Jump to content
SAU Community

Recommended Posts

Hey guys,

Just curious how rare and difficult these cars are to obtain. If one were looking for a RX-7 (series 6+) with no major modifications, and in decent condition how difficult would it be to find? Also, how much would one expect to pay. They seem to average around $25,000 here in Australia.

Cheers.

Link to comment
https://www.sau.com.au/forums/topic/362101-importing-an-fd-rx-7/
Share on other sites

Ah okay. I was reading through wiki and read that Australia had some RX7s. How do the S7/8 get here then? I thought we couldn't import cars that were Australian delivered.

or sold between certain dates. hence the reason you cannont comply 91 GTRs.

s6 rx7 was sold here. there are a few grey s6 running around but not many.

Kez,

If you are in WA, I will be putting my series 8 on the market in a few months, once my new 370gt gets a little closer to our shores.

Car is basically stock, Cusco Zero 1 Coilovers are the only major mod apart from a panasonic touchscreen Sat Nav/Ipod/DVD player and small amp and sub in the boot, turbo timer and alarm. It is in very good condition mechanically the only issue is the dodgy Mazda paint that they put on is starting to look a little rough around the edges if you look closely. Still has about 2-2.5 years warrenty on it from the Importer i got it from here in WA, send me a pm if you are interested, i havent really thought too much about selling it yet, been more focused on sourcing the 370gt.

I had basically decided to spend $10,000 - $15,000 on it to turn it into the monster that it should have been out of the factory, if Mazda hadnt needed to stick to a budget and make some money on them, but the Missus cant drive it and it does guzzle fuel like a muthaf'er around town. I'm pretty certain that I am going to be pretty devasted once it is gone, the 370gt is going to the a hell of a lot more luxurious but i dont think I will be as confident flicking through round-abouts at 100kph as in the mazda. I used to live in Kalgoorlie and it was great fun seeing v8's try to keep up and dissapearing into the distance as soon as their was any sort of bend in the road. Nothing funier than seeing someone shit themselves in the rear view mirror when they realise than they shouldnt have followed me into a round-about at 100.

Al

Be prepared to rebuild a S8 even if its super clean when you bring it in, I was looking for one before i bought my gtr and just found that after about 60000kms its literally a matter of time before a rebuild due to the seals deteriating. Buying one in aus with a rebuilt motor for a little bit more is a near safer option than buying a good standard one then spending 8-10k on a rebuild. The thing that kills them is the heat, the stock twins are terrible and often blow. Good mods to look for are; aftermarket radiator, metal air/water seperator, V mount intercoolers are also good as they provide better air flow to the radiator than a front mount. These mods provide reliability for the 13b. Dont be scared of buying one but do your research into the rx7, like HEAPS of research, there very different to mod to piston turbo cars.

Yeah I'm aware of the rebuild issue, but my understanding is they're a lot cheaper to rebuild than a piston engine anyway.

I've heard all sort of stories, from people rebuilding them every 20,000ks to people have clocked over 300,000km on their old rotary without an issue.

I understand they have their drawbacks, reliability and fuel consumption being two primary ones, but RX-7 itself is a phenomenal car. They rival Silvia's in weight and balance, yet can compete with the 2JZ in outright power. Plus they look and sound amazing. Damn, I sound like a fanboy already.

Kez,

If you are in WA, I will be putting my series 8 on the market in a few months, once my new 370gt gets a little closer to our shores.

Car is basically stock, Cusco Zero 1 Coilovers are the only major mod apart from a panasonic touchscreen Sat Nav/Ipod/DVD player and small amp and sub in the boot, turbo timer and alarm. It is in very good condition mechanically the only issue is the dodgy Mazda paint that they put on is starting to look a little rough around the edges if you look closely. Still has about 2-2.5 years warrenty on it from the Importer i got it from here in WA, send me a pm if you are interested, i havent really thought too much about selling it yet, been more focused on sourcing the 370gt.

