Jump to content
SAU Community

Recommended Posts

How's the new job?

Yeah good, damn busy though with less than a month to the first deadline. Going well, and will get a lot of good experience. The train trips suck though.

My job doesn't allow me any SAU time. I know I don't have the 33 anymore but its a good community, too many douchebags everywhere else.

I sold my 33 back in 06 :D

Destroy VX SS in a rolling...he does loser fly by as I go heavy on the brakes and a VE SS playing catch up on us both flies through the 10 metre gap between us at ~150km/h, then nearly loses it around the upcoming corner, farkin nutjob!

did you go last year? i went this year effing loved it but it was my first time i had a ball at the stalls alone, but i reckon next year ill get pretty bored

I don't think this year was quite as good as last year. Not sure if I'll head up again in 2013 yet.

Destroy VX SS in a rolling...he does loser fly by as I go heavy on the brakes and a VE SS playing catch up on us both flies through the 10 metre gap between us at ~150km/h, then nearly loses it around the upcoming corner, farkin nutjob!

I'll go a rolling with ya in about a month :P

*on my private airstrip*

is it because Rota? or because you had stupidly stretched tyres over them which wouldnt take the shock of any potholes.

ive hit heaps of pot holes purely because i cbf going round. no issue with mine.

I've had two sets of Rotas, both have served me absolutely fine.

I'll go a rolling with ya in about a month :P

*on my private airstrip*

Screw rolling, I'll have my Nittos by then...we can do it off the line muhahaha. Dat 1st gear usability.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...