Jump to content
SAU Community

Recommended Posts

Calder was pretty crap last night, got there at like 7 and only got 2 runs until 12.. (with a small dinner break).. around 300 cars there. First run was complete shait, left it in full auto performance mode with traction control off and span 1st 2nd 3rd off the line drifting next to the wall with a 2.7 60ft just let off.. 2nd run was a bit better 13.2 but hit limiter in 1st to 2nd which would of cost me that 12.

Until next time! will definitely be heathcote though. Less cars ftw. Probably enter in that tri battle thing - Ash you going??

Also met Grant down there in his R with a slipping clutch from looks of things :P

Not bad straight out the box!

Yeah pretty quick for stock I guess, I know it has 12 potential but just need more than 2 runs in my GTR I had like 10-12 runs and the last run was the quickest pretty much gained .3-.4 sec over the day. Probably should of taken some air out of the 19s and got rid of spare tyre but cbfed also had like halfa tank of fuel. Really want to get into the 12s at the SAU tri battle now :D

lol yeah that's fair quick for a standard car. Should get a sticker that says "bought not built" :D

Haha, the car would probably get keyed by a holden driver. I must admit its good not worrying about cops. I even did a few laps of prinny last night with racing numbers all over the car and burnt rubber on the rear guards.

Still not happy on the fact that fancy ford with warranty and reversing camera is faster than the mighty mythical japanese creature... tongue.gif

Time to whack Nismo Coppermix twin and milk some more power out of this thing. Smelt some burning on way home but no slippage, should be fine if I simply potter around the town.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Oh, also, forgot to add these photos I believe.
    • Thought i'd update on this. I was able to get in contact with Craig Lieberman and later on Darryl Alison (owner of Kaizo Industries). Darryl was able to help me verify that my car was in fact one of theirs and is helping me find more info on mine !
    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
×
×
  • Create New...