Jump to content
SAU Community

Recommended Posts

  • Replies 264
  • Created
  • Last Reply

Top Posters In This Topic

Before I fork out my hard earned cash for the entry fee can we please confirm that this day at Wakefield will be going ahead as planned and that the only change is that it will now be run by SAU?

what does it mean now that its just SAU running? different format to the day? any pricing differences?

Before I fork out my hard earned cash for the entry fee can we please confirm that this day at Wakefield will be going ahead as planned and that the only change is that it will now be run by SAU?

Yes, it will be run to the same format as normal for SAU track days:

* 5 groups, each group has 1 session per hour

* 8 cars per group so that there is plenty of space

* groups split by expected lap time and experience - no wife's mx5 and a race car turning up at the same corner together

* Any untimed session will allow passengers/instructors. You can still run timing in your car if you wish.

* Club and other instructors will be available on the day

We will survey the paid entrants shortly before the day to work out how many, if any, of the 5 sessions will be timed.

Track days are a big financial commitment for the club, and this may be a difficult time of year. The best thing our members can do to make sure we can keep running track days is to enter, and enter early :D We need to fill about 35 places to break even on these days due to the big increases in track hire costs since Oran Park went.

  • 2 weeks later...

last Exige i saw at Wakefield lost most of its front splitter after coming off on turn 4, hope you have a little more luck!

not paid yet but hope to be at this one and good point whoever made it about higher cost of EC being somewhat mitigated by using less fuel to get there..will factor into my decision on stumping up for it. jesus that track can get scary when you hit some speed though..

Hey guys. Hope you don't mind me having a run with you.

Looking forward to a great day.

Mate, you're more then welcome to come along, we don't mind what people drive, so long as you're friendly and aren't a twat on the track!

Timing ?

Sorry for asking but it is a desicion maker for me.

Mark.

Mark, due to going back to our normal setup of driver training being the key, most likely not.

That and a $200 lap timer like Erics will be a solid investment for you. Not only will you have laptimes, but you can visually see where you were going on the track and find out where you should be each lap to find your quickest times.

That also turns every cheap normal track day into a timed session for you... ;)

Yup - two options there:

QStarz - independent 5hz GPS Logger that comes with QRacing Software for analysis. Very impressive piece of kit for $175! (Google it)

Other option is the Contour GPS or Contour Plus. These integrate a 4hz GPS signal into video. You know those overlays I do that look like telemetry? You'll need to buy Dashware ($50) but the end result is quite impressive without all the hassle I go through to sync the video and GPS data. Contour GPS is about $300 and Contour Plus about $500 through Fleabay.

I'm hopeless with computers and really cannot be f*kd in setting up lap timers and seeing how fast I am through turn 4, all I want is at the end of the day is the best time I got when I got 1 lap partially right, I will never be a good driver as work and family means I might get 4 or 5 trackday a year if I'm lucky, seat time is not something I will ever have.

My driving style is to go as quick as my balls will let me and try and get quicker than my last outing, mainly through 90% luck with 10% skill.

If this event is not going to be timed just say so, and change the advertised information to reflect this, a lot of people like me only like doing timed events

Hi folks,

Just wanted to let you know that we are looking into timing and the structure of the day. Things were left hanging when Renew pulled out and I have the committee working on options.

Please be a little patient as we know how keen everyone is about the day and will do our best to meet requests. We also need to get this day filled up as Duncan pointed out, if we cannot get the numbers up we will have to pull it. That's the last thing we want to do.

Again, please be a little patient as coordinating all of the logistics takes time. We should have all of the updates in a couple weeks.

[Edit]

First post has been updated.

We are looking into timing options for the day and will post more when we have more info.

Thanks.

Tats, I'm going to be away on holiday (BUGGER!) but happy to lend my GPS lap timer to one of the Club exec's so you can get a base line session in. They just need to make sure they let me know what time your session was so I can extract your data.

Tats, I'm going to be away on holiday (BUGGER!) but happy to lend my GPS lap timer to one of the Club exec's so you can get a base line session in. They just need to make sure they let me know what time your session was so I can extract your data.