I had basically decided to spend $10,000 - $15,000 on it to turn it into the monster that it should have been out of the factory, if Mazda hadnt needed to stick to a budget and make some money on them, but the Missus cant drive it and it does guzzle fuel like a muthaf'er around town. I'm pretty certain that I am going to be pretty devasted once it is gone, the 370gt is going to the a hell of a lot more luxurious but i dont think I will be as confident flicking through round-abouts at 100kph as in the mazda. I used to live in Kalgoorlie and it was great fun seeing v8's try to keep up and dissapearing into the distance as soon as their was any sort of bend in the road. Nothing funier than seeing someone shit themselves in the rear view mirror when they realise than they shouldnt have followed me into a round-about at 100.

Al

Sounds like an awesome car mate, but I'm in Victoria and not off my P's for a while which is why I'm considering importing as I have time to wait.

Truly epic car. Brought in an S6 about 5 years ago and sold it to a dude from QLD - he flew over one night to check it out, left a deposit and organised a truck to ship it a few days later after sending through a bank cheque. This was a 94 model with just over 40,000km on it, and the engine was fine. Sweet sweet rotary goodness.

Yeah I'm aware of the rebuild issue, but my understanding is they're a lot cheaper to rebuild than a piston engine anyway.

I've heard all sort of stories, from people rebuilding them every 20,000ks to people have clocked over 300,000km on their old rotary without an issue.

I understand they have their drawbacks, reliability and fuel consumption being two primary ones, but RX-7 itself is a phenomenal car. They rival Silvia's in weight and balance, yet can compete with the 2JZ in outright power. Plus they look and sound amazing. Damn, I sound like a fanboy already.

Yes they are cheaper than a piston engine but its still about 8k for someone decent to rebuild them. I did a LOT of research and spoke to many rotary specialists, your honestly better off buying one thats been built with a fresh motor with receipts from a reputable workshop, you will save yourself a lot of time and money. Basically I could get a good stock series 8 for 23-25k (in Aus and imported), I could get a mint Series 8 with a rebuilt motor and bigger turbo for 30k that had 16k worth of receipts for the engine build, turbo upgrade and a lot of the reliability mods such as bigger radiator etc.

Im not trying to turn you off them at all as they are a wicked car (i always wanted a gtr and mine come up at a good price), just research and speak to people that deal with them rather than the stories you have heard, jump on the rotary forums and ask about. I just found anything over 60000kms with a stock motor and it was when it needed a rebuild not if it would need one, the standard seals just let go.

Been considering these lately too...the engine rebuilds are the only thing turning me off them. Such a shame because the engines feel so nice and smooth to rev. Some very nice and clean 2001 examples came up on J-spec a while ago, estimated cost ready to drive on the road was about 21k. They've certainly come down in price since the Australian dollar is doing well against the yen.

yeah they are awesome and yes they are a bit fragile. the turbos on the S8 are actually very good and make an easy 250kw with basic mods. the factory radiator is already V mount of sorts and actually works pretty well. Personally I bought a Series 8 2001 RZ in japan. it had about 30,000kms but engine was already a little tired so I had a full rebuild done on it in japan at a japanese rotary specialist (amazing work, speed and price). it was fantastic. was putting out around 250kw with just a conservative ECU re-tune, little bit of boost and a nice (LOUD!) exhaust. was such a fun car to drive, amazingly well balanced. makes even a hack driver into some kind of drifting virtuoso. I wouldn't hesitate to own one again but it would have to be another RZ (bit hard as they only made 150 of them) or a spirit R (bit easier as they number in the thousands). I sold my RZ for very low 30K range which was a steal. it had an engine with only a handful of km on it, all the original RZ gear (carbon kevlar recaros, BBS wheels, bilstein suspension etc) along with book and receipts for all the work done.

