Jump to content
SAU Community

Recommended Posts

Surely not as grueling a task as running cables provided it's safe, as in not to hot or to wet or to windy or after 4.00pm or every second Monday!

amiright?

pls dont bash me i just like to stir the pot

I would LOVE to see you on one of the cable pulls we do on a regular basis.

The heat off rule seems to be one of the go to things for you anti union guys, but you don't seem to mention that we have to wear full length clothing, as well as gloves hard hat and glasses, covering pretty much every area that heat escapes your body... How often does it hit 35 before 3pm anyway? It's a very rare occurrence, which means those days where it's 34.9 for most of the afternoon, we sweat it out in the heat.

Rained off rule is even rarer. I'm yet to be rained off a job in almost 4 years.

We pay for our RDOs so another great point there...

Still paying to learn

The only reason undergraduates (except arts students, they don't count) enrol in uni is the prospect of a good job down the line or entering an industry that requires it

It's a sacrifice up front and a shit one at that, made worthwhile if you see a good job from it but plenty don't and come out the other end with a low interest debt

Coz our job is guaranteed yeah... People get sacked in our industry on a regular basis. But I'm sure the media has told you the union protects us against that..

Don't understand those people that study a subject where there's only a handful of jobs throughout Australia lol

Then they work at flight centre on 40k pa and slowly pay off their uni debt :\

  • Like 1

Don't understand those people that study a subject where there's only a handful of jobs throughout Australia lol

Then they work at flight centre on 40k pa and slowly pay off their uni debt :\

Then piss and moan about it after the fact.

A courier isn't exactly qualified or skilled... Nothing against them, we can't all be brain surgeons, but it's unskilled work nonetheless.

I don't get the point of everyone telling me about all these hard and underpaid occupations/careers. They're underpaid, they choose to do nothing about it and cop it while their boss/employer takes home the cash. Unions allow workers to not just be bent over and f**ked in the ass by greedy employers and builders in my industry. They also put a big focus on safety, for real not just the shit you guys seem to think you know about, without having actually worked in construction.

My mate did full time uni to be a high school teacher... He worked pretty much the same hours I did at the time. Half day of classes on a Wednesday and optional tutorial or lecture or something on one other day of the week... Hardly a gruelling task.

..lol..says there is no skill but no doubt complains when his parcel is late or damaged...

I'll admit its not brain surgery, but it takes skill to be good at anything...

I have no problem with unions, infact I wish we had one...but tell me, when the transport industry becomes unionised and all our costs increase dramatically to cover all the costs and this eats in to your profits...Will you be happy to pay the price? Somehow I doubt it or you would all be using Linfox...not the other guys...

I can wire up an electrical plug, its not hard...give me a diagram and all the equipment I am sure I could wire up a whole house...Am I allowed to, No...because I might f**k it up and that is dangerous...Yet I see people drop shit in the road all the time because they didn't tie it down properly..So why is it perfectly legal for people Transport their own stuff when they clearly have no idea what they are doing?

I hate unionised transport drivers.

We had some douchelord deliver some goods to a restaurant I worked at.

He or them down on the floor in the middle of the restaurant because there was 2 steps there. When the owner asked if he could put the stuff a few metres away where customs wouldn't trip on it he replied with

"My EBA states I only have to climb 2 steps and there is one step at the doorway so that makes 3."

I'm not even f**king kidding

  • Like 1

Direct Freight did a delivery here to work yesterday.

Driver backs his truck up to our roller door, swings open the back and jumps in... I spot that all the random boxes are sliding around and diagonal like they were stacked up and have fallen.

Give me a box which had a corner collapsed in, said it was like that at pickup...

I sign for it, he then goes to gather the dozen (1-2 foot sized) boxes from the truck floor and literally throws them half the length of the truck (4m) from a 50cm height so they are closer to the back door. Then he stacks them 2 high in front of the door.

I understand that truck drivers are technically "professional" drivers, but a lot of them can only claim that because they do it for a "profession".

