Jump to content
SAU Community

Dry Sumps And You.......

Risking
 Share

Recommended Posts

Risking Grand Master

Risking

Posted
  • Author
Posted

I'm releasing a fantastic new oil setup at the moment which is a hybrid dry/wet sump system.

Using a 9L fabricated sump, 2 stage pump and a "surge tank"

The single scavenge stage draws from the 9L sump and fills a 2.5L resiviour (surge tank) mounted inside the wheel arch or engine bay. The single pressure stage draws from the resiviour and pressurizes the engine.

From the top of the resiviour a return back to the sump allows the tank to breath and overflow.

Pro's

As good at controlling surge as a full on dry sump

Far cheaper than a dry sump

Less plumbing

External pump so no breakages!

Lower weight not having the large tank and lines

So far testing has been faultless with perfect oil pressure logs when running on slicks.

I've also just completed the first prototype resiviour to fit into the original space occupied by the washer bottle on the R32.

  • Replies 177
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

bigmikespec
bigmikespec

Do you have a set of baffles in the tank Brad? What capacity is the tank? Looking at the D.E. or Verdi pump with an air/oil separator the design of the tank can be a lot simpler which owes itself to

Posted Images

Risking Grand Master

Risking

Posted
  • Author
Posted

Ryan I have two Vehicles already doing some laps. One is an r32 GTR and the other is an r33 GTST RB25.

So far pricing is on a case by case basis as I'm insisting on doing the installation myself or atleast controlling it due to the nature of the setup not really having been done before.

Bracket, balancer, and drive kit are identical to dry dump parts. Sump is a modified version on my normal 9L sump, pump is a two stage and the surge tank is obviously custom.

Send me a email if your keen to get a quote and have one done.

  • 4 weeks later...
  • 3 months later...
BEN 0 Collaborator

BEN 0

Posted
Posted

Sorry to revive this excellent thread but one quick question

Is it still necessary to enlarge the block oil returns and restrict the block feed orifices when running dry sump setup?

Obviously enlarged returns will benefit no matter but if the engine is already assembled then how much off a disadvantage will it be on dry sump setup?

Thanks

  • 2 weeks later...
  • 4 months later...
  • 3 weeks later...
Buckna Community Regular

Buckna

Posted
Posted

Sorry to revive this excellent thread but one quick question

Is it still necessary to enlarge the block oil returns and restrict the block feed orifices when running dry sump setup?

Obviously enlarged returns will benefit no matter but if the engine is already assembled then how much off a disadvantage will it be on dry sump setup?

Thanks

I'd also like to know this.

Do I still need to run the restrictors in the block? Or will the vacuum in the engine be enough to suck the oil back down without any issues with the bigger head feeds.

I shot you an email also brad, haven't heard back yet, I understand your busy! see if you could look out for it. keen to get this sorted asap.

Also, I have seen many circuit cars run -12 and -10 lines for the dry sump, and then many run -12 and -16 lines.

Is it wrong to run the smaller lines? can it cause issues? or will it all work to an extent?

  • 4 weeks later...
HGHOON Apprentice

HGHOON

Posted
Posted

hey, being a noob to dry sump etc, the one thing i havent seen on here is where the pressure line is fed back into the block? doe it run through a cooler and into the block via the filter port???, and wat do u do with the stock pump? take the gears out and block it up or something like that? any info would be much appreciated

  • 2 months later...
warps Mentor

warps

Posted
Posted (edited)

Theres another thread?

Referring the thread to Risking (Pro Fabrication) and why the previous poster should probably reconsider pursuing this avenue.

Edit: nm - beaten to it

Edited by warps

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      So, before putting them in I need to understand the stock ride height. This is how I measured it: First, check the diameter of the wheel's centre cap, it was 52mm. Then put a piece of masking tape approximately across the centre and measure 27mm (half) from at least 3 sides to get a reasonable idea of the centre of the wheel cap. Mark that with a horizontal line as one measuring point. Then, directly above the wheel on the guard, put another piece of masking tape in approximately the centre. Use a string line to find out the point on the guard above the centre of the wheel cap and mark that. Then it is simple, just a tape measure to check the distance from centre of the wheel to the centre of the guard. Final results where  LF: 381mm RF: 379mm LR: 401mm RR: 400mm Pretty even considering they are 120,000klm old factory springs, lets call that 380 front and 400 rear.
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      So....knowing that I have a problem with power steering temps on track and another Wakefield day booked in next Friday, I've done the obvious thing They are very reasonably priced at $1650, considering they are a big monotube shock, double height adjustable (don't have to change pre-load to change ride height), one way adjustable damping and standard sized and customisable springs if you want something other than what comes with them. They come with 9kg/mm front and 4.5kg/mm front and I went with that as a starting point because I'll add adjustable sway bars too https://justjap.com/products/bc-racing-coilover-kit-ds-ds-infiniti-q50-v37-14-current#description Unfortunately they didn't come with rear strut tops so I've re-used the factory ones which was a bit of a pain. Also, the adjuster for the rear shock will be an absolute nightmare to get at, and while there are extensions in the kit I can't see any way you can actually attach or use them
    • Duncan
      One Headlight isn't working - Driver Side Fuse Keeps blowing

      By Duncan · Posted

      I also had 2 bulbs blow at once, years ago in the stagea. made for a fun drive home. The issue was the voltage regulator had failed in the alternator and it was giving 15+ volts. Really, I was lucky all that was fried were the headlight bulbs. So, I'd suggest you check the voltage across your battery terminals with the car running and warmed up. Yes, you will need a multimeter to do so, sorry.
    • Duncan
      R32 GTS (RB20DE) Injectors Replacement

      By Duncan · Posted

      Good work to think to check that, and thanks for coming back to post up the outcome.
    • Duncan
      98 R34GTT 4k engine stumble

      By Duncan · Posted

      Given it happened suddenly, and when you come on boost, I'd check all your inlet - hose clamps in place and no split rubber or silicone hoses. Even the hard to get to ones near the intercooler. It's possible air that went past the air flow meter is being dumped out a big hole.
×
×
  • Create New...