Jump to content
SAU Community

Recommended Posts

who the f**k said too much power? power was the same to within 5kw between our cars, his was all in by like 2000 RPM doe...

people underestimate just how much extra displacement that 0.5l is... it's 20%

who the f**k said too much power? power was the same to within 5kw between our cars, his was all in by like 2000 RPM doe...

people underestimate just how much extra displacement that 0.5l is... it's 20%

For me I'll be simulating my litre motorbike, which just had oodles of power everywhere, but most importantly in the low and mid range where big bore short stroke engines usually suffer

And for that matter it's pretty much the same discussion as 600s versus 1000s - they both fast as each other when they are on song and most people can ride a 600 better than they can ride a 1000. But on the road, in traffic, in higher gears, that low end torque is blissfully awesome!

I'd also rather be able to boost in 4th and 5th at cruising RPMs

But yeah we'll see

An interesting dyno graph it will make

Old mate from facey pm'd me about that forged RB26...it's a brand new rebuild with receipts...could be tempted if it saves me a few grand on the RIPS VL. Will see what's wrong with current RB first.

Old mate from facey pm'd me about that forged RB26...it's a brand new rebuild with receipts...could be tempted if it saves me a few grand on the RIPS VL. Will see what's wrong with current RB first.

Just put 20w/50 oil in and she'll be right.

Old mate from facey pm'd me about that forged RB26...it's a brand new rebuild with receipts...could be tempted if it saves me a few grand on the RIPS VL. Will see what's wrong with current RB first.

receipts for the $350 pistons... great...

  • Like 1

anewwotm8?

Tell Chris to check his emails!

Previous owner has had it running with the knocking, you've driven it with the knocking. High chance that the crank can't be salvaged. Sure, it could be... but theres definitely better odds that it won't be!

  • Like 1

Guess I'm hoping for the chance it's something in the valve train like a bent valve or something.

Will also give a chance to suss out anything else I need to acquire, like a new head for example.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • They are under bucket shims. Tomei provides a test shim kit and then any measurement of shim required. 
    • I always wondered how you were supposed to buy a set of 24 buckets and somehow magically have every single one of them yield exactly the desired clearance. I would have thought you'd need to assemble a cam with either 12 "sample" or "example" buckets of known top thickness (or a single such sample/example 12 times over!!) measure clearances at every valve, and then do the usual math to work out what the actual "shimness" of each bucket needed to be, before buying the required buckets to make up he thicknesses that you didn't have on hand.
    • I now seem to be limited in power due to my rev limit/hydraulic lifters in my built RB25. I'm looking into converting over to Tomei solid lifters. Question for anyone that has done the conversion. I was always under the impression that when using the Tomei solid lifter conversion, you would also require new valves (Longer or shorter stems, I can't remember which).  I don't know where I got this idea, as so far I see no mention of this in any of the Tomei documentation. It just states I need the Tomei solid buckets, solid lifter cams and upgraded springs. As my head is already built, all I would need is another set of 1000$ Kelford cams, 500$ buckets and about 4H hours of my time installing and I'm off to the races!?!? There's no way it's that simple, I must be missing something? 
    • I couldn't agree more. I should have started from the get-go with a NEO or solid bucket conversion. I started looking into converting over to solid lifters yesterday. Now for some reason I was always under the impression that when using the Tomei solid lifter conversion, you would also require new valves (Longer or shorter stems, I can't remember which).  But I see no mention of this on any of the Tomei documentation. It just states that I need the Tomei solid buckets, solid lifter cams and upgraded springs. As my head is already built, all I would need is another set of 1000$ Kelford cams, 500$ buckets and about 4H hours of my time installing and I'm off to the races!?!? There's no way it's that simple, I must be missing something? 
    • BRUH, one of the biggest mistakes of my life..... and i've had plenty ;[)
×
×
  • Create New...