Jump to content
SAU Community

Recommended Posts

Still the daily

Power is very usable

Can plant it in 2nd and no wheelspin or sideways movement.

Tyres are just Nitto Invos

Sounds a lot more fun than my 2nd gear then :D.

It's good weather for boating today.

Miserable out there :(

I thought this just means free car wash? ;)

Haha should be a couple of hours plus bleeding etc. but anything can go wrong so it's one of those "how long is a piece of string" things

Thought so, mines getting fixed tonight since the old one decided to crack and spray coolant all over my engine. Thank you sir

Bike guys - chance of getting a RWC with an aftermarket exhaust and a fender eliminator?

Zero.

They tight as hell these days. Easy items to swap, but I'm guessing you don't have the stock parts...

Zero.

They tight as hell these days. Easy items to swap, but I'm guessing you don't have the stock parts...

Not at the moment, I should be receiving them, but who knows when that would be exactly

Would rear hugger qualify? or would it have to have been stock?

LOL!

I don't get your kW reading though... So at 4000 RPM it pushes 190 rwkW

So at what RPM does it push 280 rwkW?

Do you just chew through rear tyres in like half a year?

Yeah pretty much. Not even a year yet and got nt05s going on $375 a pop lol (275/19s)

Edited by UNR33L

Did you call that guy, Leigh?

Not at the moment, I should be receiving them, but who knows when that would be exactly

Would rear hugger qualify? or would it have to have been stock?

Should be fine. It's not that it all has to be stock, you can modify things, but fender eliminators aren't roadworthy and aftermarket exhausts break EPA rules (decibel limits).

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
×
×
  • Create New...