Jump to content
SAU Community

Recommended Posts

Apparently the 285 18 Achilles 123s are better bang for buck and cheaper than 265/35/18 Federal RSR.... AND they're about the same width because RSR's are wider than 265's should be so will fit under by rear end without needing to roll any guards?

Thoughts? Comments? Which tyre should I go for now that I've decided to do Winton on the Friday before DECA in Nov?

Edit: Just need the 2 rears, 18x9.5 (can't remember the offset...) since I've still got enough RS-R on the front to last a few days.

I was speaking to Richo a few weeks ago about this

He is under the impression the compound has changed for the RS-R's now so they are now crap

Better go the Achilles 123s

I might have some new Hankook Rs3's you could use for cheap if you want lol

What size are the RS3's toby? PM me a price? Y U no use them and how are they on the street / track?

I'll PM yah

Rs-3's are a 265/40/18

Good enough tyre to win 1st, 2nd & 3rd at the 2012 WTAC clubsprint class

inb4 Richo takes a podium this year in his Advans :P

Apparently the 285 18 Achilles 123s are better bang for buck and cheaper than 265/35/18 Federal RSR.... AND they're about the same width because RSR's are wider than 265's should be so will fit under by rear end without needing to roll any guards?

Thoughts? Comments? Which tyre should I go for now that I've decided to do Winton on the Friday before DECA in Nov?

Edit: Just need the 2 rears, 18x9.5 (can't remember the offset...) since I've still got enough RS-R on the front to last a few days.

well Trent certainly thinks they are good bang for buck

this is the stash for WTAC

1380005_523288204431330_1730887799_n.jpg

ahh... pfft sif tyres matter in drift :P

track day at winton after a drift day was the worst. debris and shit everywhere. im surprised they would a drift comp before a time attack. probably brings more crowd/sponsors

ahh... pfft sif tyres matter in drift :P

track day at winton after a drift day was the worst. debris and shit everywhere. im surprised they would a drift comp before a time attack. probably brings more crowd/sponsors

they matter more for cat in drift with her 700hp twin turbo V8 than they do for you in grip with your 6.3kw shopping trolley if that's what you are asking :P

Speaking of tyres, I need some before DECA.

How bad is it to have tyres laying outside for many months through winter and using them?

Just drop the front shaft and do skids.

ahh... pfft sif tyres matter in drift :P

track day at winton after a drift day was the worst. debris and shit everywhere. im surprised they would a drift comp before a time attack. probably brings more crowd/sponsors

Drift comp was after time attack last year

Anyone heading up this weekend?

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...