Jump to content
SAU Community

Recommended Posts

i just pay for my work with handies. i thought you did the same??

im still paying off the motor and suspension

A pulsar modification being paid for with man on man sexual favours

surprise factor : 1/10

  • Like 3

Have all you real estate agents got access to land prices in a new development?

Has it been strata titled? i.e. are the individual blocks recognised with thier own certificate of title or is it still proposed?

something i find about workshops (unless mainly in-out services) is that they never say no to work. even if they have like a queue of cars in the workshop waiting to be worked on.

i understand how a lot sort of wait on parts, or people busy working on the longer projects... but lots of places we see have like 2-5 people working and theres like 20 jobs on the go, with more coming in than they can finish.

im not saying i would do a better job managing a shop, and i understand there are quiet periods, but fark it would annoy me having people on your back about work not being started or finished yet.

Second you start turning people away word spreads real quick, or they go to your competition instead

Same deal with quoting...you can over quote to keep customer happy come bill time, but risk sending them to competitor who under quotes and ends up with a shitty customer...but who got the work

Waiting for parts is another good reason - if you only have 5 jobs in the door all waiting on parts, you have a workshop full of hot sweaty men with nothing to do, which isn't a boss' wet dream...unless the boss drives...wait for it...a pulsar

  • Like 1

should I ask why?

I have been known to run to some training courses in the past but it really depends on what the customer is looking for

i'm going for a job that implements software and does a fair amount of training as well.. it's not really the direction I'm looking for long term but I might like it and pays decent / foot in the door..

was just asking to see how you found it?(it's medical software)

Edited by UNR33L

Has it been strata titled? i.e. are the individual blocks recognised with thier own certificate of title or is it still proposed?

They've got a land sales office, and are already selling blocks so I'd say it's all ready to go...

value will be determined by the surrounding sales i'd imagine.... if you want to get in on the ground level I'd suggest getting Al to look into it ASAP

I don't wanna buy one, I just wanna know what they're selling for so I know what mine is worth.

I could go in there and find out, but I'm trying to avoid dealing with the sales dicks at all costs.

i'm going for a job that implements software and does a fair amount of training as well.. it's not really the direction I'm looking for long term but I might like it and pays decent / foot in the door..

was just asking to see how you found it?(it's medical software)

I don't mind training itself hell I love being center of attention.

I hate writing the training courses however. the product I deal with most I am the top guy globally for it, so everything falls to me and every training course is different as every implementation is different.

ask yourself if you got a rush from giving presentations at school that will give you an idea if you will like training.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...