There are some good ones out there, but there's some serious knobs out there as well.

Don't throw items around in front of a customer, or at all.

I would LOVE to see you on one of the cable pulls we do on a regular basis.

The heat off rule seems to be one of the go to things for you anti union guys, but you don't seem to mention that we have to wear full length clothing, as well as gloves hard hat and glasses, covering pretty much every area that heat escapes your body... How often does it hit 35 before 3pm anyway? It's a very rare occurrence, which means those days where it's 34.9 for most of the afternoon, we sweat it out in the heat.

Rained off rule is even rarer. I'm yet to be rained off a job in almost 4 years.

We pay for our RDOs so another great point there...

Coz our job is guaranteed yeah... People get sacked in our industry on a regular basis. But I'm sure the media has told you the union protects us against that..

The heat / rain / RDO stuff is fair. Helps that I like you though..

I wonder how many of those people sacked face that outcome because the employer can't afford the wages that result from union bully tactics (or if they are genuine flogs who hide behind the union and try to blend in with the decent blokes like dezz)

So in the name of safety, lets unionise the transport industry so I dont get ripped off by my employer (which is you btw)...then make it impossible/illegal for anybody to transport goods without the appropriate tickets/qualifications...

Then...

Lets extort this by charging ridiculous amounts of money to transport goods....muhahahha..

Cwatididthar ;)

Edited by ARTZ
  • Like 2

Don't understand those people that study a subject where there's only a handful of jobs throughout Australia lol

Then they work at flight centre on 40k pa and slowly pay off their uni debt :\

Usually those studying engineering

Its not just academic scores, its real world and people skllls they also seem to lack

  • Like 1

Direct Freight did a delivery here to work yesterday.

Driver backs his truck up to our roller door, swings open the back and jumps in... I spot that all the random boxes are sliding around and diagonal like they were stacked up and have fallen.

Give me a box which had a corner collapsed in, said it was like that at pickup...

I sign for it, he then goes to gather the dozen (1-2 foot sized) boxes from the truck floor and literally throws them half the length of the truck (4m) from a 50cm height so they are closer to the back door. Then he stacks them 2 high in front of the door.

I understand that truck drivers are technically "professional" drivers, but a lot of them can only claim that because they do it for a "profession".

There are some good ones out there, but there's some serious knobs out there as well.

Don't throw items around in front of a customer, or at all.

Well if you read what I said you would realize it is because they don't get paid enough to care...

I don't get the point of everyone telling me about all these hard and underpaid occupations/careers. They're underpaid, they choose to do nothing about it and cop it while their boss/employer takes home the cash.

Because we remember back a couple of years to when you used to sook about pay/working when taking home properly good money for an apprentice.

post-36777-14241430157531_thumb.jpg

Because we remember back a couple of years to when you used to sook about pay/working when taking home properly good money for an apprentice.

Unlikely champ. I knew from day one I was on good money. The very reason I chose commercial over being ass raped for $300 gross a week in domestic.

I hate unionised transport drivers.

We had some douchelord deliver some goods to a restaurant I worked at.

He or them down on the floor in the middle of the restaurant because there was 2 steps there. When the owner asked if he could put the stuff a few metres away where customs wouldn't trip on it he replied with

"My EBA states I only have to climb 2 steps and there is one step at the doorway so that makes 3."

I'm not even f**king kidding

At the same time I read this I picked up a job that requires me to hand unload 130 boxes to Carlisle homes..Now off I am lucky there will be some fit bored bloke there willing to help...chamces are it will be some hot sales chick who wont lift a finger and she will expect me to haul them up to the second floor and pit them.on the top shelf in the backroom...If I am lucky she might even offer me a drink...

