Jump to content
SAU Community

Recommended Posts

My gtx 2860s with 33 compressor housings are done... And I can't pick them up for 2 weeks. Oh well, let the suspense continue!

just as I'm about to buy 2 GTX2863 cores!!

I might wait n see how you go lol

if those 60s hit at least 420 430kw with those oe housings I'm so doing it.

Edited by mr skidz

You may have to wait a while, they shall be going onto the shed shelf at first as I'm doing a road trip to Victoria for 3 weeks straight after i get back.

But yeah as above the 60s should indeed flow a tad more than -5s.

60's would want to hit 420 rwkw considering it's not too hard to do that on bog stock -5's on E85 but without the brain damage.

brain damage?

That's carrying on a bit isn't it?

He's using a .42 compressor cover not a .60 one, we've been through this before haven't we?

Pete's obviously after better spool then dash fives and better response with Power close to a dash 5 or better.

-5's in the .42 compressor cover didn't do 420kw in a .42 comp cover!

Max boost only saw 383kw,

but you expect a lot from a GTX2860 combo that's never been done before and documented?

Let's just praise Pete for actually giving it a go regardless of the result it will spool good.

Here's the pic of the 383kw -5 in .42 compressor cover.

post-60000-14442042996084_thumb.jpg

Mmm, 30psi by 4500rpm.

For reference, when you say custom intake piping, you mean the standard gtx anti surge covers with piping made up to suit them?

Yes thats correct. Custom inlet piping to replace the OEM setup.

Can you see a reoccurring theme here?

You put bigger wheels into smaller housings and they fail. Simple as that!

Hate to break it to you guys but billet GTX wheels aren't the magic cure for the issues that plague the stock configuration like you are dreaming up. Look at Gavin here he's ditched the factory plumbing and "HEY PRESTO" hello to some response & power! Garrett obviously put these compressor wheels into these comp covers for a reason don't you think?

But the big issue which you keep overlooking is the turbine housings. GTX wheels require higher pressure ratios to make the power over the old GT series its well documented and i have experienced it 1st hand with my own GT-GTX experience. Now how do you get your turbine to keep up with your magic billet compressor wheel???

Let me answer that for you just in case you're unsure? ;)

YOU CANT WITH THE FACTORY GTR REAR OR -5 REAR THE GTX WHEELS OUT FLOW THOSE TURBINES!!!

brain damage?

That's carrying on a bit isn't it?

He's using a .42 compressor cover not a .60 one, we've been through this before haven't we?

Pete's obviously after better spool then dash fives and better response with Power close to a dash 5 or better.

-5's in the .42 compressor cover didn't do 420kw in a .42 comp cover!

Max boost only saw 383kw,

but you expect a lot from a GTX2860 combo that's never been done before and documented?

Let's just praise Pete for actually giving it a go regardless of the result it will spool good.

Here's the pic of the 383kw -5 in .42 compressor cover.

Edited by Mick_o

Can you see a reoccurring theme here?

You put bigger wheels into smaller housings and they fail. Simple as that!

Hate to break it to you guys but billet GTX wheels aren't the magic cure for the issues that plague the stock configuration like you are dreaming up. Look at Gavin here he's ditched the factory plumbing and "HEY PRESTO" hello to some response & power! Garrett obviously put these compressor wheels into these comp covers for a reason don't you think?

But the big issue which you keep overlooking is the turbine housings. GTX wheels require higher pressure ratios to make the power over the old GT series its well documented and i have experienced it 1st hand with my own GT-GTX experience. Now how do you get your turbine to keep up with your magic billet compressor wheel???

Let me answer that for you just in case you're unsure? ;)

YOU CANT WITH THE FACTORY GTR REAR!!!

judging by your comments you don't know much.

Go back like 10 pages re read.

Edited by mr skidz

I'll do it for you.

SIMONS R34

*Std inlet pipes

*Std cooler

What SHIT were you saying again?

You should know your shit before posting garbage it misleads people that don't know better.

