Jump to content
SAU Community

Recommended Posts

Where'd you get those from?

I'd love to piss off the neighbours with loud music while I'm away on holidays

I have a remote control power board but don't use it to full advantage

Where'd you get those from?

I'd love to piss off the neighbours with loud music while I'm away on holidays

I have a remote control power board but don't use it to full advantage

Belkin wemo switch. Dicksmith had an online sale.

Can also write rules with IFTTT

On another note bought some wifi-controlled electrical outlets.

Can switch on the heating before I arrive home.

#Homeowner 2.0

Got mine auto setup to turn on an hour before I get up, then turn off as I leave, its mad.

Dem gas bills doe, suppose electric ones are better bang for buck?

Edited by UNR33L
  • Like 1

I switched from Gas to Elec heating this winter... will update when bill arrives

so far gas bill has arrived and dropped from $46 to $29 per fortnight (bill smoothing)

if the Elec doesn't increase by more than $17 per fortnight then I declare elec the winner

Got a $100 rebate on my last waterbill.

No idea why...

Googled it and there's a whole bunch of rebates you can get for energy efficient washing machines etc. Can claim up until September for rebates effective until June 30th.

How you supposed to know about this?

Got a $100 rebate on my last waterbill.

No idea why...

Googled it and there's a whole bunch of rebates you can get for energy efficient washing machines etc. Can claim up until September for rebates effective until June 30th.

How you supposed to know about this?

will look into this....

i'm shitty at my water company so I would love to claim a rebate and I have a new washing machine and dishwasher

Any of these:

Product information Type of water saving product you are claiming (refer to brochure or visit www.water.vic.gov.au for further information) Basket of Goods – $30 Tank to Toilet Connection – $500 Water Audit – $50 Permanent Greywater System – $500 Dual Flush Toilet – $100 Rainwater Tank Rebate – $850 or $1300 or $1500 Pool Cover with roller/wheel – $200 Hot Water Recirculator – $150 Showerhead – $10 or $20 Washing Machine – $150 (5 star water & 4 star energy rated)

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...