Jump to content
SAU Community

Recommended Posts

marko marko

ill send you a little link with guys running one 044 in tank and making 400kw + and not one or two cars a fair few,

Edited by WARLORD

Here it is from my workshop manual

its got its own little pump & interestingly enough, the core is an Earls item (well, it is an ADM GTR so what would u expect as these were fitted locally before sold)

post-8728-0-72251400-1363468652_thumb.jpg

Edited by Marko R1

Ah, transfer case cooler. I have never seen one of those before, I can't remember if the Gibson cars ran one...

Now I am wondering how hot my transfer case is getting.

hi guys,

curiosity got the better of me so i decided to pull my intank pump out...how did this pump support 365awkw when i had the car tuned back in 2004 (2.6ltr bottom end with sard 700cc & hks gtrs turbos)? how is this possible as it looks like the oem pump to me - can someone pls confirm if this in fact the factory pump for an r32 gtr?

i did have the relay added to the fuel pump harness wiring to increase the voltage but that was it - hmmm

post-8728-0-43811200-1364100633_thumb.jpg

I have now confirmed it is an r32gtr pump but can't find the flow rate on this unit...I'm still baffled /surprised that it supported 365awkw

http://www.nengun.com/nissan/skyline-fuel-pump-bnr32-genuine-217055

Are the surge tanks really nessesary, 2 nights ago I throught to myself I'm going to put a end to all this talk about surge tanks and test my setup.

Got some decent windy roads around my way, they all private of coarse.... So my tank was low, like the light was on and the needle only just on the E white line.

And I was into it, throwing it into the corners, coming out of them sideways foot flat, up too 140+ and back down to 40 around some of the bends...... Not 1 drop of surge, nothing it was like I had a full tank of fuel..... This is 330kw -5's on 98, but still it was a low tank.

I don't see the need for a surge tank in a street/track car.... And for a track car, just go buy a fuel cell.....

Keep it simple guys, less sht goes wrong.

And now I understand why you don't have surge issues Dean...I took the entire fuel pump holding bracket & harness out (which sits in a track at the bottom of the tank) & now I am much more comfortable about running just an intank fuel pump. The OEM system has a surge tank which by my calculations holds just under 1 litre of fuel & this is constantly replenished by the return line which is the black fuel line in the pic with a zip tie on it. The return line runs directly back into the base of the surge tank & obviously if the tank has more than say 10% fuel, the height of the fuel line will also overflow into the surge tank from over the top which is the opening where the fuel pump sits in its cradle.

Verdict? Under car surge tank is coming out & my 'Bugatti Veyron' pump will replace the OEM fuel pump...not much modding required to make this work.

post-8728-0-30993900-1364119772_thumb.jpg

And now I understand why you don't have surge issues Dean...I took the entire fuel pump holding bracket & harness out (which sits in a track at the bottom of the tank) & now I am much more comfortable about running just an intank fuel pump. The OEM system has a surge tank which by my calculations holds just under 1 litre of fuel & this is constantly replenished by the return line which is the black fuel line in the pic with a zip tie on it. The return line runs directly back into the base of the surge tank & obviously if the tank has more than say 10% fuel, the height of the fuel line will also overflow into the surge tank from over the top which is the opening where the fuel pump sits in its cradle.

Verdict? Under car surge tank is coming out & my 'Bugatti Veyron' pump will replace the OEM fuel pump...not much modding required to make this work.

The pierburg should drop in easily & provide all the fuel you should ever need .

Where did you pick up your pierburg from ?

The pierburg should drop in easily & provide all the fuel you should ever need .

Where did you pick up your pierburg from ?

i bought it from efi performance.

i just noticed that the supplied fuel sock doesn't work, the mating diameter is about 5mm too large - where can i source a fuel sock, any ideas?

Just remember, at WOT there is very little fuel being returned to the tank.