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Next on the to-do list was an oil and filter change. Nothing exciting to add here except the oil filter is in a really stupid place (facing the engine mount/subframe/steering rack). GReddy do a relocation kit which puts it towards the gearbox, I would have preferred towards the front but there's obviously a lot more stuff there. Something I'll have to look at for the next service perhaps. First time using Valvoline oil, although I can't see it being any different to most other brands Nice... The oil filter location... At least the subframe wont rust any time soon I picked up a genuine fuel filter, this is part of the fuel pump assembly inside the fuel tank. Access can be found underneath the rear seat, you'll see this triangular cover Remove the 3x plastic 10mm nuts and lift the cover up, pushing the rubber grommet through The yellow fuel line clips push out in opposite directions, remove these completely. The two moulded fuel lines can now pull upwards to disconnect, along with the wire electrical plug. There's 8x 8mm bolts that secure the black retaining ring. The fuel pump assembly is now ready to lift out. Be mindful of the fuel hose on the side, the hose clamp on mine was catching the hose preventing it from lifting up The fuel pump/filter has an upper and lower section held on by 4 pressure clips. These did take a little bit of force, it sounded like the plastic tabs were going to break but they didn't (don't worry!) The lower section helps mount the fuel pump, there's a circular rubber gasket/grommet/seal thing on the bottom where the sock is. Undo the hose clip on the short fuel hose on the side to disconnect it from the 3 way distribution pipe to be able to lift the upper half away. Don't forget to unplug the fuel pump too! There's a few rubber O rings that will need transferring to the new filter housing, I show these in the video at the bottom of this write up. Reassembly is the reverse Here's a photo of the new filter installed, you'll be able to see where the tabs are more clearing against the yellow OEM plastic Once the assembly is re-installed, I turned the engine over a few times to help build up fuel pressure. I did panic when the car stopped turning over but I could hear the fuel pump making a noise. It eventually started and has been fine since. Found my 'lucky' coin underneath the rear seat too The Youtube video can be seen here: https://www.youtube.com/watch?v=uLJ65pmQt44&t=6s
    • It was picked up on the MOT/Inspection that the offside front wheel bearing had excessive play along with the ball joint. It made sense to do both sides so I sourced a pair of spare IS200 hubs to do the swap. Unfortunately I don't have any photos of the strip down but here's a quick run down. On the back of the hub is a large circular dust cover, using a flat head screw driver and a mallet I prised it off. Underneath will reveal a 32mm hub nut (impact gun recommended). With the hub nut removed the ABS ring can be removed (I ended up using a magnetic pick up tool to help). Next up is to remove the stub axle, this was a little trickier due to limited tools. I tried a 3 leg puller but the gap between the hub and stub axle wasn't enough for the legs to get in and under. Next option was a lump hammer and someone pulling the stub axle at the same time. After a few heavy hits it released. The lower bearing race had seized itself onto the stub axle, which was fine because I was replacing them anyway. With the upper bearing race removed and the grease cleaned off they looked like this The left one looked pristine inside but gave us the most trouble. The right one had some surface rust but came apart in a single hit, figure that out?! I got a local garage to press the new wheel bearings in, reassemble was the opposite and didn't take long at all. Removing the hub itself was simple. Starting with removing the brake caliper, 2x 14mm bolts for the caliper slider and 2x 19mm? for the carrier > hub bolts. I used a cable tie to secure the caliper to the upper arm so it was out of the way, there's a 10mm bolt securing the ABS sensor on. With the brake disc removed from the hub next are the three castle nuts for the upper and lower ball joints and track rod end. Two of these had their own R clip and one split pin. A few hits with the hammer and they're released (I left the castle nuts on by a couple of turns), the track rod ends gave me the most grief and I may have nipped the boots (oops). Fitting is the reversal and is very quick and easy to do. The lower ball joints are held onto the hub by 2x 17mm bolts. The castle nut did increase in socket size to 22mm from memory (this may vary from supplier) The two front tyres weren't in great condition, so I had those replaced with some budget tyres for the time being. I'll be replacing the wheels and tyres in the future, this was to get me on the road without the worry of the police hassling me.
    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
×
×
  • Create New...