Jump to content
SAU Community

Recommended Posts

Spacers suck and there is no such thing as kinda flush or flush without touching guards

Do it right or don't bother doing it

No offence to you personally same goes to anyone

atleast i tried being nice lol

Have you 250cc boys considered changing your sprockets for a bit more grunt until you step up to a mid/litre?

No, never, not even for a second.

ah i see lol

well yeah that's what i was saying before then just loop it at the 3 in 1 unit and have both stand alone e/fan and the unit e/fan work together off the same switch. that's what we usually do anyway for people that want the 3 in 1 coz like you said the e/fan in the 3 in 1 unit is useless

Ah k, same page then. I'll either do that or just d/c the 3 in 1 fan as it won't really be needed...

haha no offense taken, i asked, after all :)

nah i was considering bolt on spacers, as sadly no mesos for just a different set of wheels with offset i can choose!

in regards to no guard-work, i sort of was asking if i did add spacers, would i have to do some guard work to make everything work or not, as opposed to getting away without doing any (although would've been cool/preferred if i didn't have to xD). but at the same time was expecting work has to be done, sorry i think i said it a bit misleadingly :P

Oh well, not sure how worthwhile it would be doing it to a 250, they probably have pretty short gears anyway and you might get sick of changing gears a lot. Would cost around $200 for the chain and sprockets to do it.

I'll be changing mine for one less tooth on the front sprocket soon. This will make me sit ~300rpm higher in top gear @ 100km/h, but I'll get faster acceleration and a more useful 1st gear (given 1st tops out at a ridiculous 167km/h).

haha no offense taken, i asked, after all :)

nah i was considering bolt on spacers, as sadly no mesos for just a different set of wheels with offset i can choose!

in regards to no guard-work, i sort of was asking if i did add spacers, would i have to do some guard work to make everything work or not, as opposed to getting away without doing any (although would've been cool/preferred if i didn't have to xD). but at the same time was expecting work has to be done, sorry i think i said it a bit misleadingly :P

anything more that what you've done will need a roll.

yea saw ya :P

Was going to wave, but was too busy changing gear and trying to work out if it was you... Just ended up being an awkward stare at each other moment.

picking up 16yr olds?

What do you think I was doing there?

Was going to wave, but was too busy changing gear and trying to work out if it was you... Just ended up being an awkward stare at each other moment.

What do you think I was doing there?

Yeah, when I see a white r33 I think it could be anyone at first thought it was my brother lol

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • LOL, all of the CAI like Craig I just need to put a hole saw through my bumper Done and dusted, the car runs, which is nice, I'll take it for a spin when the weather clears up Just need to put the bumper back on for good
    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
×
×
  • Create New...