Jump to content
SAU Community

Recommended Posts

i have a ls1 v8 auto commodore tow car.

its awesome.

it handles a big load no worries, you often forget your even towing sometimes!!!

i get 14.8 litres per 100 which isnt bad.

just needs some stiffer springs in the back as it tends to drag its arse a bit with a skyline behind it on the trailer.

i would recommend it as a tow car of choice to anyone. i would not recommend the xr6 turbo as the thing would be on boost all the time because of the load im figuring hence big fuel consumption.

Also just like to mention that I had a 2001 AU Falcon up until recently, and it was rubbish, terribly unreliable there was always something wrong with it, but in saying that it could have just been a lemon.

Must have been your car... Mine is reliable as anything and I've put over 50,000 km on it in the last year and a half.

Must have been your car... Mine is reliable as anything and I've put over 50,000 km on it in the last year and a half.

Got a mate who got given his grandparents AU Fairmont after they towed a caravan around australia, and owning it for about 8 years of daily driving before the trip. he got it at 350k's, almost up to 400 now with just basic servicing and still going strong.

Yeah, I'd go the Ford. Neither are v8, but up until recently I had a VT daily, had problem after problem until I got rid of it for the Stagea. Meanwhile my parents have an AU similar age, far more km's, they go away lots, barely ever gets serviced close to on time, and has never missed a beat. Both are boats, but the AU has a lot more torque and a lot nicer to drive.

Got a mate who got given his grandparents AU Fairmont after they towed a caravan around australia, and owning it for about 8 years of daily driving before the trip. he got it at 350k's, almost up to 400 now with just basic servicing and still going strong.

Not that it makes a difference, but it probably has the VCT tickford engine, being a fairmont.

Buy a Ford. you won't regret it. their engine last forever. why do you think most taxi's are all fords and not holden.

Yeah... but they are running on gas...

which has more problems comes down to who you speak too. generally speaking they both have a few faults, but will generally be hassle free. i've put about 10,000kms on my VT since march and here is a list off all the work i've had to do to it,

crytical stuff:

-new leads and plugs (did that last week as the old leads were friggin old, possibly the originals, and arcing out. $65, which craps all over the cost of new coils for a skyline, LOL)

-regassed the aircon and new dryer reciever (was original and only had 80% gas in it which was just enough that the aircon wouldn't cool. did this just after buying it and has been fine since)

-new o2 sensors. 1 was just starting to play up. (again, possibly the original items. and also changed for the sake of fuel economy.)

-new indicator stalk (relay inside was starting to tick and was driving me bonkers, new one cost about $20 on ebay)

non-crytical stuff:

-some dash bulbs

-standard springs (was lowered, had typical commodore camber issue and was cheaper than a camber kit)

-new fuel filter (did it just after i bought it for peace of mind)

-new thermostat (as above, done just after buying it for peace of mind since i drive nearly 65kms to work everyday)

i've also owned a falcon and had very little issues other than 2 head gaskets, but it was an EA so that says it all. owned a VX a few years back and it was also pretty reliable. only issue i ever had with it was the aircon compressor got a slight rattle to it (started after a bit of limiter bashing doing a burnout in a mates shed, LOL)

Not that it makes a difference, but it probably has the VCT tickford engine, being a fairmont.

Most AU Fairmont's I looked at did not have a VCT engine...

Maybe your thinking of the fairlane?

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Oh, also, forgot to add these photos I believe.
    • Thought i'd update on this. I was able to get in contact with Craig Lieberman and later on Darryl Alison (owner of Kaizo Industries). Darryl was able to help me verify that my car was in fact one of theirs and is helping me find more info on mine !
    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
×
×
  • Create New...