Jump to content
SAU Community

Recommended Posts

So more to come.

Bought myself a greddy profec b spec 2 express from japan to replace my HKS evc 3.

All thats left to get is a gasket kit for the turbos. Leaning towards a genuine nissan kit from kudosmotorsport. Any suggestions for a gasket kit?

And thats about it. Now I just need to get the car in and get this ball rolling. Damn 2 weeks left to wait :S

genuine Nissan is always a good thing :thumbsup:

might be a good idea too do all bolts too

  • 3 weeks later...

Car went in on Friday. Scheduled for this Friday finish. I certainly hope so :S.

If all goes well, will be heading up to the blue mountains and have a bit of a drive with the gf.

And going to the drags on the 4th of April to see what she puts out. Hopefully stomping on my mates f6. Haha.

*UPDATE*

Watched my car get tuned yesterday from 2 - 6 haha. Was nice to see it get progressively better.

Run down as of yesterday:

1000cc ID injectors

Walbro 400lph

Greddy profec B spec II

Power FC

No name front pipe 2x 3" / 1x 3.5"

4" 100 cell cat

-9's

312kw 19psi

303kw 18psi

287kw 16psi

Yavuz did some more tuning this morning with the cold start and said the tune is coming up very nicely :)

Only problem, there is a little oil leak somewhere. If it isnt serious then the car will come back to me today. If it is serious well then Im sure I have bigger things to worry about.

Stay posted for what the deal is later today.

Oil leak sorted, one of the gaskets wasnt completely flat. Get my car back tomorrow :).

Hears a video of one of the pulls.

http://s1040.photobucket.com/albums/b406/jacquesvd/?action=view&current=IMG_0860.mp4

Edited by eat_me

Nice car... I approve of the Colour, the Rims and the mods hahaha I'm the same with my MNP 33 gotta love Twins... I have thought about single and if you want the power it is the way to go unless you want alot of lag... or just put VCT in ;):P

I got the car back today. f**k yeh. So glad I went -9's. They pull hard and all the way. Car is a response monster haha.

I can talk on and on about it. But I won't bore you guys.

I also got a npc sprung button clutch installed. Man it's a nice clutch to drive.

Sooo happy :).

I got the car back today. f**k yeh. So glad I went -9's. They pull hard and all the way. Car is a response monster haha.

I can talk on and on about it. But I won't bore you guys.

I also got a npc sprung button clutch installed. Man it's a nice clutch to drive.

Sooo happy :).

another satisfied -9 owner :thumbsup:

Damn straight. And their not even working hard to make the power.

It finally feels like a gtr. :).

You should become a rep for Garrett -9's. Haha

hahaha wait till you wake them up a bit more ;)

Mines going in for final tune tomorrow (well today) should be nice to see what they will do with 22-24psi with a built engine and cams :whistling:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So for the wide band is a Bosch 4.9 correct for the Link G4+ along with a Can bus? Just get the Link gear or is generic ok too? Eg here: LINK LINK DIGITAL WIDEBAND CAN MODULE WITH BOSCH 4.9 SENSOR : KYP Performance House  
    • Bit difficult to follow. Have a look below and see what the standard R32 layout was like. Note there was a restrictor in place immediately before "turbocharged pressure control solenoid" that, if removed, magically got you 1 bar boost.
    • I might be way off the mark here.. there must be a T junction under the manifold. That takes manifold pressure through a check valve prior to the T, one side splits out to this bleed off orifice, the other straight to the wastegate actuators. 
    • Carrying out some engine due diligence before my first drive in a 260RS that has been in storage for 10+ years, and found two lines that are susposed to be plumbed into the boost control solenoid. One of the lines (the wastegate boost supply line) to actuate the gates, had a bolt in one end blocking it. The other line (main boost signal line) from the very rear of the intake manifold (RB26DETT) and runs up to the boost controller had this pill in the end of it as seen in photos. Other than the obvious (T28 Ceramic turbos might well be cooked)  Can anyone shed any light on if there is any validity at all with this mod, bleeding a constant fixed rate of manifold boost pressure off through this 3mm hole?  Is it deliberate?  Was this a 90s Jap mod done to RB26's? Or has someone just fitted this without any idea of what happens to ceramic T28s if they are not gate controlled?    
×
×
  • Create New...