Can't EFI supply a sock? If not, I may be able to help you out... :)

thanks :) I've emailed EFI and I'll call them tomorrow. If I have no luck, I'll be in touch

update. i spoke to efi performance today & was advised that all i need to do is run a '-10 push lock hose' between the pump inlet and the filter & job is done :)

i asked about retaining my intank pump & running the pierburg inline without surge tank (under the car)...not a good idea as the pierburg will run my intank dry hence best that i remove the intank pump & run the new pump intank with the removal of my surge tank/044 setup.

they ran a car tuned on e85 making 500whp & didnt hit the limit of the pump (e85 needs approx 30% more flow).

they also ran this pump on multiple cars making over 500kw atw with 98 & have never hit the limit of this pump

Did you have a look at the new walbro 460lph. The specs I've seen says it will flow 5.6l/min @5bar and 13.5v compared to that of the 044 that flows 4.16l/hr @5bar and 13.5v it looks as though it would be great for e85. Can't see why this pump wouldn't be good enough for 500rwkw on pump or 350rwkw on e85.

thanks for sharing - now makes more sense as to how my oem pump supported 365awkw..."Nissan R33 Skyline GT-R stock. This factory Nismo fuel pump was tested to flow 252 lph at 43 psi and 13.5 volts."

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
    • I was able to get some underside photos while the car was on the ramp The suspension is all Altezza/IS200/IS300 so getting part's will hopefully be less of a headache
    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
    • Apologies for the long read My R34 GTT was up for sale at the beginning of spring due to a few repairs creeping up. The strut tops needed replacing, roof and bonnet (hood) painting (yay for 3 stage pearl) and the underside stripped and treated. I sold the car which allowed me to be in a much better place financially. Leading up to the sale I was already thinking about the replacement. In an ideal world it needed to be a good all-rounder. Something I can mess around with, modify, do track days, do the school run, go on long drives etc.  Options included but not limited to... Laurel C35, Evo 8/9, Civic FD2, Impreza Hawkeye, Aristo and even an Audi S4 Avant (I've already got the Mazda 6 wagon). But there was always one car at the top of the list The Toyota Mark ii JZX110 I found an advert on a Facebook group for an example in Japan, from a seller called Jon at Rising Sun Exports. A few messages back and forth and Jon calls me from Yokohama one morning (or afternoon in his case). He briefly explained the import process, the costs involved and a repeat of the advert. After much deliberation, the price was agreed and the sale was locked in. I've never imported a vehicle so I jumped into the unknown head first. The money transfer was completed through wise.com (fees apply), very easy to use and the money was with him within a day or two.  The car suspension was raised for the vessel and the car dropped off at the port. It was 7 weeks later when the bill of lading was received and the freight invoice sent to me, followed by the export certificate a couple of days after (both digital copies) In the mean time the port had been in contact. I needed an agent to deal with the NOVA (notification of vehicle arrival) along with the tax/duty invoice, this was £75.00. The port also had a fee of £100, I'm guessing to cover the cost of the 10 day 'free storage' and for moving the car off the boat etc. They need a copy of the vehicle invoice, freight invoice and export certificate to allow the vehicle to pass through customs. The vessel arrived on Tuesday 5th August, the tax/duty invoice was generated and sent over. This is generally tax 20% and duty 10% of the vehicle value. Although the invoice came in at a higher amount than I had calculated. Once HMRC had received the payment the vehicle could be released from customs. I thought once the tax/duty was paid you could collect at any point, that's not the case. Your agent will need to book a collection slot, I requested Thursday 7th which was accepted, with a 9:00am slot allocated. It was a 5:00am start from Norfolk heading to Southampton. We eventually found the compound, upon presenting the bill of lading and some ID they released the car (they drove it out of the compound to the front ready for us to load up). The email from the port stated each slot had a 10 minute window, which seemed abit farfetched but the staff said it's not a strict rule. We were there for approx. 30-40 mins in total. A week prior to collecting I contacted my garage and explained the situation, I was able to get an inspection slot that afternoon. For the registration, DVLA require the car to be insured, for this I used a company called Adrian Flux who can insure the vehicle using the VIN number. 
    • Hey guys, looking for these side skirts if anyone can help me out. 
×
×
  • Create New...