LMFAO!

post-60000-14442109517252_thumb.jpg

Edited by mr skidz

Lol what does that prove? Clearly you know f**k all as there was nothing misleading in what i said so LMFAO ;)

Pauls -5 results beat that so whats ya point? As good a result as it may be its not setting the world on fire nor is it proving that the effort gone into f**king around with GTX's to bolt on is worth while. In fact it makes my point very valid because shitty old -5's still beat it!

Who said anything about winning races? You are the 1 who posted up a graph telling me i didn't know SHIT & that im posting misleading information yeah? You posted a graph of 88lb GTX turbos running 33psi of boost & then i mentioned a set of 72lb GT turbos running 28psi making more power. Can you see where im going with this?

Hate to break it to ya mate but i setup cars for a living and have been working in 1 of the most reputable shops in this land/ possibly in the world who sell parts globally and setup the worlds fastest time attack cars. So im not just some internet muppet staring at graphs making assumptions talking shit via a keyboard.

Whats your claim to fame?

Who said anything about winning races? You are the 1 who posted up a graph telling me i didn't know SHIT & that im posting misleading information yeah? You posted a graph of 88lb GTX turbos running 33psi of boost & then i mentioned a set of 72lb GT turbos running 28psi making more power. Can you see where im going with this?

Hate to break it to ya mate but i setup cars for a living and have been working in 1 of the most reputable shops in this land/ possibly in the world who sell parts globally and setup the worlds fastest time attack cars. So im not just some internet muppet staring at graphs making assumptions talking shit via a keyboard.

Whats your claim to fame?

well you said PAULS FIGURE BEATS SIMONS!

I was stating twice now that it's not a race so how does one lose if it's not a race?

So you work in a workshop, you must know everything?

This is why I think your not very smart and now it's on record Mick_o

How is a GTX2863 crammed in a 707160 -5 foreign housing an 88lb turbo ???

GARRETT DID NOT PROVIDE ANYONE A COMPRESSOR MAP FOR A GTX2863 IN A DASH 5 HOUSING! !

its that simple.

Sorry you don't understand, maybe I'm not famous enough for you to pay attention to me.

What if I said I hold the record for the heaviest bench press at my gym, would that be classed as a claim to faim?

Your clogging this thread up too btw.

Edited by mr skidz

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Before all the EFR fan boys come in, have a look at: https://www.garrettmotion.com/racing-and-performance/performance-catalog/turbo/g-series-ii-g30-825-58mm/ It also comes in a T4 1.06 divided housing. I would dare say if you want response & also decent power, this thing would chop.   AND apologies, just re-read your post, you've already bought the turbo... whatever you do, make sure you stick with divided housing and proper twin scroll manifold.
    • People have got to stop doing that. ShatGPT is not a search engine. It is a hallucination factory.   I also would recommend the 1.05. The .83 will "work" for you , in that it will be more responsive, but I think you'll find that it won't be anywhere near as good running it out to 8000rpm as the big housing will be.
    • Decided for the first time ever I would tow my car TO the track day on the same working theory as bringing tools and spares "if I have it I wont need it, but if I leave it behind i will 100% need it" all setup and ready to go out and try these A050 for the first time First session showed I needed to stiffen up the dampers a touch but still managed a few 1:21's without much effort. things were looking good. Came in a dropped the tyres down  to 26/28 as they had gotten to 35/33C from 22C cold The first lap of session two I managed to drop into 1:20's. Then in the second lap into the second session. Coming into T3 and I suddenly lost brake pedal followed by some huge rear end vibrations and scraping sounds. Got it back into the pits after session ended and found this. in the attached video, all of the wobble is in the hub its self, wheel is mint, and bearing feels tight. lKXLqpd - Imgur.mp4   Deciding it was a bent spindle I tried to find bearing/hub assembly locally but was unsuccessful so it was loaded back onto the trailer i luckily brought it on to drag it back home  
    • 1.05 you’ve gotta let it breath 
    • You have to continuously fill it to avoid dry running. Personally the transmissions I've serviced have never been bad enough to justify doing this because it is definitely a pretty complicated and somewhat risky procedure compared to simply draining the pan, measuring what came out, then refilling with the exact same amount.
×
×
  • Create New...