You're a gentleman, i was hoping to get "best lap" results in between sessions but this is much better than having nothing. Will discuss closer to the day.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Well, that's kinda the point. The calipers might interfere with the inside of the barrels 16" rims are only about 14" inside the barrels, which is ~350mm, and 334mm rotors only leave about 8mm outboard for the caliper before you get to 350, And.... that;s not gunna be enough. If the rims have a larger ID than that, you might sneak it in. I'd be putting a measuring stick inside the wheel and eyeballing the extra required for the caliper outboard of the rotor before committing to bolting it all on.
    • OK, so again it has been a bit of a break but it was around researching what had been done since I didn't have access to Neil's records and not everything is obvious without pulling stuff apart. Happily the guy who assembled the engine had kept reasonable records, so we now know the final spec is: Bottom end: Standard block and crank Ross 86.5mm forgies, 9:1 compression Spool forged rods Standard main bolts Oil pump Spool billet gears in standard housing Aeroflow extended and baffled sump Head Freshly rebuilt standard head with new 80lb valve springs Mild porting/port match Head oil feed restrictor VCT disabled Tighe 805C reground cams (255 duration, 8.93 lift)  Adjustable cam gears on inlet/exhaust Standard head bolts, gasket not confirmed but assumed MLS External 555cc Nismo injectors Z32 AFM Bosch 023 Intank fuel pump Garret 2871 (factory housings and manifold) Hypertune FFP plenum with standard throttle   Time to book in a trip to Unigroup
    • I forgot about my shiny new plates!
    • Well, apparently they do fit, however this wont be a problem if not because the car will be stationary while i do the suspension work. I was just going to use the 16's to roll the old girl around if I needed to. I just need to get the E90 back on the road first. Yes! I'm a believer! 🙌 So, I contacted them because the site kinda sucks and I was really confused about what I'd need. They put together a package for me and because I was spraying all the seat surfaces and not doing spot fixes I decided not to send them a headrest to colour match, I just used their colour on file (and it was spot on).  I got some heavy duty cleaner, 1L of colour, a small bottle of dye hardener and a small bottle of the dye top coat. I also got a spray gun as I needed a larger nozzle than the gun I had and it was only $40 extra. From memory the total was ~$450 ish. Its not cheap but the result is awesome. They did add repair bits and pieces to the quote originally and the cost came down significantly when I said I didn't need any repair products. I did it over a weekend. The only issues I had were my own; I forgot to mix the hardener into the dye two coats but I had enough dye for 2 more coats with the hardener. I also just used up all the dye because why not and i rushed the last coat which gave me some runs. Thankfully the runs are under the headrests. The gun pattern wasn't great, very round and would have been better if it was a line. It made it a little tricky to get consistent coverage and I think having done the extra coats probably helped conceal any coverage issues. I contacted them again a few months later so I could get our X5 done (who the f**k thought white leather was a good idea for a family car?!) and they said they had some training to do in Sydney and I could get a reduced rate on the leather fix in the X5 if I let them demo their product on our car. So I agreed. When I took Bec in the E39 to pick it up, I showed them the job I'd done in my car and they were all (students included) really impressed. Note that they said the runs I created could be fixed easily at the time with a brush or an air compressor gun. So, now with the two cars done I can absolutely recommend Colourlock.  I'll take pics of both interiors and create a new thread.
    • Power is fed to the ECU when the ignition switch is switched to IGN, at terminal 58. That same wire also connects to the ECCS relay to provide both the coil power and the contact side. When the ECU sees power at 58 it switches 16 to earth, which pulls the ECCS relay on, which feeds main power into the ECU and also to a bunch of other things. None of this is directly involved in the fuel pump - it just has to happen first. The ECU will pull terminal 18 to earth when it wants the fuel pump to run. This allows the fuel pump relay to pull in, which switches power on into the rest of the fuel pump control equipment. The fuel pump control regulator is controlled from terminal 104 on the ECU and is switched high or low depending on whether the ECU thinks the pump needs to run high or low. (I don't know which way around that is, and it really doesn't matter right now). The fuel pump control reg is really just a resistor that controls how the power through the pump goes to earth. Either straight to earth, or via the resistor. This part doesn't matter much to us today. The power to the fuel pump relay comes from one of the switched wires from the IGN switch and fusebox that is not shown off to the left of this page. That power runs the fuel pump relay coil and a number of other engine peripherals. Those peripherals don't really matter. All that matters is that there should be power available at the relay when the key is in the right position. At least - I think it's switched. If it's not switched, then power will be there all the time. Either way, if you don't have power there when you need it (ie, key on) then it won't work. The input-output switching side of the relay gains its power from a line similar (but not the same as) the one that feeds the ECU. SO I presume that is switched. Again, if there is not power there when you need it, then you have to look upstream. And... the upshot of all that? There is no "ground" at the fuel pump relay. Where you say: and say that pin 1 Black/Pink is ground, that is not true. The ECU trigger is AF73, is black/pink, and is the "ground". When the ECU says it is. The Blue/White wire is the "constant" 12V to power the relay's coil. And when I say "constant", I mean it may well only be on when the key is on. As I said above. So, when the ECU says not to be running the pump (which is any time after about 3s of switching on, with no crank signal or engine speed yet), then you should see 12V at both 1 and 2. Because the 12V will be all the way up to the ECU terminal 18, waiting to be switched to ground. When the ECU switches the fuel pump on, then AF73 should go to ~0V, having been switched to ground and the voltage drop now occurring over the relay coil. 3 & 5 are easy. 5 is the other "constant" 12V, that may or may not be constant but will very much want to be there when the key is on. Same as above. 3 goes to the pump. There should never be 12V visible at 3 unless the relay is pulled in. As to where the immobiliser might have been spliced into all this.... It will either have to be on wire AF70 or AF71, whichever is most accessible near the alarm. Given that all those wires run from the engine bay fusebox or the ECU, via the driver's area to the rear of the car, it could really be either. AF70 will be the same colour from the appropriate fuse all the way to the pump. If it has been cut and is dangling, you should be able to see that  in that area somewhere. Same with AF71.   You really should be able to force the pump to run. Just jump 12V onto AF72 and it should go. That will prove that the pump itself is willing to go along with you when you sort out the upstream. You really should be able to force the fuel pump relay on. Just short AF73 to earth when the key is on. If the pump runs, then the relay is fine, and all the power up to both inputs on the relay is fine. If it doesn't run (and given that you checked the relay itself actually works) then one or both of AF70 and AF71 are not bringing power to the game.
×
×
  • Create New...