Jump to content
SAU Community

Recommended Posts

taken off another forum

User 1 - Caltex are only and have only produced 70% Ethanol content fuel.

Its consistant 70% all year around at three local servo's here.

User 2 - He's telling me he emailed them today and they are switching to a summer blend 85% on november 30

He has gone with the decision to tune for united and then run caltex if needed.

sits tight and waits for confirmation :D

i was running Eflex at the beginning of all this, and despite a batch or two or low to mid 60's, after that, my sensor only ever read E70,bang on every time. Even in summer. We know that Caltex up until this point has never switched to a summer blend.

Then united came back in the game (big time here in Melb) and they've been very consistent, i've never seen lower then 82 or higher than 85.

I'm more than happy to run a tank of Eflex after Nov 30th to confirm this for you :)

cool cheers might make it like a week after to make sure their tanks have been over 90% refilled with a new blend

i found a quote from Martin Donnon saying Caltex had capped their E85 @ 70% for the first 2 years maybe theyre at the end of that 2 years

i will go look for quote

Q: Whats better United E85 or Caltex E-Flex?

A: That depends on the application. The major difference is that United tends to test at around 85% - 88% Ethanol content while Caltex have frozen their E-Flex at 70% Ethanol for the first two years of production. This means that although there is around a 2% greater power potential with United, the Caltex is better in 'fuel system limited' applications where the injectors and or pump are becoming marginal

Source

to me (and i've just realised this.... hahahaha) it's like having Lindt's 70% dark chocolate compared to Greens organic single origin 85% dark chocolate... you can't go back, 70% is too sweet - you need the hard stuff from then on :D

maybe my subconscious has been directing me to choose the 85% dark chocolate lol :D haha, can't believe i haven't made this connection before!

seriously though, Greens 85% is the absolute shizzle.... just like United's E85 :D

but bring on the Caltex E85! It feels like a cop out using it at the moment, more 'true' E85 outlets the better!!

I will just stick to united 85 for now. Amazing how the powerfc is so robust still with an e85 tune still.

My car is still using the nismo intank fuel pump. Not far off from reaching the 400kw mark on basic mods. The id1000s are only maxing out between 73-78% duty. So definitely impressed it with.

Go to Trent at Chequered for any sort of tune :)

  • 2 weeks later...

Great write up Daniel.

I have a sensor ready to install in my boat, I was just wondering why you tee'd off your fuel return line and didn't run all the return fuel through the sensor?

Is the sensor restrictive?

I have twin 044's and was hoping to run the return through the sensor...

Great write up Daniel.

I have a sensor ready to install in my boat, I was just wondering why you tee'd off your fuel return line and didn't run all the return fuel through the sensor?

Is the sensor restrictive?

I have twin 044's and was hoping to run the return through the sensor...

It's too small. Tee it off

It's only in the return line, it won't affect the maximum flow as the injectors are before it.

If you look inside your reg you will probably find a 2-3mm hole for the return bypass. It won't be an issue imo. I would still 'T' it off though just to be sure.

weird how Syd seems to vary more, and seems to be more on the high side? my united has been bang on E85 last few times, and before that it generally was 82-83 - but it's still been a very tight range.

It's only in the return line, it won't affect the maximum flow as the injectors are before it.

If you look inside your reg you will probably find a 2-3mm hole for the return bypass. It won't be an issue imo. I would still 'T' it off though just to be sure.

uhh yeah. restriction in the return so will bump up fuel pressure if anything, brain fade!

its fine running it full return on a few 400 +rwkw cars now.

Wouldn't it depend on what the fuel system setup is? IE having 2 x 044's at full noise at idle (if they ain't setup in a staggered setup).

its fine running it full return on a few 400 +rwkw cars now.

So you don't have any weird fuel pressure related issues at really low load with a big (300+lph worth) where the FPR would be dumping fuel back to the return?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...