Jump to content
SAU Community

Recommended Posts

  • Replies 436
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

me and Gary Oliver are definitely racing... double entering the cressida...

still waiting on richie and jordan bradshaw to confirm.

Can we pay on the day? or do we need to pay prior? (can pay at st ives next week lol)

Joel, please do bring them along. I'll have some of my camera gear too if you want to try your hand at shooting some video.

sounds like a plan eric! might even be able to talk louise into controlling the video camera for the day :P

me and Gary Oliver are definitely racing... double entering the cressida...

still waiting on richie and jordan bradshaw to confirm.

Can we pay on the day? or do we need to pay prior? (can pay at st ives next week lol)

This event is absolutely going forward, and it's going to be great :D

There are about 15 spots remaining until we are full, but WSID require us to cut off entries after this weekend.

So get in quickly!

You need to enter before Sunday as WSID require all names and money paid a week prior to the event

You can run on slicks with all the usual rules that apply. You can't run quicker than 12.50 if you have slicks on the rear and radials on the front.

So does this mean that you should either run radials all around or semi slicks all around?

You can run on slicks with all the usual rules that apply. You can't run quicker than 12.50 if you have slicks on the rear and radials on the front.

All the usual rules ? Ive never done this before so I know not of these "usual rules", I was going to run on some circuit slicks in a soft compound so I dont wreck my Semis, sounds like Im going to run Semi Slicks then, there are more rules in this than there are in a Super Sprint, and they dont turn corners, LOL.

If there are any other rules or regs can they posted up in the first post please.

Mark

Semi slicks will grip better than radial tyres once you have done a tiny burnout (no u wont need to sit with your foot on the brake pedal for 2mins until you are surrounded by smoke).

However semi slicks have a stiff side wall (which is why they corner well on a circuit) so they may cause axle tramp or tyre spin off the line because they cant flex as well but after you grab second gear they will be better than radial tyres on the prep'd track.

A great option if you are on a budget is a set of r32 gtr (or gtst) factory 16" wheels and the best radial tyres you can buy with a big sidewall with a pressure under 30psi as it will allow the big sidewall to flex and act as a sling shot off the line.

Anything above 17" wheels (so i mean your 19 or 20" chromies that look good when you are in a parking lot) and you are just asking for wheelspin or axle tramp all day long and if you have never been on a drag strip before you will be staring at 14sec passes in a 12sec car.

So does this mean that you should either run radials all around or semi slicks all around?

I see your confusion. Poor circuit boy no understandy drag racing lingo! Fear not, us knuckle draggers aren;t very smart so it can't be very hard to understand. Rubber -

1. Slicks are bias ply "Drag Slicks" purpose built for drag racing with soft compound and tall sidewalls. This is the best you can get for drag racing.

2. Drag Radials are radial tyres purpose built for drag racing to have soft compound, tall sidewalls and as much "give" as radials can manage. Second best.

3. Street Radials are radial tyres for street purposes.

R compound street radials or "Semi Slicks" are street raidlas with a softer comound and a very stiff sidewall. They aren't very good for drag racing (compared to slicks or Drag Radials).

You can't mix BIAS PLY and RADIALS. So you can run front runners and slicks (bias play all round) or you can run Street Radials/Drag Radials/R Compounds in any mix you care to try out.

You can run street radials up front and R compound (semi slicks) on the rear without any issue.

Edited by MrBlonde

Deano45....good to hear :D

me and Gary Oliver are definitely racing... double entering the cressida...

still waiting on richie and jordan bradshaw to confirm.

Can we pay on the day? or do we need to pay prior? (can pay at st ives next week lol)

No, WSID require a complete list of entrants by noon Tuesday. Make sure Dave has your entry by then, we cannot change these rules.

There are still spots available...so for those considering entering, get your details in ASAP!

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
×
×
  • Create New...