's in my old NB and found they were fine for the street, hwy, and the occasional track days I did in it, they have 6kg front and 4kg rear springs which is about 10% stiffer than the stock springs which I found worked well for their price  I've also already been in touch with MX5 Mania in Dural, so once the header is on it will get a ECUTek RaceROM tune there (I cannot rev match for 5hit, and I loved the RaceROM rev match and FFS in my old 86 "RIP") In other, maintenance news, I put some new sparkler plugs in it, and have a new set of DBA Street series pads to put in over the next day or so, I'm running the DBA street series in the SS and Honda and really like them, they work great and are not dusty at all I've also booked in a few days leave over this weekend to give me 4 days weekend do some paint correction and give the leather seats some conditioning and interior some Bissell and steam cleaning OCD lovin', the carpet and interior looks clean, but from my experience with the Bissell IRT carpet, and the steam cleaner IRT trim, looks can be deceiving I've also found that finding a detachable hard top is proving problematic, the main reason why I didn't like the NC initially was the power retractable hard top that I seen them with gave the roof line a weird look, the detachable roof though looks good, and is a same shape as a NA/NB hard top, similar, but unfortunately not the same as it has different fixture point on the front, so fitting a easy to get NA/NB detachable hard top is no bueno New Old cars are fun, cleaning, hunting and playing around brings much joy How are your beasties going? Do you still have the Skyline with the LS???, or Barra??? that you were playing with
×
×
  • Create New...