Jump to content
SAU Community

Recommended Posts

martin has that killer ( i think ) option on his evo with a flick of the cruise button on comes the e85 tune thats gold i think 30psi is huge fairly sure martys wrx was doing plus 300kw on e85 at 21-22psi

again wicked work marty

subiefinaldyno.jpg

Edited by JETURBO
Link to comment
https://www.sau.com.au/forums/topic/372229-e85-fuel/page/8/#findComment-6446925
Share on other sites

My mate just bought a evo6 with only an exhaust and fuel pump, got steve knight to play around with it and made 250awkw on pulp. Steve did tune it on 30psi though haha, seems pretty high to me but i know nothing about evos.

Took my car to Steves just after I got it, asked him to check it out on the dyno and make sure its running ok

next day its running 25psi gone from 170kw to 220kw with just a cat back.. :laugh: although it wasn't the safest tune around, 30psi on 98 stock turbo is huge

Link to comment
https://www.sau.com.au/forums/topic/372229-e85-fuel/page/8/#findComment-6447224
Share on other sites

Evo6 wont sustain 30psi on a stock turbo. The turbo is nowhere near big enough to get it done. Take that as read ;)

30psi can be spiked through it low in the rpm range though, bend all the rods and get them to kick out the side of the block.

30psi is massive boost for any production petrol engine....good luck with it! :)

(Thanks Jet)

Link to comment
https://www.sau.com.au/forums/topic/372229-e85-fuel/page/8/#findComment-6447426
Share on other sites

  • 2 weeks later...

I can pretty much guarantee that there is no way in the world that turbo was running anywhere near 30psi. Anything over 25psi on a stock Evo turbo is pointless as you're only creating heat/stress for very little (if none whatsoever) gains.

My stock 2.0l engine/turbo Evo 6 makes a reliable 270awkw on 24.5psi with E-flex tuned by SKR. Thus far, it has been good enough for a string of 1:15's around Mallala and 1:04/1.05's around Wakefield Park. There's no chance the car would be making that much power and producing those lap times on 98. E-85 is my best power mod to date and if you haven't already done it, do it!

Link to comment
https://www.sau.com.au/forums/topic/372229-e85-fuel/page/8/#findComment-6464466
Share on other sites

  • 8 months later...
  • 2 months later...

Any more updates on places that sell it here in Adelaide ?

Any more places ?

Link to comment
https://www.sau.com.au/forums/topic/372229-e85-fuel/page/8/#findComment-6893567
Share on other sites

Pooraka have ran out twice on me before and once I had to wait half an hour for the tanker to move so that I could fill up. I keep 2 jerrys full at home now just in case

Link to comment
https://www.sau.com.au/forums/topic/372229-e85-fuel/page/8/#findComment-6894302
Share on other sites

  • 8 months later...
  • 5 weeks later...

Hi guys, im fitting new injectors and fuel pump soon to change over to E85, am i able to refill the tank with E85 and drive it to the tuner without making any ecu changes? or would it be better to run the new pump and injectors on 98 to get it to the tuner and let them change the fuel?

Link to comment
https://www.sau.com.au/forums/topic/372229-e85-fuel/page/8/#findComment-7246250
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...