Jump to content
SAU Community

Recommended Posts

Garrett GT3071R Kit forRB20/25

Product Information:

480HP Kit Includes

  • Garrett GT3071R-20 (700382-5020)
  • RB Turbine Housing (RB25-GT28)
  • Hi-Flow of Turbine Housing
  • RB Water/ Oil Kit
  • Silicon Reducer
  • Dump Stud Kit
  • Silicon Joiner
  • Hose Clamps
  • Spacer Plate
  • Gasket Kit
  • T/E Clamp Kit
  • Actuator 16psi
  • Actuator Bracket and Rod
  • RB Intake Pipe and Outlet Hose Kit

Price: $2638.00 inc GST

This kit?

-20 cart is not a GTX

Good price then, GTX's are typically going for a few hundred more than their GT cousins

Edit, while i'm in the thread:

As another rb25/3071 owner who had a hell of a lot of trouble with boost control in a Garrett IW .63 housing i would strongly recommend a .82 with a GTX if you are staying internal gate.

I would probably still go a .63 if i was doing an external gate setup in either GT or GTX 3071

Edited by badhairdave

Did you try Street to Track? Thats where I ended up getting mine, he gets bloody good prices from Garrett Aus or ATP in the US.

I agree, run the .82 rear. I have the 1.06 and im very pleased with the way it comes on but the .82 is the pick.

Uncontrollable boost through the midrange and top end with the .63 housing

Enlarged the wastegate port and flap as much as possible to try and bypass more. It was partially successful in that it could now limit boost to 1.2bar through the midrange but would actually blow open up top. I concluded that the fairly large area of the flap and highish manifold prssure was simply able to apply too much force to the flap for the small actuator.

So next was going to be a big can actuator to replace the small garrett one but instead i crashed the car into the tyres at a race track...pretty confident that it would have done the job, but spending an extra 500 to mod the housing on a brand new turbo and buy a new actuator is a bit much.

Was going to upload a photo of the modded housing by photobucket is being a bitch

No i didnt try them scotty thought the price that i got was reasonable so i ran with it and unfortunately ive already the .63 rear housing so im just gunna roll with the punches and see how it all goes still waiting on delivery though

Did you try Street to Track? Thats where I ended up getting mine, he gets bloody good prices from Garrett Aus or ATP in the US.

I agree, run the .82 rear. I have the 1.06 and im very pleased with the way it comes on but the .82 is the pick.

  • 2 weeks later...

Just thought id post a pic up of my GTX3071 next to a size 14 nikes and my hairy leg lol

Hey Mick_o, what rear housing have you got? And can you please take and post a pic of that small plate with turbo part number?

And that doesn't look like big can WG actuator.

Edited by Legionnaire

Nice shoes man, how much? :P

Now hurry up and get the turbo on the car and post results :)

Haha they were $220 mate i think and trust me im hangin to get it done not this weekend but the next me n jez are bolting her up and filling my tank up with e85! Yay!

Hey Mick_o, what rear housing have you got? And can you please take and post a pic of that small plate with turbo part number?

And that doesn't look like big can WG actuator.

I think its the .63 rear bolts up to standard dump ill post a pic up tomorrow but its a sonic rear housing and the badge on the housing is 803712-5001S( in small numbers) and below is 112101-11 (in bigger letters) can anybody tell me what size it is?

I think its the .63 rear bolts up to standard dump ill post a pic up tomorrow but its a sonic rear housing and the badge on the housing is 803712-5001S( in small numbers) and below is 112101-11 (in bigger letters) can anybody tell me what size it is?

numbers not letters lol im tired big week :( 88hrs of work

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seems like a decent result for a modded JZX110. They are bulky in comparison to the 100 and 90 models (which I'd prefer myself) but they are getting very few and far between here in JP these days. Thanks for the detailed review and the import process into the UK. I also have a car which I'm hoping to export from Japan at some stage so it's good to know if someone from the UK was interested in it. By the way the corrosion underneath is par for the course for cars which were located in/near the mountains or along the Japan sea coastline. They get huge amounts of snow every winter and the sodium chloride is used on the roads. Many cars have some kind of rubber like treatment underneath but they tend to limit it to the wheel arches underbody and fuel tank. Suspension arms and sub-frames will have similar corrosion to your JZX110 which is a common sight. See it all the time and car dealers here generally don't even mention it unless asked.
    • If the sound goes away when you clutch in, the 1.5/2 way diffs are just shit, and you are a normal person. The diff is likely "fine" but driving at anything under 30kmh is a violent horrible experience. It would be exaggerated with solid diff bushings and subframe bushings if you have those.
    • Trailer got new mudguards to accommodate the new wheels Lightweight ally Painted, stickered and done ✅ 👌  
    • Did you hit up the search function? R33 and greddy and cable returns this thread with some options.   https://www.sau.com.au/forums/topic/358214-rb25-throttle-body/
    • Thanks buddy.. the standard one needs to be about another inch or inch and a half longer. Thanks anyway
×
×
  • Create New...