Jump to content
SAU Community

Recommended Posts

Good luck mate what sorta time you aiming for ? 12.? :nyaanyaa:

Yeh Mick, very close power wise.

The car still doesn't feel that quick, its a fair bit heavier than a skyline but the torque obviously helps. I guess I will see what it can do on Friday. :)

i don't finish work in the eastern burbs till 5.30

but there is a few of us planing to come in for a geez, spose we will be there round 7-7.30

ill bring my camera for ya.

Great, see you there. :thumbsup:

At least this time someone will know what a Stagea is. Lol.

I did 13.5 with 240kw, a low down throttle restriction and speed cut by 3/4 track. Hoping for a high 11 this time out but I doubt it due to the weight and RWD.

Haven't got the front diff in?

What have you been doing all day!? Should have time tomorrow morning, yes?

11's will be nice......Good luck and may the boost be with you :thumbsup:

I will be watching this spot for a time slip closely :ninja:

I did 13.5 with 240kw, a low down throttle restriction and speed cut by 3/4 track. Hoping for a high 11 this time out but I doubt it due to the weight and RWD.

No point waiting, I couldn't get the thing to launch at all. Nearly 3 seconds for a 60 foot is a joke. The 1.06 has to go, time for the .63 rear perhaps?

I had overheating issues also, not just the water and trans fluids but the fuel was boiling too. It would just bog down and missfire off the line.

The trap speed was pretty good, 112mph (180kph).

I was definitely reeling the other cars in but they had me by 3 car lengths out of the hole.

Just tossing up between the .82 and the .63 rear housings as every other way around the problem involves making the car less drivable on the street. (other than going 3.5L :whistling: ) I really don't want to go to a 4k stall converter.

No point waiting, I couldn't get the thing to launch at all. Nearly 3 seconds for a 60 foot is a joke. The 1.06 has to go, time for the .63 rear perhaps?

I had overheating issues also, not just the water and trans fluids but the fuel was boiling too. It would just bog down and missfire off the line.

The trap speed was pretty good, 112mph (180kph).

so what was the 1/4 time? 0-100?

Wonder why it didn't launch well. Your old setup did ok didn't it?

You mean yours? :)

The turbo only makes 2 psi at stall and thats after holding my foot flat for a few seconds. Then it just bogs down. I need it to wheelspin off the line to have a chance hence I need the turbo to make full boost (or close to it) by 3k to match the stall converter. I knew this all along but I wanted to see what the 1.06 was capable of.

I ended up with a 13.9 but was going 141.3kph by 1/8th mile after the 2.8 second 60 foot. Only one timeslip as the tards lost the first one somehow. Thats .4sec worse than the last run, back on the highflow with 250kw, speed cut and throttle restriction. Power doesn't make it quicker unless you can launch it unfortunately.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...