Jump to content
SAU Community

Recommended Posts

no you dont, all you need is a thermometer, hot water and an esky ;)

sous-vide almost all my red meat and a lot of other stuff at home, and I dont have a controller

Nah, would be less... even with the capability to have that much power they will provide a detuned engine that can handle any fuel that idiots put in it, and then increase the output by like 5kw with each new model

What kind of temperatures do you need to keep it at? Could you use one of those home brew kits?

no you dont, all you need is a thermometer, a straw, zip tie freezeer bags, hot water and an esky ;)

I sous-vide almost all my red meat and a lot of other stuff at home, and I dont have a controller

Nah, would be less... even with the capability to have that much power they will provide a detuned engine that can handle any fuel that idiots put in it, and then increase the output by like 5kw with each new model

http://www.carsguide.com.au/news-and-reviews/car-news/hsv_supercharged_v8_tipped_to_top_w427

I cook most meat at 58c as per MY digital thermometer, and it comes out perfect every time, although my thermometer is pretty mangled as I have dropped it in the sousvide bath about 10 times and into a pot of 175c oil whilst deepfrying...

I usually get my steak from the vic market, leave it in the fridge until dinner and then throw it straight in a HOT griddle pan for like 60 seconds on each side to get some caramelisation on there, then throw it into some ziplock bags, suck out all the air with a straw and lock quickly.

drop it into the esky with the bag jammed in by the lid to hold the meat near the top of the water. set a timer for 45 - 60 mins and go watch tv or cook the other dinner bits

come back an hour later and chuck the bag on the bench to cool a little. and let the protien strands relax

cut the meat against the grain and throw on the plate with whatever sauce and sides I have made.

100% perfect medium rare rump steak that is as tender as all hell... every time

even the 427 would have only been say 300-320rwkw TOPS

I dont think it will be beating leigh's 370rwkw in a hurry, and it will be the TOP model @ $100k +

these are only guesses ofcourse

Also rwkw != manufacturer stated fly kw...

427 cubic inches = 7.0L

Bitch plz I could make 320rwkw with a few little mods to my little 2.5L ;)

mmmm but jelly of dat torque and power band... Super charged dyno graphs are boring... may as well go look at a wall, it's almost as flat.

inb4 leigh invites me to prinny...

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...