Jump to content
SAU Community

Recommended Posts

how do u stop it mid wobble.

Hang on for dear life until it stops...or...if you have the skill...before it gets really bad you can put on the throttle to try and take weight off the front wheel. Ideally try and lift the front wheel off the ground a touch.

Hang on for dear life until it stops...or...if you have the skill...before it gets really bad you can put on the throttle to try and take weight off the front wheel. Ideally try and lift the front wheel off the ground a touch.

That's pretty scary lol

Hang on for dear life until it stops...or...if you have the skill...before it gets really bad you can put on the throttle to try and take weight off the front wheel. Ideally try and lift the front wheel off the ground a touch.

By watching the professionals being thrown around like rag dolls when the bike wobbles, think I'll stick to my boat... too craaazzyyy for me!

Track time now brah

Hopefully towards the last quarter of the year. :thumbsup:

lol princess hwy is for the weak.

Actually never been...

Good.

Hey Aaron your GOR Map link is to a BP in Western Australia...

Either change it to the correct BP or increase the estimated cruise time to a week.

By watching the professionals being thrown around like rag dolls when the bike wobbles, think I'll stick to my boat... too craaazzyyy for me!

Haha but that rarely ever happens on the street. Gotta remember the pros are riding their bikes on the limits and they aren't the most user friendly machines. Bit like an F1 car...most people would spin out on the first corner pushing it hard!

Haha but that rarely ever happens on the street. Gotta remember the pros are riding their bikes on the limits and they aren't the most user friendly machines. Bit like an F1 car...most people would spin out on the first corner pushing it hard!

Dammit birds! Been convincing myself to stay away from bikes for a very long time now and you're not helping, and now that you've got a bike for sale.... :unsure:

Dammit birds! Been convincing myself to stay away from bikes for a very long time now and you're not helping, and now that you've got a bike for sale.... :unsure:

Go get your Ls anyway...don't have to buy a bike.

But I know you will.

Getting my car re-tuned next month, just wondering what sort of things will be worth getting checked-out before hitting the dyno?

ie. injector flow test, inspeact turbo? hell i dunno

make sure you have a stanceworks sticker, a catback exhaust and pod filter with no other engine mods, a stickerbombed quaterppanel, dick-tight jeans, $300 haircut, a vintage t shirt, airbag suspension and lay frame on the dyno brah.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Oh, also, forgot to add these photos I believe.
    • Thought i'd update on this. I was able to get in contact with Craig Lieberman and later on Darryl Alison (owner of Kaizo Industries). Darryl was able to help me verify that my car was in fact one of theirs and is helping me find more info on mine !
    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
×
×
  • Create New...