Jump to content
SAU Community

Recommended Posts

You mean like how traction control was removed, engine sizes made smaller and rev limits reduced?

De-engineering comes from F1 rules not what the teams want. They would be driving computer controlled V8 turbos with continuously variable transmissions if they had free reign.

turbos banned, that fan car was banned aswell, how radical was that!

cheers

darren

  • Replies 231
  • Created
  • Last Reply

Top Posters In This Topic

Here is a mates R33 from a few years ago doing 10.6, stock RB25 below the head gasket and on straight 98.

Says in the comments 450rwkw and running a .82 GT3540? 128mph Trap speed doesn't really add up to 450rwkw lol

Edited by Super Drager

450kw on 20psi on a Dynapack set up in such a way it read real generous.

Not fiction parts:

Jun cams dialled to make peak power near 8000rpm

Thicker hg

Garrett GT3582R .82 at 20psi on Bp98

Stock below hg, only failed because oil pump drive gave up after a day of clipping a 8000ish limiter, and doing tens in a full weight car

Pretty sure it was on Chinese manifolds too

450kw on 20psi on a Dynapack set up in such a way it read real generous.

Not fiction parts:

Jun cams dialled to make peak power near 8000rpm

Thicker hg

Garrett GT3582R .82 at 20psi on Bp98

Stock below hg, only failed because oil pump drive gave up after a day of clipping a 8000ish limiter, and doing tens in a full weight car

Pretty sure it was on Chinese manifolds too

Ahhh that explains it, sounds like a 5spd too, very impressive!

Fast RWDs. What is the fastest GTS-T/GTT in the world? 9 secs? The fastest Supra I know of is Ryan Woon's in the States which does the quarter in 8 secs something. Its a demon- look it up in youtube

Fast RWDs. What is the fastest GTS-T/GTT in the world? 9 secs? The fastest Supra I know of is Ryan Woon's in the States which does the quarter in 8 secs something. Its a demon- look it up in youtube

Project GTST in the UK has done a 7.45

Fast RWDs. What is the fastest GTS-T/GTT in the world? 9 secs? The fastest Supra I know of is Ryan Woon's in the States which does the quarter in 8 secs something. Its a demon- look it up in youtube

woon was the king for a long time,for street type manual cars but he got beaten a long time go, SW is the manual king, auto wise theres faster..

cheers

darren

Edited by jet_r31

Jesus Christ, f**king SAU and its retardedness on dyno results.... despite any redundant wahhhing you guys have about the fact every dyno on the planet don't read the same as your glorified brake testing machines the car has done a ten, my link to the vid was about the ability to do a ten and nothing to do with power figures.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So for the wide band is a Bosch 4.9 correct for the Link G4+ along with a Can bus? Just get the Link gear or is generic ok too? Eg here: LINK LINK DIGITAL WIDEBAND CAN MODULE WITH BOSCH 4.9 SENSOR : KYP Performance House  
    • Bit difficult to follow. Have a look below and see what the standard R32 layout was like. Note there was a restrictor in place immediately before "turbocharged pressure control solenoid" that, if removed, magically got you 1 bar boost.
    • I might be way off the mark here.. there must be a T junction under the manifold. That takes manifold pressure through a check valve prior to the T, one side splits out to this bleed off orifice, the other straight to the wastegate actuators. 
    • Carrying out some engine due diligence before my first drive in a 260RS that has been in storage for 10+ years, and found two lines that are susposed to be plumbed into the boost control solenoid. One of the lines (the wastegate boost supply line) to actuate the gates, had a bolt in one end blocking it. The other line (main boost signal line) from the very rear of the intake manifold (RB26DETT) and runs up to the boost controller had this pill in the end of it as seen in photos. Other than the obvious (T28 Ceramic turbos might well be cooked)  Can anyone shed any light on if there is any validity at all with this mod, bleeding a constant fixed rate of manifold boost pressure off through this 3mm hole?  Is it deliberate?  Was this a 90s Jap mod done to RB26's? Or has someone just fitted this without any idea of what happens to ceramic T28s if they are not gate controlled?    
×
×
  • Create New...