Jump to content
SAU Community

Recommended Posts

got moonface superlap tie rod ends delivered today.
ordered them last wednesday via jdmconcept and they imported them and got them to me in 1 week!

very happy with that!

i couldnt if i tried lol probably book in for racepace when i have everything as they did a good job last time, then ill take it to either shane or someone for a decent alignment.
i still have alot of parts to come - the moonface tie rods which are needed for the tie rod ends are still on the way

i couldnt if i tried lol probably book in for racepace when i have everything as they did a good job last time, then ill take it to either shane or someone for a decent alignment.

i still have alot of parts to come - the moonface tie rods which are needed for the tie rod ends are still on the way

No power mods?

not at this stage, i have to admit ive always done handling mods instead of power - though i have a big list of parts im working towards, turbos and ecu are pretty high on that list too :P

i couldnt if i tried lol probably book in for racepace when i have everything as they did a good job last time, then ill take it to either shane or someone for a decent alignment.

i still have alot of parts to come - the moonface tie rods which are needed for the tie rod ends are still on the way

Ok cool!

Yeah Shane does good wheel alignments.

not at this stage, i have to admit ive always done handling mods instead of power - though i have a big list of parts im working towards, turbos and ecu are pretty high on that list too :P

Need moar powah.

Just sayin

hmmm.... handling and power mods, I seem to do one of each and just take turn.

Did you do anything about it? Contact the seller and rock up?

Nah, was told by the cops to not contact them as they will and not to do anything else.... was tempted to rock up.

btw anyone felt weird or naked while sau server was down??? Maybe it's just me.

yeah i would load up sau and realise it was down and was pretty much 'f**k what do i do now'

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
    • Thanks for the replies everyone. Definitely a coolant push. Oil catch can is empty and always has been. As the engine is out now I'll be having a good look over things. I do have some detonation on the piston tops from a trigger issue back about 5 years ago. I felt it and shut off then bought a new ecu and changed the trigger. Never been an issue since. It never hurt the power, its made almost 80hp more since that incident but I will pull the bearing caps to take a look. If the bearings are damaged I will do a bottom end refresh. Head is being re conditioned at the moment and the block will be cleaned and checked to ensure it's flat. I'll go with a kameari gasket and see how it ends up. The other thing I'm not super keen on is the cylinder colours. I suspect this is from the inlet manifold. The plan will be to put it back together, retune and then stick a plazmaman billet inlet on it and retune. I'm happy with the power, if it makes a little more, then great, but I would rather just make everything more efficient at this stage.
    • Maybe they'll look to do a bunch of presales to help inject some cash fast for their financial issues...
    • Does it also misfire equally when revving?   Josh is very correct in what you should do. The coilpack harness wiring loom itself is a known problem due to its age and the number of heat cycles it has gone through. Throwing parts at a vehicle to diagnose the issue isn't a smart or good way to do it. Secondly, you may have a bad coil pack, you pop replacements in, they fix that issue, but messing with the harness breaks it, so the issue persists. So now you think "well it wasn't the coil packs" and have to continue chasing your tail, potentially swapping back in your shit coil packs and returning the good ones (yes, I've seen people do this because 'it wasn't the problem' and they want to save money). And suddenly, you've got two issues with the same symptoms...   Diagnose, don't use the spare parts shotgun.
×
×
  • Create New...