Jump to content
SAU Community

Recommended Posts

  • 8 months later...

What problems you have with windows 7?

I tried to load FAST from a disc but can't get it to work. I have been told that it will work on XP and I should run a version of XP within my Windows 7 but that's a bit beyond my computer expertise so I have left it for now!
  • 3 months later...
  • 4 months later...

Here is what I did and this works in windows 64 bit systems so no messing around with virtual windows setup which is a pain in the ass.

NISSAN FAST 2010 and A1, A2, A3, B1, B2 CDs
This will install on 32-bit and 64-bit systems.


http://depositfiles.com/files/c3dqowelq

(this will be approx. 1GB in size)

Instructions

  • Open the NISSAN_FAST_2010_A1_A2_A3_B1_B2.zip file.
  • Extract/Drag the 'NISSAN' folder to your local disk (E.g. C:\ drive).
  • Navigate to 'C:\NISSAN\FASTPRG\WIN2000\SETUP' and open 'SETUP.EXE'.
  • Click 'Next' a few times and complete the setup.
  • Navigate to 'C:\NISSAN' and open 'Nfset'.
  • Select the 'CD-ROM SETUP' tab and add all CDs from 'C:\NISSAN\CD' (A1, A2, A3, B1, B2) by selecting 'Browse' for each drive number.
  • This step is not necessary. In 'Control Panel' open your 'Fonts' folder. Click on 'Font Settings' and make sure 'Hide fonts based on language settings' is unchecked. While in Nfset, click on the 'ALL' tab and select 'MS Gothic' as the font and script to Japanese
  • Now open 'Nissan Menu' from the Start menu.

Hopefully I've explained this as easy as possible and didn't miss any steps.

Cheers,

Ants

  • Like 1
  • 3 months later...

Here is what I did and this works in windows 64 bit systems so no messing around with virtual windows setup which is a pain in the ass.

NISSAN FAST 2010 and A1, A2, A3, B1, B2 CDs

This will install on 32-bit and 64-bit systems.

http://depositfiles.com/files/c3dqowelq

(this will be approx. 1GB in size)

Instructions

  • Open the NISSAN_FAST_2010_A1_A2_A3_B1_B2.zip file.
  • Extract/Drag the 'NISSAN' folder to your local disk (E.g. C:\ drive).
  • Navigate to 'C:\NISSAN\FASTPRG\WIN2000\SETUP' and open 'SETUP.EXE'.
  • Click 'Next' a few times and complete the setup.
  • Navigate to 'C:\NISSAN' and open 'Nfset'.
  • Select the 'CD-ROM SETUP' tab and add all CDs from 'C:\NISSAN\CD' (A1, A2, A3, B1, B2) by selecting 'Browse' for each drive number.
  • This step is not necessary. In 'Control Panel' open your 'Fonts' folder. Click on 'Font Settings' and make sure 'Hide fonts based on language settings' is unchecked. While in Nfset, click on the 'ALL' tab and select 'MS Gothic' as the font and script to Japanese
  • Now open 'Nissan Menu' from the Start menu.

Hopefully I've explained this as easy as possible and didn't miss any steps.

Cheers,

Ants

this works a treat........now gotta learn how to play......not sure what step 7 is meant to do though?

this works a treat........now gotta learn how to play......not sure what step 7 is meant to do though?

step 7 is only to convert the Japanese text into readable English text.

Thanks Ants

No probs.

  • 3 months later...

Just for everyone's information, the link works fine, however you need to just be sure you click on the appropriate download field which is labelled 'Download File in regular mode by browser' (this is the slower connection)

It also works without any issues on Windows 8.1 because I just installed myself :)

If anyone has any queries just let me know.

Cheers,

Ants

  • 3 weeks later...

Just out of curiosity. Does the above version have all the gearbox illustrations for R33 gtst? My files dont have this for my car, they are just blank pages that say something about not available

If they work I'll use the above link and swap out my a1.a2 etc files :)

Just out of curiosity. Does the above version have all the gearbox illustrations for R33 gtst? My files dont have this for my car, they are just blank pages that say something about not available

If they work I'll use the above link and swap out my a1.a2 etc files :)

the answer to that question is....................

yes it does mate :)

the answer to that question is....................

yes it does mate :)

slave cylinder and manual transmission illustrations come up with "illustrations cannot be found"

? :S

Do I have a strange VIN or something lol. Anyone got a 33 and been able to look at manual trans illustrations?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Thanks mate, couldn't find in VIC, ended up ordering one from NSW, getting rwc to get new plates and registration done.
    • Before all the EFR fan boys come in, have a look at: https://www.garrettmotion.com/racing-and-performance/performance-catalog/turbo/g-series-ii-g30-825-58mm/ It also comes in a T4 1.06 divided housing. I would dare say if you want response & also decent power, this thing would chop.   AND apologies, just re-read your post, you've already bought the turbo... whatever you do, make sure you stick with divided housing and proper twin scroll manifold.
    • People have got to stop doing that. ShatGPT is not a search engine. It is a hallucination factory.   I also would recommend the 1.05. The .83 will "work" for you , in that it will be more responsive, but I think you'll find that it won't be anywhere near as good running it out to 8000rpm as the big housing will be.
    • Decided for the first time ever I would tow my car TO the track day on the same working theory as bringing tools and spares "if I have it I wont need it, but if I leave it behind i will 100% need it" all setup and ready to go out and try these A050 for the first time First session showed I needed to stiffen up the dampers a touch but still managed a few 1:21's without much effort. things were looking good. Came in a dropped the tyres down  to 26/28 as they had gotten to 35/33C from 22C cold The first lap of session two I managed to drop into 1:20's. Then in the second lap into the second session. Coming into T3 and I suddenly lost brake pedal followed by some huge rear end vibrations and scraping sounds. Got it back into the pits after session ended and found this. in the attached video, all of the wobble is in the hub its self, wheel is mint, and bearing feels tight. lKXLqpd - Imgur.mp4   Deciding it was a bent spindle I tried to find bearing/hub assembly locally but was unsuccessful so it was loaded back onto the trailer i luckily brought it on to drag it back home  
    • 1.05 you’ve gotta let it breath 
×
×
  • Create New...