Jump to content
SAU Community

Recommended Posts

From what I know, you can't store more than one map in the ECU, I think Hamish carry laptop containing both 98 oct and E85 tune and transfering via PFC datalogit.

I'm sure Hamish will correct me if I'm wrong.

data logit wont work on a mac i dont think... fek..

go kill yourself kadir.

Can't switch tunes on PFC, need Data Logit or FC Hako - Paul will tell you more about this, or Google it. Be surprised if it doesn't work with Mac. Or just shell out $200 for a small/cheap laptop...

Yes. Just beat my PB at the Island from April by .5 of a second after being set back by a traumatic crash in October. In an exhausted state as well!

Now down to 1:46.3 oooooooh rah! Only ten more seconds to go :D

Congrats, maybe it was me and the supplements :P

data logit wont work on a mac i dont think... fek..

go kill yourself kadir.

Yeah, I think one of these macbooks with intel core can run mac/windows xp.

Can't switch tunes on PFC, need Data Logit or FC Hako - Paul will tell you more about this, or Google it. Be surprised if it doesn't work with Mac. Or just shell out $200 for a small/cheap laptop...

Might be a option.

BTW, is this at Dromana on the pics?

yeah you need winblows to run datalogit

and fc hako is a cable only solution, so you use the fc hako cable with datalogit or apexi's software

again all windows based

you could buy a crap old dell lattitude laptop off ebay for 200 with a true serial port and run win98

many people do that for car based serial connection thingies (i sold my datalogit kit with a dell win98 laptop)

yeah you need winblows to run datalogit

and fc hako is a cable only solution, so you use the fc hako cable with datalogit or apexi's software

again all windows based

you could buy a crap old dell lattitude laptop off ebay for 200 with a true serial port and run win98

many people do that for car based serial connection thingies (i sold my datalogit kit with a dell win98 laptop)

cool thanks..

i can install windows as a secondary system on the mac..

will i need the datalogt module to use it? or is it just a pfc to usb cable??

yep you can try running it inside an emulated windows

as long as it can speak to a serial port it should be fine

datalogit expects a serial port, and doesnt understand usb

so as long as whatever you use, appears as COM serial port, it will work (or should)

datalogit is software and a cable

fc hako is a cable

datalogit is software and a cable

depending on what software you try to use, will determine what cable you use

or vice versa

if you have an apexi legit cable, you must use their software

if you have datalogit cable, you can use datalogit

if you have an fc hako cable you can use any software

grant

as long as it (the pc or laptop or mac or windows or linux or solaris or beos) can speak to a serial port it should be fine

datalogit (and the others) expect a serial port, and don't understand usb

so as long as whatever you use, appears as COM serial port, it will work (or should)

datalogit ships with a USB cable and so does FC hako

but all that this cable does is provide a USB serial port

datalogit and apexi fc pro etc don't know native USB speak

they just assume its a COM serial port and hope for the best

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • They are, a good friend of mine bought one to replace his blow factory turbo, running a Toshi Tune reflash. Just use their supplied water/oil lines and you're good to go. At the time, they were like $900 delivered.
    • This is an option for 100% bolt on, the GCG high flow -  https://gcg.com.au/turbo-charger-upgrade-skyline-gtst-2iu-xtrgts-s1.html Also, I'm pretty sure hypergear does a high flow that is 100% bolt on, it just doesn't make as much power as their bigger high flows.  Even if you get a hypergear turbo that requires you to chance the intake piping, it is a really simple modification. It can be as simple as a piece of silicon hose and you pop a filter on the end. It doesn't have to be some crazy pie cut titanium work of art intake pipe.  If you have the ability to swap the turbo yourself, you would be able to sort the intake piping out. 
    • Just as a thought, if it's in neutral, thats your drive line disconnect, not the clutch. Clutch slip at the dyno with pedal fully out, is actually adding a second disconnect. So it's not a clutch issue if you're in neutral. Just a bit of friction dragging the output around while in the air.
    • The HG high flow is excellent, and costs about the $$ you're talking about. But it, and probably every other highflow, uses a diffeent core than the original turo, and the original Hitatchi core is quite long. So, I think it is inevitable that there is likely no such thing as a highflow that just "bolts on" with no other effort required. And the same is likely true for HG's outright replacement "bolt on" turbos (the ATR things). And the same is likely true for anything similar from elsewhere. I have no idea if the cheap Chinese/Taiwanese complete turbos from eBay/Temu/etc are as bolt on as they claim. I mean, they claim the bolt onto the NAs as well as the turbos, and we know that can't be "bolt on". But it wouldn't matter because I'm not buying a $169 4 psi turbo for anything other than a paddock basher.
    • Bummer...yeah i "need" something to "ease" up the work and for my driving it would be enough.    Iam counting the tune "without" turbo. I do not mean "cheap" like something from Temu around 200 USD, "Cheap" is something around 1000 USD? 
×
×
  • Create New...