great car but you need to be prepared to spend the money up front to buy a good one, and then spend the money maintaining it and most likely rebuilding it. if you're after a 'bargain' or a 'cheap one' then they are not the car for you. it will just bring heart ache. if you're buying an FD you should be looking at the top end of the market as tha's where the cars worth buying are. or buy a cheaper one and rebuild immediately.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Update 3: Hi all It's been a while. Quite a lot of things happened in the meantime, among other things the car is (almost) back together and ready to be started again. Things that I fixed or changed: Full turbo removal, fitting back the OEM turbo oil hardlines. Had to do quite a bit of research and parts shopping to get every last piece that I need and make it work with the GT2860 turbos, but it does work and is not hard to do. Proves that the previous owner(s) just did not want to. While I was there I set the preload for the wastegates to 0,9bar to hopefully make it easier for the tuner to hit the 370hp I need for the legal inspections that will follow later on. Boost can always go up if necessary. Fitted a AN10 line from the catch can to the intake hose to make the catchcan and hopefully the cam covers a slight vacuum to have less restrictive oil returns from the head and not have mud build up as harshly in the lines and catch can. Removed the entire front interior just shy of the dashboard itself to clean up some of the absolutely horrendous wiring, (hopefully) fix the bumpy tacho and put in LED bulbs while I was there. Also put in bulbs where there was none before, like the airbag one. I also used that chance to remove the LED rpm gauge on the steering column, which was also wired in absolute horror show fashion. Moved the 4in1 Prosport gauge from sitting in front of the OEM oil pressure gauge to the center console vents, I used a 3D printed vent piece to hold that gauge there. The HKB steering wheel boss was likely on incorrectly as I sometimes noticed the indicator reset being uneven for left vs. right. In the meantime also installed an airbag delete resistor, as one should. Installed Cube Speed premium short shifter. Feels pretty nice, hope it'll work great too when I actually get to drive. Also put on a fancy Dragon Ball shift knob, cause why not. My buddy was kind enough to weld the rust hole in the back, it was basically rusted through in the lowermost corner of the passenger side trunk area where the wheel arch, trunk panel and rear quarter all meet. Obviously there is still a lot of crustiness in various areas but as long as it's not rusted out I'll just treat and isolate the corrosion and pretend it's not there. Also had to put down a new ground wire for the rear subframe as the original one was BARELY there. Probably a bit controversial depending on who you ask about this... but I ended up just covering the crack in the side of the engine block, the one above the oil feed, with JB Weld. I used a generous amount and roughed up the whole area with a Dremel before, so I hope this will hold the coolant where it should be for the foreseeable future. Did a cam cover gasket job as the half moons were a bit leaky, and there too one could see the people who worked on this car before me were absolute tools. The same half moons were probably used like 3 times without even cleaning the old RTV off. Dremeled out the inside of the flange where the turbine housing mates onto the exhaust manifolds so the diameter matches, as the OEM exhaust manifolds are even narrower than the turbine housings as we all know. Even if this doesn't do much, I had them out anyways, so can't harm. Ideally one would port-match both the turbo and the manifold to the gasket size but I really didn't feel up to disassembling the turbine housings. Wrapped turbo outlet dumps in heat wrap band. Will do the frontpipe again as well as now the oil leak which promted me to tear apart half the engine in the first place is hopefully fixed. Fitted an ATI super damper to get rid of the worn old harmonic balancer. Surely one of the easiest and most worth to do mods. But torquing that ARP bolt to spec was a bitch without being able to lock the flywheel. Did some minor adjustments in the ECU tables to change some things I didn't like, like the launch control that was ALWAYS active. Treated rusty spots and surface corrosion on places I could get to and on many spots under the car, not pretty or ideal but good enough for now. Removed the N1 rear spats and the carbon surrounding for the tailpipe to put them back on with new adhesive as the old one was lifting in many spots, not pretty. Took out the passenger rear lamp housing... what do you know. Amateur work screwed me again here as they were glued in hard and removing it took a lot of force, so I broke one of the housing bolts off. And when removing the adhesive from the chassis the paint came right off too. Thankfully all the damaged area won't be visible later, but whoever did the very limited bodywork on this car needs to have their limbs chopped off piece by piece.   Quite a list if I do say so myself, but a lot of time was spent just discovering new shit that is wrong with the car and finding a solution or parts to fix it. My last problem that I now have the headache of dealing with is that the exhaust studs on the turbo outlets are M10x1.25 threaded, but the previous owner already put on regular M10 nuts so the threads are... weird. I only found this out the hard way. So now I will just try if I can in any way fit the front pipe regardless, if not I'll have to redo the studs with the turbos installed. Lesson learned for the future: Redo ALL studs you put your hands on, especially if they are old and the previous owners were inept maniacs. Thanks for reading if you did, will update when the engine runs again. Hope nothing breaks or leaks and I can do a test drive.
    • No those pads are DBA too  but they have colors too. I look at the and imo the green "street" are the best.
    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
×
×
  • Create New...